Search NASA⌕ Search

Engineering topics

Abdallah, J.

Publications and source records attributed to Abdallah, J..

At least 19 records

Operation and performance of the ATLAS tile calorimeter in LHC Run 2

The ATLAS tile calorimeter (TileCal) is the hadronic sampling calorimeter covering the central region of the ATLAS detector at the Large Hadron Collider (LHC). This paper gives an overview of the calorimeter’s operation and performance during the years 2015–2018 (Run 2). In this period, ATLAS collected proton–proton collision data at a centre-of-mass energy of 13 TeV and the TileCal was 99.65% efficient for data-taking. The signal reconstruction, the calibration procedures, and the detector operational status are presented. The performance of two ATLAS trigger systems making use of TileCal information, the minimum-bias trigger scintillators and the tile muon trigger, is discussed. Studies of radiation effects allow the degradation of the output signals at the end of the LHC and HL-LHC operations to be estimated. Finally, the TileCal response to isolated muons, hadrons and jets from proton–proton collisions is presented. The energy and time calibration methods performed excellently, resulting in good stability and uniformity of the calorimeter response during Run 2. The setting of the energy scale was performed with an uncertainty of 2%. The results demonstrate that the performance is in accordance with specifications defined in the Technical Design Report.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The ATLAS experiment at the CERN Large Hadron Collider: a description of the detector configuration for Run 3

The ATLAS detector is installed in its experimental cavern at Point 1 of the CERN Large Hadron Collider. During Run 2 of the LHC, a luminosity of ℒ = 2 × 10 34 cm -2 s -1 was routinely achieved at the start of fills, twice the design luminosity. For Run 3, accelerator improvements, notably luminosity levelling, allow sustained running at an instantaneous luminosity of ℒ = 2 × 10 34 cm -2 s -1 , with an average of up to 60 interactions per bunch crossing. The ATLAS detector has been upgraded to recover Run 1 single-lepton trigger thresholds while operating comfortably under Run 3 sustained pileup conditions. A fourth pixel layer 3.3 cm from the beam axis was added before Run 2 to improve vertex reconstruction and b-tagging performance. New Liquid Argon Calorimeter digital trigger electronics, with corresponding upgrades to the Trigger and Data Acquisition system, take advantage of a factor of 10 finer granularity to improve triggering on electrons, photons, taus, and hadronic signatures through increased pileup rejection. The inner muon endcap wheels were replaced by New Small Wheels with Micromegas and small-strip Thin Gap Chamber detectors, providing both precision tracking and Level-1 Muon trigger functionality. Trigger coverage of the inner barrel muon layer near one endcap region was augmented with modules integrating new thin-gap resistive plate chambers and smaller-diameter drift-tube chambers. Tile Calorimeter scintillation counters were added to improve electron energy resolution and background rejection. Upgrades to Minimum Bias Trigger Scintillators and Forward Detectors improve luminosity monitoring and enable total proton-proton cross section, diffractive physics, and heavy ion measurements. These upgrades are all compatible with operation in the much harsher environment anticipated after the High-Luminosity upgrade of the LHC and are the first steps towards preparing ATLAS for the High-Luminosity upgrade of the LHC. This paper describes the Run 3 configuration of the ATLAS detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Erratum to: Search for single top-quark production via flavour-changing neutral currents at 8 TeV with the ATLAS detector

