Search NASA⌕ Search

Engineering topics

Abdel-Gawad, M.

Publications and source records attributed to Abdel-Gawad, M..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Analysis of tectonic features in US southwest from Skylab photographs

The author has identified the following significant results. Skylab photographs were utilized to study faults and tectonic lines in selected areas of the U.S. Southwest. Emphasis was on elements of the Texas Zone in the Mojave Desert and the tectonic intersection in southern Nevada. Transverse faults believed to represent the continuation of the Texas Zone were found to be anomalous in strike. This suggests that the Mojave Desert block was rotated counterclockwise as a unit with the Sierra Nevada. Left-lateral strike-slip faults in Lake Mead area are interpreted as elements of the Wasatch tectonic zone; their anomalous trend indicates that the Lake Mead area has rotated clockwise with the Colorado Plateau. A tectonic model relating major fault zones to fragmentation and rotation of crustal blocks was developed. Detailed correlation of the high resolution S190B metric camera photographs with U-2 photographs and geologic maps demonstrates the feasibility of utilizing S190B photographs for the identification of geomorphic features associated with recent and active faults and for the assessment of seismic hazards.

Abdel-Gawad, M.↗
NASA NTRS1975

Mineral target areas in Nevada from geological analysis of LANDSAT-1 imagery

Geological analysis of LANDSAT-1 Scene MSS 1053-17540 suggests that certain known mineral districts in east-central Nevada frequently occur near faults or at faults or lineament intersections and areas of complex deformation and flexures. Seventeen (17) areas of analogous characteristics were identified as favorable targets for mineral exploration. During reconnaissance field trips eleven areas were visited. In three areas evidence was found of mining and/or prospecting not known before the field trips. In four areas favorable structural and alteration features were observed which call for more detailed field studies. In one of the four areas limonitic iron oxide samples were found in the regolith of a brecciated dolomite ridge. This area contains quartz veins, granitic and volcanic rocks and lies near the intersection of two linear fault structures identified in the LANDSAT-1 imagery. Semiquantitative spectroscopic analysis of selected portions of the samples showed abnormal contents of arsenic, molybdenum, copper, lead, zinc, and silver. These limonitic samples found were not in situ and further field studies are required to assess their source and significance.

Abdel-Gawad, M.↗
NASA NTRS1975

Identification and interpretation of tectonic features from Skylab imagery

The author has identified the following significant results. Surface indications of recent faulting are generally observed in EREP S190B photographs. Comparison of secondary roads (asphalt and dirt) registered in EREP and U-2 photographs together with field measurements shows that dirt and asphalt roads about seven meters wide can be detected in EREP S190B photographs where sufficient contrast exists between the tone of the road surface and surrounding terrain. In low contrast cases, roads more than ten meters wide could not be detected.

Abdel-Gawad, M.↗
NASA NTRS1975

Identification and interpretation of tectonic features from ERTS-1 imagery: Southwestern North America and the Red Sea area

The author has identified the following significant results. The ERTS-1 imagery was utilized to study major fault and tectonic lines and their intersections in southwestern North America. A system of transverse shear faults was recognized in the California Coast Ranges, the Sierra Nevada, the Great Basin, and Mexico. They are interpreted as expressions of a major left-lateral shear which predated the San Andreas system, the opening of the Gulf of California and Basin and Range rift development. Tectonic models for Basin and Range, Coast Ranges, and Texas-Parras shears were developed. Geological structures and Precambrian metamorphic trend lines of schistosity were studied across the Red Sea rift.

Abdel-Gawad, M.↗
NASA NTRS1975

Identification and interpretation of tectonic features from Skylab imagery

The author has identified the following significant results. The fault pattern in the southern Nevada tectonic intersection and adjacent Mojave block was found to be consistent with a model partly suggested by Hamilton and Myers (1966). The model has the following basic elements: (1) a major Laramide left-lateral shear on the Texas Zone, (2) counterclockwise rotation of the Sierra Nevada-Klamath Mountain block, (3) clockwise rotation of the Colorado Plateau, and (4) crustal extension and intrusion of volcanics in Nevada.

Abdel-Gawad, M.↗
NASA NTRS1975

Identification and interpretation of tectonic features from Skylab imagery

The author has identified the following significant results. Two alternate models for the extension of the Texas zone through the Mojave Desert block have been developed: (1) along the Pisgah Line, and (2) along the eastern Transverse Ranges; this model suggests a counterclockwise rotation of the Mojave block. Analysis of S190B photographs of the western Mojave Desert provides strong evidence for the feasibility of identifying recent fault breaks.

