Engineering topics

Abdelhameed, A.

Publications and source records attributed to Abdelhameed, A..

6 records

DOE OSTI2024

Assessment and validation of NEAMS tools for high-fidelity multiphysics transient modeling of microreactors: Application of NEAMS codes to perform multiphysics modeling analyses of micro-reactor concepts

The NEAMS Multiphysics Applications team aims at providing assessment of code useability and functionality for microreactor design and analyses, together with demonstration of their capabilities to properly capture the steady-state and time-dependent behavior of different microreactor concepts. In FY-24, significant progress was achieved in improving multi-physics models of several microreactors systems: HP-MR, GC-MR and KRUSTY. These efforts focused on solving more complex multiphysics problems enabled by enhanced tools capability, verifying and validating results obtained, providing feedback to developers for suggested improvements, and sharing these models to facilitate user training. A series of new multiphysics transients were completed on the HP-MR (using Griffin/BISON/Sockeye) with core startup transient, control drum inadvertent rotation accident, and hydrogen leakage from hydride moderator (also including SWIFT). On the GC-MR, a new full-core model was developed and analyzed through a series of new multiphysics (Griffin/BISON/SAM) transients to simulate moderator leakage (also including SWIFT), flow blockage and coolant depressurization. Additional and updated TRISO failure analyses were completed on the HP-MR unit-cell and GC-MR assembly models leveraging improved TRISO modeling capabilities. The amount of SiC failure following accidental transients at end-of-life was null. However, GC-MR assembly TRISO analysis highlighted Pd penetration rate can be problematic and may require design changes on the studied microreactor concept. The neutronics discrepancies observed on the KRUSTY model in previous years were resolved using hybrid set of Monte Carlo/Deterministic cross-sections. The multiphysics (Griffin neutronics / BISON thermal-mechanics) 15₵ insertion transient simulation displayed good agreement when comparing with experimental data. Initial modeling of the 30 ₵ reactivity insertion also displays promising results. Such close agreement provides important validation data that can be leveraged by the NEAMS program and by microreactor vendors to support licensing of their technology. Finally, important experience was gathered with the NEAMS tools leading to several user feedback shared with tools developers, especially with regards to MOOSE mesh generator and Griffin. This project led to many publications demonstrating modeling capabilities, and to three models shared on the Virtual Test Bed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Values of Recovered Uranium from HALEU Used Nuclear Fuels (Rev. 1)

The value of the recovered uranium (RU) from high assay low-enriched uranium (HALEU) used nuclear fuels was evaluated. Three utilizations of the recovered uranium were considered in this study, which include the cases that RU is used as a fissile material of nuclear fuel, RU is reused in the original advanced reactor after reenrichment, and RU is reused in conventional light water reactors after down-blending. In this study, the RU values were identified by comparing the cost of making a unit mass of fuel with RU versus the fuel cost with the equivalent fresh enriched uranium (EU). A series of bounding analyses for calculating the fuel costs were conducted using several selected reactor types, which include microreactors, advanced thermal reactors, and fast reactors having a burnup of 2 – 165 GWd/t (with residual U-235 content in discharged fuels of 0.8 - 19.6%). This study concludes that RU having a residual U-235 content higher than ~7% would cost less than the fresh EU. The affordability increases as the residual U-235 content in RU increases. For instance, the fuel cost with RU having the residual U-235 content of 19.6% is about 85% cheaper than the fuel cost with the equivalent fresh EU. This study observed that reusing RU after reenrichment in the original microreactor is impractical because the U-235 content in the re-enriched RU fuel would need to be higher than the limit for low-enriched uranium (<20%) to provide the same burnup performance due to parasitic absorption from U-236. It is noted that this study focused on the recovery of uranium only, and the value of other fissile materials (such as Pu) in the used nuclear fuel was not considered even though those are bred significantly in fast reactors. In addition, the impacts of uncertainties in the cost data and the value of RU of TRISO fuels were not evaluated in this study due to the limited information on the cost data uncertainties and the separation cost from TRISO fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

High-fidelity multiphysics load following and accidental transient modeling of microreactors using NEAMS tools: Application of NEAMS codes to perform multiphysics modeling analyses of micro-reactor concepts