One correction is noted for the paper. The branching fraction ($\mathcal{B}$($W →{ℓv}$) = 0.3246 was not included in the conversion of the observed cross-section limit, σ x $\mathcal{B}$( $t →Wb$) x ($\mathcal{B}$($W →{ℓv}$) < 2.9to the coupling constants $κ_{ugt}$ and $κ_{cgt}$ and the branching fractions $\mathcal{B}$( $t →ug$) and $\mathcal{B}$( $t →cg$). The inclusion leads to weaker observed exclusion limits on the coupling constants divided by the scale of new physics of $k_{ugt}$/ Λ <10 x 10 -3 TeV -1 and $k_{cgt}$/Λ <23 x 10 -3 TeV -1 and on the branching fractions $\mathcal{B}$( $t →ug$) < 1.2 x10 -4 and $\mathcal{B}$( $t →cg$) < 6.4 x 10 -4 . The predicted exclusion limits on the coupling constants divided by the scale of new physics are $k_{ugt}$/ Λ < 9.5 x 10 -3 TeV -1 and $\mathcal{B}$( $t →cg$)/ Λ < 22 x 10 -3 TeV -1 and on the branching fractions $\mathcal{B}$( $t →ug$) < 1.1 x 10 -4 and $\mathcal{B}$( $t →cg$) < 5.7 x 10 -4 . Updated distributions of the observed upper limits on the coupling constants for combinations of cgt and ugt channels are shown in Figure 10a and on the branching fractions in Figure 10b.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

X-ray heating and electron temperature of laboratory photoionized plasmas

We discuss experimental and modeling results for the x-ray heating and temperature of laboratory photoionized plasmas. A method is used to extract electron temperature based on the analysis of transmission spectroscopy data that is independent of atomic kinetics modeling. Boltzmann kinetic and radiation-hydrodynamics simulations emphasized the critical interplay between atomic physics and heating in photoionized plasmas. They also demonstrated the dramatic impact of photoexcitation on excited state populations, line emissivity, and radiation cooling. Temperature calculations performed with astrophysical codes significantly overestimated the measurement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Erratum to: Measurement of the W boson polarisation in $t\bar{t}$ events from pp collisions at $\sqrt{s} = 8~\hbox {TeV}$ in the lepton + jets channel with ATLAS

A bug in the code used to calculate the total correlation coefficients between the W boson helicity fractions obtained using the leptonic analyser in semileptonic $t\bar{t}$ events in the region with ≥ 2 b -tags was found. It led to quoting incorrect correlation coefficients in the original paper.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Operation and performance of the ATLAS Tile Calorimeter in Run 1

The Tile Calorimeter is the hadron calorimeter covering the central region of the ATLAS experiment at the Large Hadron Collider. Approximately 10,000 photomultipliers collect light from scintillating tiles acting as the active material sandwiched between slabs of steel absorber. This paper gives an overview of the calorimeter’s performance during the years 2008–2012 using cosmic-ray muon events and proton–proton collision data at centre-of-mass energies of 7 and 8 TeV with a total integrated luminosity of nearly 30 fb –1 . The signal reconstruction methods, calibration systems as well as the detector operation status are presented. The energy and time calibration methods performed excellently, resulting in good stability of the calorimeter response under varying conditions during the LHC Run 1. Lastly, the Tile Calorimeter response to isolated muons and hadrons as well as to jets from proton–proton collisions is presented. The results demonstrate excellent performance in accord with specifications mentioned in the Technical Design Report.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of quarkonium production in proton–lead and proton–proton collisions at $5.02~\mathrm {TeV}$ with the ATLAS detector

The modification of the production of J/ψ, ψ(2S), and Υ(nS) (n=1,2,3) in p+Pb collisions with respect to their production in pp collisions has been studied. The p+Pb and pp datasets used in this paper correspond to integrated luminosities of 28 nb –1 and 25 pb –1 respectively, collected in 2013 and 2015 by the ATLAS detector at the LHC, both at a centre-of-mass energy per nucleon pair of 5.02 TeV. The quarkonium states are reconstructed in the dimuon decay channel. The yields of J/ψ and ψ(2S) are separated into prompt and non-prompt sources. The measured quarkonium differential cross sections are presented as a function of rapidity and transverse momentum, as is the nuclear modification factor, R pPb for J/ψ and Υ(nS). No significant modification of the J/ψ production is observed while Υ(nS) production is found to be suppressed at low transverse momentum in p+Pb collisions relative to pp collisions. In conclusion, the production of excited charmonium and bottomonium states is found to be suppressed relative to that of the ground states in central p+Pb collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the W-boson mass in pp collisions at $\sqrt{s}=7 TeV$ with the ATLAS detector