Abdel-Gawad, M.↗
NASA NTRS1974

Identification and interpretation of tectonic features from Skylab imagery

The author has identified the following significant results. A remarkable system of northwest and west-northwest trending faults was found to continue from eastern California into southwestern Arizona. The most significant is a fault belt which extends from west of Marble Mountains (southeastern California) across the Colorado River at Parker Valley towards Silver Bell Mountains, southern Arizona.

Abdel-Gawad, M.↗
NASA NTRS1974

Identification and interpretation of tectonic features from Skylab imagery

The author has identified the following significant results. S190-B imagery confirmed previous conclusions from S190-A that the Garlock fault does not extend eastward beyond its known termination near the southern end of Death Valley. In the Avawatz Mountains, California, two faults related to the Garlock fault zone (Mule Spring fault and Leach Spring fault) show evidence of recent activity. There is evidence that faulting related to Death Valley fault zone extends southeastward across the Old Dad Mountains. There, the Old Dad fault shows evidence of recent activity. A significant fault lineament has been identified from McCullough Range, California southeastward to Eagle Tail Mountains in southwestern Arizona. The lineament appears to control tertiary and possible cretaceous intrusives. Considerable right lateral shear is suspected to have taken place along parts of this lineament.

Abdel-Gawad, M.↗
NASA NTRS1974

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. The transverse faults observed in the central Coast Ranges of California are believed to represent the remnants of a major system of shear faults older than the San Andreas system. The transverse shear system is believed to have developed in the Mesozoic when the Pacific Plate was advancing under the North American Plate. Shear faults thus developed due to unequal rates of underthrusting. This tectonic model indicates that the intrusive belt of the proto-Sierra Nevada and the belt of eugeosynclinal sedimentary belt (Franciscan group) which lay to the west were both subjected to regional left-handed shear. Later development of the San Andreas system as transform faults of the East Pacific Rise changes the tectonic style to right-lateral tangential. The model explains the peculiar distribution of the Franciscan rocks in the Diablo Range east of the San Andreas fault and in Santa Lucia Range west of Nacimiento fault and the presence of Sierra Nevada type granitic blocks in between the two faults in the Salinia block. This model is also consistent with an analysis of the Texas and Parras shears which indicates that the southwestern part of North America has been subjected to a major left-lateral regional shear before the development of the San Andreas fault system.

Abdel-Gawad, M.↗
NASA NTRS1974

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. ERTS-1 imagery shows that the southern segment of the San Gabriel fault which controls the west fork of the San Gabriel River is strikingly similar to the Mill Creek Fault in the San Bernardino Mountains. It has also been noted that there is a similarity between the Sierra Madre thrust zone of the San Gabriel Mountains to the Banning thrust of the San Bernardino Mountains. This suggests that the southern San Gabriel fault was once continuous with the Mill Creek fault. When the San Bernardino Mountain block is theoretically moved to the northwest along the San Jacinto fault so that the Mill Creek fault is aligned with the southern part of the San Gabriel fault, it was found that the four transverse fault segments become aligned with the Pinto Fault on the east and with the Raymond-Santa Monica Malibu Fault zone on the west. The reconstruction identifies a continuous zone of transverse faulting extending from the Colorado River Desert to the Pacific. It seems likely that the entire fault zone was once a continuous left-lateral shear. This Anacapa Shear has probably been subjected to a 50 km left lateral movement. This analysis strongly indicates that the tectonic history of the Transverse Range has been characterized by left lateral shear on transverse faults and right lateral shear on the San Andreas fault system.

Abdel-Gawad, M.↗
NASA NTRS1974

Identification and interpretation of tectonic features from ERTS-A imagery

The author has identified the following significant results. A set of criteria characterizing known mineralized areas are: (1) occurrence at structural bends, discontinuities, complex deformations along fault zones and intersections; (2) complex terrain textures produced by fracture intersections; (3) color and tone anomalies produced by igneous intrusives, alteration effects, and oxidation. Significant fracture systems which appear to be most commonly related to mineralization in central and northeastern Nevada trend northeast-southwest, north-south, and north-northwest. In the area from Goldfield and Beatty, Nevada, to south of Las Vegas, ERTS-1 and Skylab imagery have been examined together to study an apparent correlation of mineralized areas with suspected hydrothermal alteration effects. It was observed that areas of mineralization are of complex structure, usually cut by many fractures, and sometimes have a similar mottled or variegated appearance. Although the Beatty-Rhyolite mining district is now largely inactive, several analogous areas not known to be mineralized have been identified. Identification of specific mineral prospects within general targets requires extensive field work and detailed geophysical exploration.

