Engineering topics

Abu-Odeh, Anas

Publications and source records attributed to Abu-Odeh, Anas.

6 records

DOE OSTI2024

A simple model for short-range ordering kinetics in multi-principal element alloys

Short-range ordering (SRO) in multi-principal element alloys influences material properties such as strength and corrosion. While some degree of SRO is expected at equilibrium, predicting the kinetics of its formation is challenging. We present a simplified isothermal concentration-wave (CW) model to estimate an effective relaxation time of SRO formation. Estimates from the CW model agree to within a factor of five with relaxation times obtained from kinetic Monte Carlo (kMC) simulations when above the highest ordering instability temperature. Further, the advantage of the CW model is that it only requires mobility and thermodynamic parameters, which are readily obtained from alloy mobility databases and Metropolis Monte Carlo simulations, respectively. The simple parameterization of the CW model and its analytical nature makes it an attractive tool for the design of processing conditions to promote or suppress SRO in multicomponent alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Barrier-free predictions of short-range ordering/clustering kinetics in binary FCC solid solutions

We present comparisons of kinetic Monte Carlo (kMC) simulations of isothermal short-range ordering (SRO) and clustering (SRC) kinetics in binary FCC alloys with a mean-field concentration wave (CW) model. We find that the CW model is able to give order-of-magnitude agreement with kMC simulations for ordering/clustering relaxation times over a wide range of temperatures and compositions. The advantage of the CW model is that it does not require parameterization of vacancy hopping energy barriers, which, for a concentrated alloy, becomes prohibitive. We assess limits in the accuracy of the model and discuss the effect of cooling rates as well as the extension to multi-component systems. Ultimately, the simplicity and performance of the CW model compared to kMC simulations suggests that it is a useful tool to connect with models of properties dependent on SRO/SRC as well as for designing thermal treatments to control formation of SRO/SRC.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Reconsidering short-range order in complex concentrated alloys

Abstract The seemingly contradictory state of research on short-range order in many-component alloys is addressed through a critical review of the characterization of face-centered-cubic 3 d systems. Despite the paucity of direct observations, the ordering of many widely studied alloys is argued to be primarily interesting for its potential ubiquity. To clarify this situation, future research directions are proposed with reference to historical results, including a review of the fundamental principles of ordering and clustering. Graphical abstract

36 MATERIALS SCIENCE↗

DOE OSTI2022

Structure and glide of Lomer and Lomer-Cottrell dislocations: Atomistic simulations for model concentrated alloy solid solutions

Lomer (L) and Lomer-Cottrell (LC) dislocations have long been considered to be central to work hardening in face-centered cubic (FCC) metals and alloys. These dislocations act as barriers of motion for other dislocations, and can serve as sites for twin nucleation. Recent focus on multicomponent concentrated FCC solid solution alloys has resulted in many reported observations of LC dislocations. While these and L dislocations are expected to have a role in the mechanical behavior of these alloys, little is understood about how variations in composition and associated fault energies change the response of these dislocations under stress. Here we present atomistic simulations of L and LC dislocations in a model Cu-Ni system and find that changes in composition and applied stress conditions result in a wide variety of responses, including changes in core configuration and (100) glide. The results are compared to and extend previous literature related to the nature of L/LC core structures and how they vary with respect to intrinsic materials properties and stress states. This study also provides insights into mechanisms such as twin nucleation that could have important implications for work hardening in FCC solid-solution alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order

Abstract Refractory high-entropy alloys (RHEAs) are designed for high elevated-temperature strength, with both edge and screw dislocations playing an important role for plastic deformation. However, they can also display a significant energetic driving force for chemical short-range ordering (SRO). Here, we investigate mechanisms underlying the mobilities of screw and edge dislocations in the body-centered cubic MoNbTaW RHEA over a wide temperature range using extensive molecular dynamics simulations based on a highly-accurate machine-learning interatomic potential. Further, we specifically evaluate how these mechanisms are affected by the presence of SRO. The mobility of edge dislocations is found to be enhanced by the presence of SRO, whereas the rate of double-kink nucleation in the motion of screw dislocations is reduced, although this influence of SRO appears to be attenuated at increasing temperature. Independent of the presence of SRO, a cross-slip locking mechanism is observed for the motion of screws, which provides for extra strengthening for refractory high-entropy alloy system.

36 MATERIALS SCIENCE↗

DOE OSTI2021

The chain of chirality transfer in tellurium nanocrystals

Despite persistent and extensive observations of crystals with chiral shapes, the mechanisms underlying their formation are not well understood. Although past studies suggest that chiral shapes can form because of crystallization in the presence of chiral additives, or because of an intrinsic tendency that stems from the crystal structure, there are many cases in which these explanations are not suitable or have not been tested. Here, an investigation of model tellurium nanocrystals provides insights into the chain of chirality transfer between crystal structure and shape. We show that this transfer is mediated by screw dislocations, and shape chirality is not an outcome of the chiral crystal structure or ligands.

36 MATERIALS SCIENCE↗