Search NASA⌕ Search

Engineering topics

Adams, M. J.

Publications and source records attributed to Adams, M. J..

1300 nm optically pumped quantum dot spin vertical external-cavity surface-emitting laser

We report a room temperature optically pumped Quantum Dot-based Spin-Vertical-External-Cavity Surface-Emitting laser (QD Spin-VECSEL) operating at the telecom wavelength of 1.3 μm. The active medium was composed of 5 × 3 QD layers; each threefold group was positioned at an antinode of the standing wave of the optical field. Circularly polarized lasing in the QD-VECSEL under Continuous-Wave optical pumping has been realized with a threshold pump power of 11 mW. We further demonstrate at room temperature control of the QD-VECSEL output polarization ellipticity via the pump polarization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Circular polarization switching and bistability in an optically injected 1300 nm spin-vertical cavity surface emitting laser

We report the experimental observation of circular polarization switching (PS) and polarization bistability (PB) in a 1300 nm dilute nitride spin-vertical cavity surface emitting laser (VCSEL). We demonstrate that the circularly polarized optical signal at 1300 nm can gradually or abruptly switch the polarization ellipticity of the spin-VCSEL from right-to-left circular polarization and vice versa. Moreover, different forms of PS and PB between right- and left-circular polarizations are observed by controlling the injection strength and the initial wavelength detuning. These results obtained at the telecom wavelength of 1300 nm open the door for novel uses of spin-VCSELs in polarization sensitive applications in future optical systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Control of emitted light polarization in a 1310 nm dilute nitride spin-vertical cavity surface emitting laser subject to circularly polarized optical injection

We experimentally demonstrate the control of the light polarization emitted by a 1310 nm dilute nitride spin-Vertical Cavity Surface Emitting Laser (VCSEL) at room temperature. This is achieved by means of a combination of polarized optical pumping and polarized optical injection. Without external injection, the polarization of the optical pump controls that of the spin-VCSEL. However, the addition of the externally injected signal polarized with either left- (LCP) or right-circular polarization (RCP) is able to control the polarization of the spin-VCSEL switching it at will to left- or right-circular polarization. A numerical model has been developed showing a very high degree of agreement with the experimental findings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Maneuver analysis

The maneuver design for Viking was accomplished in two phases. First, there was the preflight design and strategy development that was dictated by mission objectives and requirements. Orbit determination and maneuver execution accuracy statistics were used, together with propellant budget considerations, to determine specific maneuver requirements and strategies. The second phase of the maneuver design occurred in flight. The maneuver analyses that were performed in flight, the software that was employed, and the actual inflight results for the entire orbital phase of the nominal Viking Mission are described with emphasis on prelanding objectives and geometry considerations. The actual adaptive design and implementation of the maneuvers as the mission progressed are considered. This design process included the minimization of both propellant usage and the effects of maneuver execution errors, while complying with several mechanization constraints.

Mitchell, R. T.↗

Orbit trim maneuver design and implementation for the 1975 Mars Viking Mission

The Viking Mission included the insertion of two unmanned spacecraft into orbit about Mars and the deployment of a soft-lander from each. A description is presented of the adaptive design and implementation of the spacecraft propulsive maneuvers as these flights progressed, taking into account also the inflight results for the orbital phase of the primary Viking mission. The design process included the selection of target parameters and the minimization of both propellant usage and the effects of execution errors, while complying with mission and operational constraints. All maneuvers performed to trim the spacecraft orbits are considered. Attention is given to navigation requirements, geometry definitions and terminology, maneuver mechanization and constraints, and maneuver capability.

Hintz, G. R.↗

Phobos encounter trajectory and maneuver design

In February 1977, the Viking 1 Orbiter made repeated flybys of the Martian satellite Phobos at distances near 100 kilometers. These close encounters allowed a detailed scientific investigation of the nature and origin of Phobos. A sequence of three maneuvers was required to achieve the encounters. This paper presents the trajectory analysis performed to accommodate the scientific objectives and the spacecraft propulsive maneuver strategy used to achieve the desired trajectory while satisfying operational constraints. The actual maneuvers executed and the resultant Phobos encounter conditions are presented.

Diehl, R. E.↗