Abdel-Gawad, M.↗
NASA NTRS1974

Tectonic analysis of Baja California and Parras shear belt in Mexico

The author has identified the following significant results. Geological correlation of terrain across the Gulf of California using ERTS-1 imagery revealed significant similarities between Isla Tiburon, Isla Angel de la Guarda, and the San Carlos Range in mainland Mexico. ERTS-1 imagery was used to check the validity of the existence of major trans-Baja fault zones. ERTS-1 imagery also shows that high albedo sediments similar to known late Tertiary marine sediments are widespread in southern and middle Baja and extend in places to the eastern side of the Peninsula. Major faults in northern Mexico and across the border in the United States were mapped, and ample evidence was found that the Parras and parts of the Texas lineament are belts of major transverse shear faults in areas outside the supposed limit of the Texas and Parras lineaments. A fundamental concept which may help explain many complexities in the tectonic development is beginning to emerge: The southwestern part of North America was torn by massive left-lateral shear of transverse trend (east-west) during the compressive stage of the late Mesozoic and early Cenozoic. This tectonic style has changed into tensional rifting (Basin and Range) and right-lateral shear later in the Cenozoic and Quaternary.

Abdel-Gawad, M.↗
NASA NTRS1973

Identification and interpretation of tectonic features from ERTS-A imagery

The author has identified the following significant results. When comparing the ERTS-1 imagery with the United States Air Force Operational Navigation Chart, mapping errors were found in Baja California and in the coastal islands off mainland Mexico. One dramatic error noted was the Isla Tortuga which is located 9 to 9.5 km to the west of its photo location. One ERTS-1 photo shows the size of the four islands, Isla San Juanito, Isla Maria Madre, Isla Maria Magdalena, and Isla Maria Cleofas, to be much smaller than the ONC map depicts them. A prominent zone of structural and physiographic lineaments extending approximately from San Fernando, Los Angeles County towards the Oxnard area in Ventura County in an east-north-east trend were observed. In Ventura County several previously unknown faults within this zone were identified and their traces plotted on large scale maps and 1:60,000 aerial photographs. This important fault zone is significant because it trends parallel to and partly coincides with a recent belt of seismicity related to the San Fernando 1971 earthquake.

Abdel-Gawad, M.↗
NASA NTRS1973

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. Significant results from ERTS-1 imagery are: (1) Several new lineaments or faults have been identified. (2) Study of navigational maps and the ERTS-1 imagery suggests significant mapping errors in the geodetic position of Baja California.

Abdel-Gawad, M.↗
NASA NTRS1973

Seismicity and recent faulting in eastern California and western and central Nevada: A preliminary report

The author has identified the following significant results. ERTS-1 imagery covering the eastern California-Nevada seismic belt were utilized to study the fault pattern in relation to the distribution of earthquake epicenters and Quaternary volcanic rocks. Many suspected faults not previously mapped were identified. These include several suspected shear zones in Nevada, faults showing evidence of recent breakage, and major lineaments. Highly seismic areas are generally characterized by Holocene faulting and Quaternary volcanic activity. However, several major fault segments showing evidence of recent breakage are associated with little or no seismicity. The tectonic pattern strongly suggests that the eastern California-Nevada seismic belt coincides with a major crustal rift associated with zones of lateral shear. New data on potentially active fault zones have direct practical applications in national and local earthquake hazard reduction programs. Positive contacts have been made with Kern and Ventura Counties to make results of this investigation available for application to their earthquake hazards definition projects.

Abdel-Gawad, M.↗
NASA NTRS1973

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. The spatial relation of mercury deposits and faults in California coast ranges suggests regional structural control whereby the transverse faults and associated zones of weakness provided easy conduits for the ascent of hydrothermal solutions and emplacement of mercury ore. If proved valid, this relation identifies transverse fault zones as favorable structural guides for mercury exploration.

Abdel-Gawad, M.↗