Search NASA⌕ Search

Engineering topics

Adams, D. L.

Publications and source records attributed to Adams, D. L..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Erratum to: Search for single top-quark production via flavour-changing neutral currents at 8 TeV with the ATLAS detector

One correction is noted for the paper. The branching fraction ($\mathcal{B}$($W →{ℓv}$) = 0.3246 was not included in the conversion of the observed cross-section limit, σ x $\mathcal{B}$( $t →Wb$) x ($\mathcal{B}$($W →{ℓv}$) < 2.9to the coupling constants $κ_{ugt}$ and $κ_{cgt}$ and the branching fractions $\mathcal{B}$( $t →ug$) and $\mathcal{B}$( $t →cg$). The inclusion leads to weaker observed exclusion limits on the coupling constants divided by the scale of new physics of $k_{ugt}$/ Λ <10 x 10 -3 TeV -1 and $k_{cgt}$/Λ <23 x 10 -3 TeV -1 and on the branching fractions $\mathcal{B}$( $t →ug$) < 1.2 x10 -4 and $\mathcal{B}$( $t →cg$) < 6.4 x 10 -4 . The predicted exclusion limits on the coupling constants divided by the scale of new physics are $k_{ugt}$/ Λ < 9.5 x 10 -3 TeV -1 and $\mathcal{B}$( $t →cg$)/ Λ < 22 x 10 -3 TeV -1 and on the branching fractions $\mathcal{B}$( $t →ug$) < 1.1 x 10 -4 and $\mathcal{B}$( $t →cg$) < 5.7 x 10 -4 . Updated distributions of the observed upper limits on the coupling constants for combinations of cgt and ugt channels are shown in Figure 10a and on the branching fractions in Figure 10b.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Design and performance of a 35-ton liquid argon time projection chamber as a prototype for future very large detectors

Liquid argon time projection chamber technology is an attractive choice for large neutrino detectors, as it provides a high-resolution active target and it is expected to be scalable to very large masses. Consequently, it has been chosen as the technology for the first module of the DUNE far detector. However, the fiducial mass required for “far detectors” of the next generation of neutrino oscillation experiments far exceeds what has been demonstrated so far. Scaling to this larger mass, as well as the requirement for underground construction places a number of additional constraints on the design. A prototype 35-ton cryostat was built at Fermi National Acccelerator Laboratory to test the functionality of the components foreseen to be used in a very large far detector. The Phase I run, completed in early 2014, demonstrated that liquid argon could be maintained at sufficient purity in a membrane cryostat. A time projection chamber was installed for the Phase II run, which collected data in February and March of 2016. The Phase II run was a test of the modular anode plane assemblies with wrapped wires, cold readout electronics, and integrated photon detection systems. While the details of the design do not match exactly those chosen for the DUNE far detector, the 35-ton TPC prototype is a demonstration of the functionality of the basic components. Measurements are performed using the Phase II data to extract signal and noise characteristics and to align the detector components. A measurement of the electron lifetime is presented, and a novel technique for measuring a track's position based on pulse properties is described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Erratum to: Measurement of the W boson polarisation in $t\bar{t}$ events from pp collisions at $\sqrt{s} = 8~\hbox {TeV}$ in the lepton + jets channel with ATLAS

A bug in the code used to calculate the total correlation coefficients between the W boson helicity fractions obtained using the leptonic analyser in semileptonic $t\bar{t}$ events in the region with ≥ 2 b -tags was found. It led to quoting incorrect correlation coefficients in the original paper.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

Photon detector system timing performance in the DUNE 35-ton prototype liquid argon time projection chamber

Here, the 35-ton prototype for the Deep Underground Neutrino Experiment far detector was a single-phase liquid argon time projection chamber with an integrated photon detector system, all situated inside a membrane cryostat. The detector took cosmic-ray data for six weeks during the period of February 1, 2016 to March 12, 2016. The performance of the photon detection system was checked with these data. An installed photon detector was demonstrated to measure the arrival times of cosmic-ray muons with a resolution better than 32 ns, limited by the timing of the trigger system. A measurement of the timing resolution using closely-spaced calibration pulses yielded a resolution of 15 ns for pulses at a level of 6 photo-electrons. Scintillation light from cosmic-ray muons was observed to be attenuated with increasing distance with a characteristic length of $155 \pm 28$ cm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Measurement of the W-boson mass in pp collisions at $\sqrt{s}=7 TeV$ with the ATLAS detector

A measurement of the mass of the W boson is presented based on proton–proton collision data recorded in 2011 at a centre-of-mass energy of 7 TeV with the ATLAS detector at the LHC, and corresponding to 4.6 fb -1 of integrated luminosity. The selected data sample consists of 7.8 × 10 6 candidates in the W→μν channel and 5.9×10 6 candidates in the W→eν channel. The W-boson mass is obtained from template fits to the reconstructed distributions of the charged lepton transverse momentum and of the W boson transverse mass in the electron and muon decay channels, yielding m W =80370 ± 7 (stat.) ± 11 (exp.syst.) ±14 (mod.syst.) MeV = 80370 ± 19 MeV where the first uncertainty is statistical, the second corresponds to the experimental systematic uncertainty, and the third to the physics-modelling systematic uncertainty. Finally, a measurement of the mass difference between the W + and W - bosons yields m W + -m W = -29 ± 28 MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

