Engineering topics

Adeniji-Fashola, A. A.

Publications and source records attributed to Adeniji-Fashola, A. A..

4 records

NASA NTRS1989

Inlet turbulence intensity level and cross-stream distribution effects on the heat transfer in plane wall jets

The effect of the turbulence intensity level and its cross-stream distribution at the inlet on the numerical prediction of the heat transfer in a two-dimensional turbulent-wall jet was investigated. The investigation was carried out within the framework of the standard kappa-epsilon turbulence model. The predicted Nusselt number showed the influence of the turbulence intensity level and its cross-stream distribution at the inlet to be significant but restricted to the first 15 slot widths from the inlet slot. Beyond this location, all the predictions were observed to collapse onto a single curve which exhibited a maximum over-prediction of about 30 percent when compared with the available experimental data.

Adeniji-Fashola, A. A.↗

NASA NTRS1988

Free vibration of rectangular plates with a small initial curvature

The method of matched asymptotic expansions is used to solve the transverse free vibration of a slightly curved, thin rectangular plate. Analytical results for natural frequencies and mode shapes are presented in the limit when the dimensionless bending rigidity, epsilon, is small compared with in-plane forces. Results for different boundary conditions are obtained when the initial deflection is: (1) a polynomial in both directions, and (2) the product of a polynomial and a trigonometric function, and arbitrary. For the arbitrary initial deflection case, the Fourier series technique is used to define the initial deflection. The results obtained show that the natural frequencies of vibration of slightly curved plates are coincident with those of perfectly flat, prestressed rectangular plates. However, the eigenmodes are very different from those of initially flat prestressed rectangular plates. The total deflection is found to be the sum of the initial deflection, the deflection resulting from the solution of the flat plate problem, and the deflection resulting from the static problem.

Adeniji-Fashola, A. A.↗

NASA NTRS1988

Confined turbulent fluid-particle flow modeling using multiple-realization particle trajectory schemes

A multiple-realization particle trajectory scheme has been developed and applied to the numerical prediction of confined turbulent fluid-particle flows. The example flows investigated include the vertical pipe upflow experimental data of Tsuji et al. and the experimental data of Leavitt for a coaxial jet flow, comprising a particle-laden central jet and a clean annular jet, into a large recirculation chamber. The results obtained from the numerical scheme agree well with the experimental data, lending confidence to the modeling approach. The multiple-realization particle trajectory turbulent flow modeling scheme is believed to be a more elegant and accurate approach to the extension of single-particle hydrodynamics to dilute multi-particle systems than the more commonly employed two-fluid modeling approach. It is also better able to incorporate additional force items such as lift, virtual mass and Bassett history terms directly into the particle equation of motion as appropriate. This makes it a suitable candidate for particle migration studies and an extension to situations involving liquid particulate phases with possible propulsion applications, such as in spray combustion, follows naturally.

Adeniji-Fashola, A. A.↗

NASA NTRS1986

The effect of a small initial curvature on the free vibration of clamped, rectangular plates

An analytical method of obtaining the natural frequencies and mode shapes of clamped, rectangular plates having a small initial curvature is presented. Specifically, the singular perturbation technique is used to reduce the fourth-order plate vibration problem to the simpler membrane problem with modified boundary conditions that account for the bending effects. The eigenfrequencies for plates with inverse aspect ratios varying between 0.1 and 1.0 and for the dimensionless normal prestress between 0.1 and 1.0 have been presented for values of epsilon, the normalized bending rigidity, ranging between 0.0010 and 0.2500. It is established that a small initial curvature has no effect on the frequency of vibration of the plate. However, its effect is manifested in the eigenmodes.

Adeniji-Fashola, A. A.↗