Engineering topics
Publications and source records attributed to Abbasi, Nabeel Mujtaba.
Nitrogen and oxygen-donor ligands comprised of alkylimidazoles, tertiary amides, and diglycolamides were employed to form transition metal chelates in the preparation of twelve magnetic ionic liquids. Viscosities as low as 198 cP were achieved.
Genotoxic impurities (GTIs) are potential carcinogens that need to be controlled down to ppm or lower concentration levels in pharmaceuticals under strict regulations. The static headspace gas chromatography (HS-GC) coupled with electron capture detection (ECD) is an effective approach to monitor halogenated and nitroaromatic genotoxins. Deep eutectic solvents (DESs) possess tunable physico-chemical properties and low vapor pressure for HS-GC methods. In this study, zwitterionic and non-ionic DESs have been used for the first time to develop and validate a sensitive analytical method for the analysis of 24 genotoxins at sub-ppm concentrations. Compared to non-ionic diluents, zwitterionic DESs produced exceptional analytical performance and the betaine: 7 (1,4- butane diol) DES outperformed the betaine: 5 (1,4-butane diol) DES. Limits of detection (LOD) down to the 5-ppb concentration level were achieved in DESs. Wide linear ranges spanning over 5 orders of magnitude (0.005–100 µg g –1 ) were obtained for most analytes with exceptional sensitivities and high precision. The method accuracy and precision were validated using 3 commercially available drug substances and excellent recoveries were obtained. Finally, this study broadens the applicability of HS-GC in the determination of less volatile GTIs by establishing DESs as viable diluent substitutes for organic solvents in routine pharmaceutical analysis.
Magnetic ionic liquids (MILs) comprise a subcategory of ionic liquids (ILs) and contain a paramagnetic metal center allowing them to be readily manipulated by an external magnetic field. While MILs are popularly employed as solvents in catalysis, separations, and organic synthesis, most low viscosity combinations possess a hydrophilic character that limits their use in aqueous matrices. To date, no study has reported the synthesis and characterization of hydrophobic MILs with viscosities similar to those of hydrophilic MILs and organic solvents while simultaneously exhibiting enhanced magnetic and thermal properties. In this study, diglycolic acid esters are employed as ligands to chelate with paramagnetic metals to produce cations that are paired with metal chelates composed of hexafluoroacetylacetonate ligands to form MILs incorporating multiple metal centers in the cation and anion. Viscosity values below 31.6 cP were obtained for these solvents, the lowest ever reported for hydrophobic MILs. Solubilities in nonpolar solvents such as benzene were observed to be as high as 50% (w/v) MIL-to-solvent ratio while being insoluble in water at concentrations as low as 0.01% (w/v). Effective paramagnetic moment values for these solvents ranged from 5.33 to 15.56 Bohr magnetons (μB), with mixed metal MILs containing multiple lanthanides in the anion generally offering higher magnetic susceptibilities. MILs composed of ligands containing octyl substituents were found to possess thermal stabilities up to 190 °C. The synthetic strategies explored in this study exploit the highly tunable nature of the employed cation and anion pairs to design versatile ultra-low viscosity magnetoactive solvents that possess tremendous potential and applicability in liquid–liquid separation systems, catalysis, and microfluidics where the mechanical movement of the solvent can be easily facilitated using electromagnets.
Not Available
Deep eutectic solvents (DESs) formed by mixing zwitterionic hydrogen bond acceptors (HBAs) with diol- and organic acid-based hydrogen bond donors (HBDs) are popular sustainable solvents. In addition to possessing an amphiphilic character, zwitterionic DESs offer unique solvation properties, unlike those composed of halide-containing HBAs. While all other popular classes of DESs have been investigated, no study has attempted to characterize the solvation characteristics of zwitterionic DESs. In this study, the solvation properties of betaine [Bet]-, sulfobetaine-, and l-carnitine [l-Car]-based DESs were thoroughly investigated for the first time using solvatochromic dye methods and inverse gas chromatography (IGC). Herein, the Nile red polarity scale revealed that DESs composed of organic acids were generally more polar than diol-based DESs. Kamlet–Taft solvent parameters revealed that glycerol-based DESs offered exceptionally high hydrogen bond donating ability compared to those composed of 1,4-butane diol and triethylene glycol. The Abraham solvation parameter model revealed hydrogen bond basicity to be the most dominant interaction, and it was generally higher for diol-based HBDs compared to organic acid-based HBDs. Additionally, sulfobetaine HBAs possessing longer alkyl chains generally offered higher dispersive-type interactions and hydrogen bond basicity compared to [Bet] and [l-Car] salts. This is the first study to combine and compare results from solvatochromic dye methods and IGC in an attempt to comprehensively explain and predict the solvation characteristics of zwitterionic DESs.
