Search NASA⌕ Search

Engineering topics

Aaron, Douglas S.

Publications and source records attributed to Aaron, Douglas S..

4 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

High performance aluminum-air flow batteries through double-face architecture and laser-modified and friction-stir processed 3D anode

Aluminum-air batteries (AAB) are regarded as one of the most promising beyond-lithium high-energy-density storage candidates. Here, this paper introduces a three-dimensional (3D) Al 7075 anode enabled by femtosecond laser and friction-stir process which, along with a special double-face anode architecture provides world-class performance. Electrochemical characterizations prove that the corrosion resistance of the modified 3D Al 7075 FSP anode was enhanced, and electrochemically active surface area (ECSA) was increased compared with that of normal Al 7075 anode. Friction-stir processing reduced the mean grain size from 30 μm to 3 μm. The discharge performance of 3D Al 7075 FSP anode is shown to be quite stable, and the average values of energy density are significantly increased from 2256 mWh g –1 to 2941 mWh g –1 at 100 mA cm –2 . In a double-face flowing Al-air battery system, the 3D Al 7075 FSP anode exhibited significantly better electrocatalytic performance (discharge voltage of 0.76 V at 400 mA cm –2 , and power density of 337.8 mW cm –2 ) than that of a commercial Al 7075 anode.

25 ENERGY STORAGE↗
DOE OSTI2022

Separation of CO 2 from Flue Gas and Potential for Geologic Sequestration

The objectives of this study were to review various methods reported in the literature for the separation and geologic sequestration of carbon dioxide and evaluate the potential of TVA fossil fuel-burning plant locations for onsite geologic sequestration of CO 2 from stack emissions. Several conventional and nonconventional technologies for the separation of CO 2 from flue gas, including absorption, adsorption, cryogenic distillation, membranes, hydrate formation and dissociation, and ammonia carbonation, have been reviewed in terms of separation mechanisms, flow diagrams, and costs. Most of the technologies that have been reviewed are still at the research and development stage. Critical information needed to assess and compare these technologies is still lacking. In addition, information on some of the technologies that have been tested at a pilot or industrial scale has not been fully disclosed in the open literature. Because of this lack of data, it is difficult to make a critical assessment of each of the separation technologies. Based on limited information, it was concluded that the most promising methods are membrane separation and the Mitsubishi process for chemical absorption. Both processes involve separating CO 2 at high temperature, minimizing the cost for cooling prior to separation. Physical and chemical geologic formations of CO 2 were also reviewed. It was concluded that due to the geologic time scale of CO 2 sequestration periods, relatively safe conditions, general proximity to CO 2 sources, and extensive knowledge of underground conditions, sequestration of CO 2 in underground aquifers and coal beds is a very promising method of mitigating greenhouse gas emissions. The cost is predicted to be relatively low and the suitable sites are numerous for this application, with many of these sites located close to the plants.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Mass transport limitations in polymer electrolyte water electrolyzers using spatially-resolved current measurement

Here this work utilizes spatially-resolved current measurements to provide insight into mass transport limitations in electrolyzers that are not observable from traditional polarization measurement. In this study, two types of flow-fields (parallel and triple-serpentine) and two types of diffusion media (patterned porous thin titanium foil LGDLs and Ir-coated titanium felt PTLs) were examined. A non-uniform current distribution dominated by mass transport limitations was observed to be instigated by the restriction of liquid water transport to catalyst sites. Additionally, conditions are revealed which yield similar polarization performance but dissimilar current distributions. In such cases, the transport limitations for different architectures and porous media affect polarization in different regions of the active area. Furthermore, the triple-serpentine flow-field used in this study performs better than the parallel flow-field under mass transport limited operating conditions. This indicates that the parallel flow-field used in this study is more susceptible to starvation than the triple-serpentine flow-field for the electrolyzer studied.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