Search NASA⌕ Search

Engineering topics

Aaron Berg

Publications and source records attributed to Aaron Berg.

4 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Comparison of high-resolution airborne soil moisture retrievals to SMAP soil moisture during the SMAP validation experiment 2016 (SMAPVEX16)

The NASA's Soil Moisture Active Passive (SMAP) mission conducted a field experiment with its partners over two 40-km agricultural domains in Iowa and Manitoba in the summer of 2016 to address concerns observed in SMAP soil moisture (SM) retrievals over agricultural areas. The experiment featured airborne Passive Active L-band System (PALS) flights over each domain with intensive ground measurements and dense networks of SM monitoring stations. With two intensive observation periods separated in time (May 28–June 20 and July 14–August 16), the flights captured both early-season/low vegetation and later-season/high-vegetation conditions. The comparison of the PALS brightness temperature (TB) measurements to the SMAP TB observed over the sites resulted in root mean square difference (RMSD) of 2.8 K and 4.0 K for vertical and horizontal polarizations, respectively. The subsequent SM analysis rescaled the PALS TB with the SMAP TB to allow equitable comparisons between the SM retrievals from the two instruments. The PALS SM retrieval algorithm used the SM sampled by the ground teams during the overpass days for tuning, and was parameterized by a high-resolution vegetation water content product calibrated using vegetation samples collected during the experiment. The tuning process was not able to find a satisfactory result with a temporally constant set of parameters in the single channel algorithm for the two intensive observation periods of the experiment. This result indicated that the rapid change in the vegetation structure during the growth stages and likely variation in the surface roughness conditions were not compatible with rigid parameterization over the entire period. However, using seasonally variable parameters we found that it was possible to retrieve soil moisture with satisfactory accuracy. Comparative analysis with the SMAP SM product included aggregation of the PALS SM to the SMAP pixel-scale. The RMSD between the PALS SM and the aggregated manual field samples was <0.04 m3/m3 with Pearson correlation >0.85 for both sites. The comparison between different in situ sources indicated that the soil moisture network measurements were not the source of the large biases observed for SMAP over the sites reported in earlier studies. Therefore, the results suggested the rapidly growing vegetation and the early-season surface condition changes not captured by the SMAP algorithm caused the SMAP retrieval errors. In addition, the significant deviations of the vegetation water content used by the SMAP product from the calibrated vegetation water content obtained during the experiment compounds the problem.

Andreas Colliander↗
NASA NTRS2017

Development and Assessment of the SMAP Enhanced Passive Soil Moisture Product

Launched in January 2015, the National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) observatory was designed to provide frequent global mapping of high-resolution soil moisture and freeze-thaw state every two to three days using a radar and a radiometer operating at L-band frequencies. Despite a hardware mishap that rendered the radar inoperable shortly after launch, the radiometer continues to operate nominally, returning more than two years of science data that have helped to improve existing hydrological applications and foster new ones.Beginning in late 2016 the SMAP project launched a suite of new data products with the objective of recovering some high-resolution observation capability loss resulting from the radar malfunction. Among these new data products are the SMAP Enhanced Passive Soil Moisture Product that was released in December 2016, followed by the SMAPSentinel-1 Active-Passive Soil Moisture Product in April 2017.This article covers the development and assessment of the SMAP Level 2 Enhanced Passive Soil Moisture Product (L2_SM_P_E). The product distinguishes itself from the current SMAP Level 2 Passive Soil Moisture Product (L2_SM_P) in that the soil moisture retrieval is posted on a 9 km grid instead of a 36 km grid. This is made possible by first applying the Backus-Gilbert optimal interpolation technique to the antenna temperature (TA) data in the original SMAP Level 1B Brightness Temperature Product to take advantage of the overlapped radiometer footprints on orbit. The resulting interpolated TA data then go through various correctioncalibration procedures to become the SMAP Level 1C Enhanced Brightness Temperature Product (L1C_TB_E). The L1C_TB_E product, posted on a 9 km grid, is then used as the primary input to the current operational SMAP baseline soil moisture retrieval algorithm to produce L2_SM_P_E as the final output. Images of the new product reveal enhanced visual features that are not apparent in the standard product. Based on in situ data from core validation sites and sparse networks representing different seasons and biomes all over the world, comparisons between L2_SM_P_E and in situ data were performed for the duration of April 1, 2015 October 30, 2016. It was found that the performance of the enhanced 9 km L2_SM_P_E is equivalent to that of the standard 36 km L2_SM_P, attaining a retrieval uncertainty below 0.040 m(exp 3)/m(exp 3) unbiased root-mean-square error (ubRMSE) and a correlation coefficient above 0.800. This assessment also affirmed that the Single Channel Algorithm using the V-polarized TB channel (SCA-V) delivered the best retrieval performance among the various algorithms implemented for L2_SM_P_E, a result similar to a previous assessment for L2_SM_P.

Enhanced↗