Search NASA⌕ Search

Engineering topics

A D Harrington

Publications and source records attributed to A D Harrington.

4 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Mars Sample Return (MSR) Sample Receiving Facility (SRF) Assessment Study (MSAS)

The Mars Sample Return (MSR) campaign, initiated in 2020 with the launch of the Per-severance Rover, is an international partnership be-tween NASA and the European Space Agency (ESA) to return Martian geological samples to Earth for scientific study in the early 2030s. Not only is MSR the first mission to bring samples back to Earth from an-other planet, it is the first time since Apollo 14to have a mission classified as a Category V: Restricted Earth Return by the NASA Planetary Protection Office due to the possibility that the samples could harbor extra-terrestrial life. As a result of this classification, the Sample Receiving Facility (SRF)must not only pro-vide a pristine environment to ensure samples are protected from terrestrial contamination for scientific investigations, it must also provide high-containment (biosafety level 4 [BSL-4]-equivalence)to isolate the samples from Earth’s biosphere until the samples are deemed safe for release and/or sterilized.

Mars Sample Return↗
NASA NTRSDate not supplied

The Mars Sample Return Analogue Collection

The Mars 2020 Perseverance rover touched down in Jezero crater on February 18th, 2021, and sealed the first sample for Mars Sample Return (MSR) later that summer. As of sol 1088, 23 rock cores have been collected across a diverse set of lithologies that span rock types from sedimentary to igneous. As the cache on Perseverance continues to grow, the overall portfolio of MSR expands, creating long lasting implications for a wide net in the scientific community as well as supporting detailed analyses for generations to come. To best prepare for these precious samples to return to Earth one day, NASA and ESA are jointly planning to create a MSR Analogue Collection that will be available to the community in the near future.

M T Thorpe↗
NASA NTRSDate not supplied

MSR Curation Technology Development – Developing Protocols for Pre-Basic Characterization Measurements

The joint NASA/ESA Mars Sample Return (MSR) campaign could deliver to Earth the first pristine Mar-tian rock and regolith samples, collected by the Mars2020 science mission, Perseverance. In preparation for their arrival, the NASA/ESA Joint Curation Office (JCO) within the Sample Receiving Project (SRP) is developing curation technology needed to perform initial characterization of the samples while isolating samples from the Earth’s biosphere and protecting the samples from terrestrial contamination. (RSTA; Fig. 1). The Mars Sample Return Planning Group 2 (MSPG2) identified methods for achieving an array of potential science objectives for MSR outlined by the International MSR Objectives and Samples Team (iMOST) [1]. One category of methods, called Pre-Basic Characterization, recommends potential analyses that would happen before the Returnable Sample Tube Assemblies (RSTA; Figure 1) are opened: 1) Magnetometer & Magnetic Susceptibility; 2) X-ray Computed Tomography (XCT) Scanner [2]. To be in compliance with planetary protection requirements, and to limit the amount of time sample tubes are out-side of an isolated contamination-controlled environment, secondary containment is necessary. A Sample Tube Isolation Container (STIC) and Secondary Outer Containment Case (SOCC) is currently being developed at NASA JPL under the direction of the SRP JCO.

V Tu↗