Magnetic ionic liquids (MILs) containing paramagnetic centers have gained widespread recognition as sustainable solvents due to their ability to respond to an external magnetic field. The physico-chemical properties of MILs are dependent on the choice of anion/cation ligands and metal centers; the search for highly tunable ligands and precursors that can confer favorable characteristics, such as low viscosity, is ongoing. Diglycolamides employed as cationic ligands have been previously shown to form hydrophobic MILs that can simultaneously incorporate multiple lanthanide metal centers in both the anion/cation. Despite their enhanced magnetic susceptibility, the effect of diglycolamide chemical structure modifications on the physico-chemical properties of MILs has not been thoroughly studied. Additionally, the possibility of forming diglycolamide-based MILs with popularly employed transition metals has not been investigated and combinations that can simultaneously embed two different types of metal centers in both the anion/cation have not been explored. In this study, thirty (30) MILs comprised of lanthanide and transition metals were synthesized by examining their chelation to both straight-chained and branched diglycolamides. Here, transition metal-based MILs were found to possess high thermal stabilities up to 235 °C compared to 192 °C for those comprised of lanthanides. While MILs comprised of rare-earth metal centers exhibited the lowest viscosities, substituting lanthanides with transition metals in just the anion or cation resulted in enhanced thermal stability and reduced viscosity. The effective magnetic moment for these MILs varied between 4.71 and 21.08 µ B and was much higher compared to all previous classes of MILs prepared using the same metals. Results from this study explore all possible modifications that can be made to these MILs in an effort to demonstrate their structural tunability, which is often highly desirable in various applications, including organic synthesis and chemical separations.
The formation of eutectic mixtures from active pharmaceutical ingredients (APIs) has emerged as an effective technique to develop liquid pharmaceutical formulations. API-based deep eutectic solvents (DESs) enhance the water solubility of APIs and avoid their recrystallization. The physico-chemical properties of API-DESs can be easily modulated by judicious selection of a hydrogen bond acceptor (HBA) or hydrogen bond donor (HBD) excipient that is mixed with the API. Solvation properties of API-DESs can help in understanding the role of ionic and non-ionic excipients towards the overall solvation interactions of these DESs. In this study, the solvation characteristics of three subclasses of API-DESs containing API-HBAs, API-HBDs, or API-HBAs and API-HBDs are investigated. Inverse gas chromatography is employed to study solute-solvent interactions of a variety of probe molecules for twenty different API-DESs. Among the API-DESs comprised of API-HBAs and carboxylic acid or diol-based HBDs, DESs containing diol-based HBDs exhibited stronger dipolar, hydrogen bond basicity, and hydrogen bond acidity interactions compared to carboxylic acid-based HBDs. No significant differences were observed in the solvation properties of DESs comprised of API HBAs and API HBDs. API-DESs comprised of the choline chloride HBA and API-HBDs exhibited stronger hydrogen bond acidity and dipolarity and weaker dispersive-type interactions among the DESs evaluated in this study. An in-depth evaluation of solvation properties for these DESs is important to completely exploit their potential in separation science as well as the fields of biomaterial science, pharmaceutical chemistry, and biotechnology.