A measurement of the mass of the W boson is presented based on proton–proton collision data recorded in 2011 at a centre-of-mass energy of 7 TeV with the ATLAS detector at the LHC, and corresponding to 4.6 fb -1 of integrated luminosity. The selected data sample consists of 7.8 × 10 6 candidates in the W→μν channel and 5.9×10 6 candidates in the W→eν channel. The W-boson mass is obtained from template fits to the reconstructed distributions of the charged lepton transverse momentum and of the W boson transverse mass in the electron and muon decay channels, yielding m W =80370 ± 7 (stat.) ± 11 (exp.syst.) ±14 (mod.syst.) MeV = 80370 ± 19 MeV where the first uncertainty is statistical, the second corresponds to the experimental systematic uncertainty, and the third to the physics-modelling systematic uncertainty. Finally, a measurement of the mass difference between the W + and W - bosons yields m W + -m W = -29 ± 28 MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the cross-section for producing a W boson in association with a single top quark in pp collisions at $\sqrt{s}=13 $ TeV with ATLAS

The inclusive cross-section for the associated production of a W boson and top quark is measured using data from proton-proton collisions at s√=13 TeV. The dataset corresponds to an integrated luminosity of 3.2 fb -1 , and was collected in 2015 by the ATLAS detector at the Large Hadron Collider at CERN. Events are selected requiring two opposite sign isolated leptons and at least one jet; they are separated into signal and control regions based on their jet multiplicity and the number of jets that are identified as containing b hadrons. The W t signal is then separated from the $t\bar{t}$ background using boosted decision tree discriminants in two regions. The cross-section is extracted by fitting templates to the data distributions, and is measured to be σ W t =94 ± 10(stat.) -22 +28 (syst.)±2(lumi.) pb. Lastly, the measured value is in good agreement with the SM prediction of σ theory = 71.7±1.8 (scale)± 3.4 (PDF) pb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Determination of the strong coupling constant $\alpha _\mathrm {s}$ from transverse energy–energy correlations in multijet events at $\sqrt{s} = 8~\hbox {TeV}$ TeV using the ATLAS detector

In this study, measurements of transverse energy–energy correlations and their associated asymmetries in multi-jet events using the ATLAS detector at the LHC are presented. The data used correspond to √s=8 TeV proton–proton collisions with an integrated luminosity of 20.2 fb –1 . The results are presented in bins of the scalar sum of the transverse momenta of the two leading jets, unfolded to the particle level and compared to the predictions from Monte Carlo simulations. A comparison with next-to-leading-order perturbative QCD is also performed, showing excellent agreement within the uncertainties. From this comparison, the value of the strong coupling constant is extracted for different energy regimes, thus testing the running of α s (μ) predicted in QCD up to scales over 1 TeV. A global fit to the transverse energy–energy correlation distributions yields α s (m Z ) = 0.1162±0.0011(exp.) +0.0084 –0.0070 (theo.) , while a global fit to the asymmetry distributions yields a value of α s (m Z ) = 0.1196±0.0013(exp.) +0.0075 –0.0045 (theo.).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of the material of the ATLAS inner detector for Run 2 of the LHC

The ATLAS inner detector comprises three different sub-detectors: the pixel detector, the silicon strip tracker, and the transition-radiation drift-tube tracker. The Insertable B-Layer, a new innermost pixel layer, was installed during the shutdown period in 2014, together with modifications to the layout of the cables and support structures of the existing pixel detector. The material in the inner detector is studied with several methods, using a low-luminosity √s=13 TeV pp collision sample corresponding to around 2.0 nb -1 collected in 2015 with the ATLAS experiment at the LHC. In this paper, the material within the innermost barrel region is studied using reconstructed hadronic interaction and photon conversion vertices. For the forward rapidity region, the material is probed by a measurement of the efficiency with which single tracks reconstructed from pixel detector hits alone can be extended with hits on the track in the strip layers. The results of these studies have been taken into account in an improved description of the material in the ATLAS inner detector simulation, resulting in a reduction in the uncertainties associated with the charged-particle reconstruction efficiency determined from simulation.