The feasibility of modeling microreactors using high-fidelity models with the Nuclear Energy Advanced Modeling and Simulation (NEAMS) tools is investigated in this report. Three overarching questions guided this research: can NEAMS tools readily be applied for high-fidelity multiphysics modeling of different types of transients in microreactor designs; how accurate are the results obtained; and are improvements needed in accuracy or user experience of NEAMS tools, especially considering newly developed capabilities? This work builds upon FY-2022 work, and two microreactor concepts considering heat pipe (HP-MR) and gas-cooled (GC-MR) technologies were further analyzed using high-fidelity multiphysics simulations. The NEAMS tools considered and coupled within the MultiApp environment are Griffin for neutronics, BISON for thermo-mechanics, Sockeye for heat pipe modeling (in HP-MR), SAM for 1D Fluid – 3D solid modeling of coolant channels and system modeling of balance of plant components (in GC-MR), and the SWIFT code for hydrogen redistribution in hydride moderator. The Heat Pipe MicroReactor (HP-MR) concept was further analyzed in FY-2023 to demonstrate the stochastic TRISO failure modeling capability in BISON to check operational limits of the TRISO fuel. A new full-core Gas-Cooled MicroReactor (GC-MR) model was developed based on the initial assembly-model used in Y-2022 and used for steady-state and accidental depressurization transient simulations. Accuracy of the simulations performed was assessed through 1) verification analyses completed on the different physics with code-to-code comparison, and 2) validation of the multiphysics simulations based on modeling of the Kilopower Reactor Using Stirling Technology (KRUSTY) experiment. In FY-2023, the mesh and model of KRUSTY was updated to closely match publicly available data, and the neutronic model was verified and validated against experimental control rod worth measurements. The multiphysics model of KRUSTY was developed and used for steady-state analysis and for modeling reactivity insertion transient. The calculated power increase and stabilization agrees well with experimental data following adjustment in fuel thermal expansion coefficient. As an important component of this project, the ANL team gathered experience with a wide range of NEAMS tools: the MOOSE Mesh System, Griffin, BISON, SWIFT, Sockeye, SAM, Workbench, and the MOOSE MultiApp System, and provided assessment of new capabilities. Noteworthy are the user assessment of the “vapor-only” flow model in Sockeye and development of a multiphysics startup transient in HP-MR unit cell for use as tutorial in Sockeye. The full-core GC-MR model was used for assessment of SAM for balance of plant modeling and for demonstrating the SWIFT code capability for hydrogen redistribution modeling in multiphysics transient analyses. In this process, several bugs/issues were identified and reported to developers. Finally, the assembly GC-MR model developed in FY-2022 coupling Griffin, BISON and SAM through flow blockage and rod ejection transients was published to the National Reactor Innovation Center (NRIC) Virtual Test Bed (VTB). The Heat Pipe MicroReactor (HP-MR) concept high-fidelity multiphysics coupling of Griffin/BISON/Sockeye in load-following and heat pipe failure transients was also published on the VTB. Those submissions are enabling thorough review of these models as well as wide distribution to industry, regulator, and university users. In this analysis, several new research questions were uncovered, and follow-up analyses are recommended to further improve some models, consider additional transients, and continue development of VTB models.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

ANS MultiApps tutorial

The Multiphysics Object-Oriented Simulation Environment (MOOSE) [1] is an open-source, parallel finite element framework which provides the foundation formany advanced modeling and simulation tools developed under the Department of Energy’s (DOE’s) Nuclear Energy Advanced Modeling and Simulation (NEAMS) program [2] for the analysis of advanced reactors. The MOOSE framework provides the common foundational capability on which many NEAMS codes for reactor analysis are built. The MOOSE framework also includes several systems to assemble unique workflows and coupling amongMOOSE-based applications. In particular, the MultiApp and Transfer systems are widely used to assemble different MOOSE-based or MOOSE- wrapped physics applications together to perform loosely or tightly coupled multiphysics simulations. The National Reactor Innovation Center’s (NRIC’s) Virtual Test Bed (VTB) [3] hosts publicly available nuclear reactor multiphysics simulation examples which leverage MOOSE’s MultiApp system to meet the modeling needs of different reactor types. The flexibility and robustness of coupling provided by MOOSE permits rapid development of coupled physics models for a wide range of reactor types and events.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

Assembling Multiphysics Nuclear Reactor Simulations Using the MOOSE Framework

The Multiphysics Object Oriented Simulation Environment (MOOSE) [1] is an open-source, parallel finite element framework which provides the foundation for many advanced modeling and simulation tools developed under the Department of Energy (DOE) Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program [2] for the analysis of advanced reactors. The MOOSE framework provides the common foundational capability on which many NEAMS codes for reactor analysis are built. The MOOSE framework also includes several systems to assemble unique workflows and couplingamong MOOSE-based applications. In particular, the MultiApp and Transfer Systems are widely used to assemble different MOOSE-based or MOOSE-wrapped physics applications together to perform loosely or tightly coupled multiphysics simulations. The National Reactor Innovation Center (NRIC) Virtual Test Bed (VTB) [3] hosts publicly available nuclear reactor multiphysics simulation examples which leverage MOOSE’s MultiApp System to meet the modeling needs of different reactor types. The flexibility and robustness of coupling provided by MOOSE permits rapid development of coupled physics models for a wide range of reactor types and events

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2022

Status of the NEAMS and ARC fast reactor tools integration to the NEAMS Workbench

The Workbench initiative was launched in FY-2017 within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to facilitate the transition from conventional tools to high-fidelity tools. The NEAMS Workbench provides a common user interface for model creation, real-time validation, execution, output processing, and visualization for integrated codes. The integration of the Argonne Reactor Computation (ARC) suite of codes into the NEAMS Workbench through the PyARC module was initiated in FY-2017. The ARC codes, which focus on fast reactor multiphysics analysis, contain both legacy codes like DIF3D and REBUS-3 that were developed with over 30 years of experience, and newer NEAMS additions like MC 2 -3, PERSENT, and PROTEUS. Recent work expended this integration to other tools to support the U.S. fast reactor community such as DASSH for sub-channel thermal-hydraulics, Griffin for high-fidelity deterministic transport calculations, and OpenMC for Monte Carlo simulations (with Shift integration planned for FY-2023). The integration of the “extended ARC” suite of codes into the NEAMS Workbench interface relies on the PyARC and PyGriffin modules to handles the pre- and post-processing of these codes input, and the runtime environment. The PyARC module together with the NEAMS Workbench interface are both released under Open Source Software licenses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