Choline chloride-based deep eutectic solvents (DESs) have gained widespread recognition as green solvents in catalysis and separation science as their designer properties permit solvation properties to be modulated by the choice of the hydrogen bond donor (HBD) as well as its molar ratio. Despite being one of the most popular classes of DESs, very little is currently understood regarding how their solvation characteristics differ among themselves as well as from other classes of DESs. Previous studies have shown that the catalytic activity, extraction efficiency, and solubilities of natural compounds can be influenced by the type of choline salt and HBD, but no study has systematically related these parameters with its solvation properties. In this study, inverse gas chromatography was employed for the first time to study the individual solvation characteristics of a diverse range of choline chloride and acetate-based DESs composed of amides, diols, organic acids, and carbohydrates. Furthermore, hydrogen bond acidity was found to be a dominant interaction for all DESs, especially those composed of organic acid HBDs. DESs composed of isomers of butane diol and hexane diol as HBDs exhibited higher hydrogen bond basicity and dispersive-type interactions compared to those composed of urea, acetamide, and organic acids with the position of the hydroxyl functional group influencing their solvation interactions. Choline acetate-based DESs exhibited lower dipolarity and stronger hydrogen bond basicity and dispersive-type interactions compared to choline chloride DESs. The solvation models developed in this study were used to interpret and explain DES behavior in previously reported studies involving catalysis, organic synthesis, and extractions demonstrating that the measured solute–solvent interactions can serve to predict the performance of choline chloride-based DESs when used in various applications.
Deep eutectic solvents (DESs) have gained increasing popularity in separation science due to the fact that their physico-chemical properties can be easily fine-tuned by varying the type or ratio of hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD). While it is well-known that the molar ratio of HBA/HBD affects the melting point of a eutectic mixture, much less is understood regarding its effect on the magnitude of individual solvation interactions. This is largely due to the fact that established solvatochromic dye methods lack sensitivity when the HBA/HBD ratio is varied slightly in a eutectic mixture. Herein, this study is the first to measure the variation of DES solvation interactions with small changes in the molar ratio of HBA/HBD using inverse gas chromatography (IGC). Solute-solvent interactions of three different DES systems comprised of ammonium salts and organic acids were examined. The probe molecules were studied for 18 eutectic mixtures of varied HBA and HBD composition. We report DES hydrogen bond basicity, hydrogen bond acidity, and dispersive-type interactions exhibited the greatest change when the molar ratio of HBA/HBD was varied in the eutectic mixture. Results from this study demonstrate that the HBA/HBD ratio can be used to modulate the solvation characteristics for this class of DESs in separations and that the stoichiometric ratio of the HBA/HBD is important in ensuring their reproducible preparation.
Deep eutectic solvents (DESs) constitute a rapidly emerging class of sustainable liquids that have been widely studied and employed in chemical separations, catalysis, and electrochemistry. The unique physicochemical and solvation properties of DESs can be highly tailored by choosing the appropriate hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD). Understanding the role of the HBA and HBD on the multiple solvation interactions in DESs is important to enable their judicious selection for particular applications. As such, this work constitutes the first study to exploit chromatography to measure solute–solvent interactions of DESs using a wide array of known probe molecules. The constituent components of 20 DESs, formed by ammonium and phosphonium-based salts and carboxylic acids, are systematically modulated to delineate the contribution of the HBA and HBD toward individual solvation properties. Solute–solvent interactions measured in this study are used to interpret and explain the performance of DESs in desulfurization of fuels and extraction of natural products. The results from this study can be used to predict and understand the performance of DESs in various chemical processes where solvation interactions heavily influence outcomes.
Deep eutectic solvents (DESs) have emerged as alternatives to conventional organic solvents and ionic liquids (ILs). Their tunable and designer physio-chemical properties, low cost, and ease of preparation make them attractive solvent systems for use in extractions and additives to chromatographic separations. However, due to the diverse range of hydrogen bond acceptors and donors that comprise DESs, choosing the appropriate solvent for separations can be challenging. This work discusses all methods of DES preparation and details their advantages and disadvantages. Since polarity is an important aspect in their use in separations, the classification of DESs based on the betaine dye and nile red scales as well as Kamlet-Taft parameters is also discussed. Finally, a summary of applications of DESs in various extraction processes (phenolics, fuels, metals, proteins, carbohydrates), solid-phase extraction, solid-phase microextraction, as well as capillary electrochromatography is provided.