47 OTHER INSTRUMENTATION↗

Analysis of the Wtb vertex from the measurement of triple-differential angular decay rates of single top quarks produced in the t -channel at $ \sqrt{s}=8 $ TeV with the ATLAS detector

The electroweak production and subsequent decay of single top quarks in the t-channel is determined by the properties of the Wtb vertex, which can be described by the complex parameters of an effective Lagrangian. We use an analysis of a triple-differential decay rate in t-channel production to simultaneously determine five generalised helicity fractions and phases, as well as the polarisation of the produced top quark. The complex parameters are then constrained. This analysis is based on 20.2 fb -1 of proton-proton collision data at a centre-of-mass energy of 8 TeV collected with the ATLAS detector at the LHC. The fraction of decays containing transversely polarised W bosons is measured to be f 1 = 0.30 ± 0.05. The phase between amplitudes for transversely and longitudinally polarised W bosons recoiling against left-handed b-quarks is measured to be δ - = 0.002π + 0.017π + 0.016π , giving no indication of CP violation. The fractions of longitudinal or transverse W bosons accompanied by right-handed b-quarks are also constrained. Based on these measurements, limits are placed at 95% CL on the ratio of the complex coupling parameters Re [g R /V L ϵ [-0.12, 0.17] and Im [g R /V L ϵ [-0.07, 0.06]. Constraints are also placed on the ratios |V R /V L | and |g L /V L |. Additionally, the polarisation of single top quarks in the t-channel is constrained to be P > 0.72 (95% CL). None of the above measurements make assumptions about the value of any of the other parameters or couplings and all of them are in agreement with the Standard Model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of detector-corrected observables sensitive to the anomalous production of events with jets and large missing transverse momentum in ${pp}$ $\mathbf {\sqrt{s}=13}$TeV using the ATLAS detector

Observables sensitive to the anomalous production of events containing hadronic jets and missing momentum in the plane transverse to the proton beams at the Large Hadron Collider are presented. The observables are defined as a ratio of cross sections, for events containing jets and large missing transverse momentum to events containing jets and a pair of charged leptons from the decay of a Z/γ* boson. This definition minimises experimental and theoretical systematic uncertainties in the measurements. This ratio is measured differentially with respect to a number of kinematic properties of the hadronic system in two phase-space regions; one inclusive single-jet region and one region sensitive to vector-boson-fusion topologies. The data are found to be in agreement with the Standard Model predictions and used to constrain a variety of theoretical models for dark-matter production, including simplified models, effective field theory models, and invisible decays of the Higgs boson. Lastly, the measurements use 3.2 fb –1 of proton–proton collision data recorded by the ATLAS experiment at a centre-of-mass energy of 13 TeV and are fully corrected for detector effects, meaning that the data can be used to constrain new-physics models beyond those shown in this paper.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of b -hadron pair production with the ATLAS detector in proton-proton collisions at $ \sqrt{s}=8 $ TeV

Here, a measurement of b -hadron pair production is presented, based on a data set corresponding to an integrated luminosity of 11.4 fb –1 of proton-proton collisions recorded at √s = 8 TeV with the ATLAS detector at the LHC. Events are selected in which a b-hadron is reconstructed in a decay channel containing J/ψ → μμ, and a second b -hadron is reconstructed in a decay channel containing a muon. Results are presented in a fiducial volume defined by kinematic requirements on three muons based on those used in the analysis. The fiducial cross section is measured to be 17.7 ± 0.1(stat.) ± 2.0(syst.) nb. A number of normalised differential cross sections are also measured, and compared to predictions from the Pythia8, Herwig++, MadGraph5_aMC@NLO+Pythia8 and Sherpa event generators, providing new constraints on heavy flavour production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