Measurement of the cross-section for producing a W boson in association with a single top quark in pp collisions at $\sqrt{s}=13 $ TeV with ATLAS

The inclusive cross-section for the associated production of a W boson and top quark is measured using data from proton-proton collisions at s√=13 TeV. The dataset corresponds to an integrated luminosity of 3.2 fb -1 , and was collected in 2015 by the ATLAS detector at the Large Hadron Collider at CERN. Events are selected requiring two opposite sign isolated leptons and at least one jet; they are separated into signal and control regions based on their jet multiplicity and the number of jets that are identified as containing b hadrons. The W t signal is then separated from the $t\bar{t}$ background using boosted decision tree discriminants in two regions. The cross-section is extracted by fitting templates to the data distributions, and is measured to be σ W t =94 ± 10(stat.) -22 +28 (syst.)±2(lumi.) pb. Lastly, the measured value is in good agreement with the SM prediction of σ theory = 71.7±1.8 (scale)± 3.4 (PDF) pb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Top-quark mass measurement in the all-hadronic $ t\overline{t} $ decay channel at $ \sqrt{s}=8 $ TeV with the ATLAS detector

The top-quark mass is measured in the all-hadronic top-antitop quark decay channel using proton-proton collisions at a centre-of-mass energy of √s=8 TeV with the ATLAS detector at the CERN Large Hadron Collider. The data set used in the analysis corresponds to an integrated luminosity of 20.2 fb – 1 . The large multi-jet background is modelled using a data-driven method. We obtained the top-quark mass from template fits to the ratio of the three-jet to the dijet mass. The three-jet mass is obtained from the three jets assigned to the top quark decay. And from these three jets the dijet mass is obtained using the two jets assigned to the W boson decay. The top-quark mass is measured to be 173.72 ± 0.55 (stat.) ± 1.01 (syst.) GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Fiducial, total and differential cross-section measurements of t-channel single top-quark production in pp collisions at 8 TeV using data collected by the ATLAS detector

Detailed measurements of t-channel single top-quark production are presented. They use 20.2 fb -1 of data collected by the ATLAS experiment in proton–proton collisions at a centre-of-mass energy of 8 TeV at the LHC. Total, fiducial and differential cross-sections are measured for both top-quark and top-antiquark production. The fiducial cross-section is measured with a precision of 5.8% (top quark) and 7.8% (top antiquark), respectively. The total cross-sections are measured to be σ tot (tq) = 56.7$+4.3\atop{-3.8}$ pb for top-quark production and σ tot ($\bar{t}q$) = 32.9$+3.0\atop{-2.7}$ pb for top-antiquark production, in agreement with the Standard Model prediction. In addition, the ratio of top-quark to top-antiquark production cross-sections is determined to be R t = 1.72 ± 0.09 . The differential cross-sections as a function of the transverse momentum and rapidity of both the top quark and the top antiquark are measured at both the parton and particle levels. The transverse momentum and rapidity differential cross-sections of the accompanying jet from the t-channel scattering are measured at particle level. In conclusion, all measurements are compared to various Monte Carlo predictions as well as to fixed-order QCD calculations where available.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Topological cell clustering in the ATLAS calorimeters and its performance in LHC Run 1

The reconstruction of the signal from hadrons and jets emerging from the proton–proton collisions at the Large Hadron Collider (LHC) and entering the ATLAS calorimeters is based on a three-dimensional topological clustering of individual calorimeter cell signals. The cluster formation follows cell signal-significance patterns generated by electromagnetic and hadronic showers. In this, the clustering algorithm implicitly performs a topological noise suppression by removing cells with insignificant signals which are not in close proximity to cells with significant signals. The resulting topological cell clusters have shape and location information, which is exploited to apply a local energy calibration and corrections depending on the nature of the cluster. Lastly, topological cell clustering is established as a well-performing calorimeter signal definition for jet and missing transverse momentum reconstruction in ATLAS.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

Measurements of electroweak $Wjj$ production and constraints on anomalous gauge couplings with the ATLAS detector

Measurements of the electroweak production of a W boson in association with two jets at high dijet invariant mass are performed using √s = 7 and 8 TeV proton–proton collision data produced by the Large Hadron Collider, corresponding respectively to 4.7 and 20.2 fb -1 of integrated luminosity collected by the ATLAS detector. Lastly, the measurements are sensitive to the production of a W boson via a triple-gauge-boson vertex and include both the fiducial and differential cross sections of the electroweak process.

43 PARTICLE ACCELERATORS↗