Engineering topics
Aftosmis, Michael J.
Publications and source records attributed to Aftosmis, Michael J..
Cartesian Mesh Simulations for the 3rd AIAA Sonic Boom Prediction Workshop
No abstract available
sBOOM Propagation for the Third AIAA Sonic Boom Prediction Workshop
No abstract available
Adjoint-Based Mesh Adaptation and Shape Optimization for Simulations with Propulsion
We demonstrate a well-posed formulation of permeable boundary conditions and mass- flow-rate functionals for adjoint-based mesh refinement and shape optimization governed by the steady Euler equations. The boundary conditions are used to model propulsion- system effects of inlets and nozzles. A two-shock diffuser with an analytic solution is used to verify the implementation. Numerical examples show that the adjoint solution is smooth at the boundary, indicating that the discretization is adjoint consistent when exit pressure is specified at subsonic outflow, and stagnation temperature and pressure at subsonic inflow. The results focus on improving simulation techniques for low-boom aircraft analysis and design. By including mass-flow-rate outputs, we obtain reliable estimates of engine flow rates concurrently with nearfield pressure signatures without increasing simulation cost. We also demonstrate the importance of mass-flow-rate constraints in shape optimization by examining trade-offs between maximizing performance of a shrouded supersonic nozzle and minimizing shocks in its nearfield.
A Ground Footprint Eccentricity Model For Asteroid Airbursts
Uncertainties in early observations of potentially hazardous asteroids result in preliminary impact corridors that can stretch across large portions of the Earth’s surface. At this early stage of detection, the corridor width and potential for damage are typically estimated using techniques from nuclear weapons research. These estimates often employ spherical blast assumptions resulting in a constant width impact corridor. In actuality, however, the ground damage footprint of obliquely entering asteroids is generally roughly elliptical or “butterfly” shaped, with the major axis extending in the cross range direction and the minor axis aligned with ground-track of the meteoroid. Since actual ground footprints for oblique entries may have aspect ratios greater than two or three, the assumption of a circular blast may significantly underestimate the area of the impact swath and the at-risk population. This work develops an engineering model that can be used to quickly estimate the eccentricity of the ground footprint as a function of local impact parameters. This yields vastly improved local estimates of the corridor width and can significantly enhance the accuracy of risk analysis.
Adaptive Deployable Entry Placement Technology (ADEPT) Development for Small Sat Class Venus Missions
The Adaptable, Deployable Entry and Placement Technology (ADEPT) is a novel approach for entry vehicle design. Similar to an umbrella, it is stowed during launch and deployed prior to entry. ADEPT employs a high performance, 3-D woven, carbon fabric to serve as the primary surface of the mechanically deployed system. The successful ADEPT sounding rocket flight test matured the 1-meter Class ADEPT in the areas of deployment and structural integrity, and provided aerodynamic flight characteristics of the ADEPT open-back configuration from Mach 3 to Mach 0.3. Aerocapture uses the aerodynamic drag from a single hyperbolic atmospheric pass to provide the delta-V needed for orbit insertion. Studies suggest that, compared to propulsive orbit insertion, aerocapture could increase delivered payload by 70 percent at Venus. Drag modulation aerocapture, which shows promise of being simpler and more cost-effective than the more-often studied lift modulation methods, uses in-flight transformations of an entry vehicle's drag area to control the amount of deceleration produced during an atmospheric pass. In single-event drag modulation, a drag device is jettisoned after the appropriate deceleration. ADEPT, due to its unique ability to fold and unfold, is being considered for this SmallSat class payload mission applications.
Distributed-Flap Layout Trade Study on a Highly Flexible Common Research Model
No abstract available
Distributed-Flap Layout Trade Study on a Highly Flexible Common Research Model
The results of a layout trade study of a full-span, trailing-edge flap system for the NASACommon Research Model (CRM) are presented. Previously developed analysis and design tools areused to determine the potential performance benefits of several flap layouts on a highlyflexible version of the aircraft wing. The wing is first re-twisted for optimal aerodynamicperformance at the design cruise condition while addressing aeroelastic effects. Several flaplayouts are then installed on the new baseline wing. The deflection of each segment on allflap layouts is then optimized for aerodynamic performance at an overspeed flight conditionto ascertain the effectiveness of each flap system. The results indicate that employing two-segmentflaps greatly improves overspeed performance as compared to using no or justsingle-segment flaps. The study also showed that additional segments offer only incrementalimprovements in performance. The results also show that using only four spanwise flaps canproduce meaningful performance gains. Overall, the trade study results suggest a simpledistributed flap system (four spanwise flaps with two segments each) can reduce the drag ofthe Common Research Model by 13 counts at a Mach number that is 3.5 percent higher than thedesign cruise point.
Numerical Investigation of Multi-Rotor Configurations
The development of a conservative, parallel blade-element rotor model and its implementation into an adaptive Cartesian method is briefly reviewed. The model is first validated and then applied in edgewise forward flight for a variety of configurations. Validation studies comparing torque required for an isolated rotor match XV-15 wind tunnel trends well. Simulations of a simple quadrotor in “×” and “+” configurations are performed, demonstrating how the trailing rotor(s) lose thrust because of unfavorable aerodynamic interactions with the forward rotor(s), while power required remains near constant. A modified “+1” configuration is also examined, where the lateral rotors are brought inboard by 25%. This configuration showed a further 2% performance improvement over the “+” arrangement. The final paper will also include validation of a tandem rotor configuration with wind tunnel data as well as results and analysis of unsteady quadcopter simulations. In addition, a 4th configuration (× will be analyzed.
A Conservative, Scalable, Space-Time Blade Element Rotor Model for Multi-Rotor Vehicles
The development of a parallel blade-element rotor model and its implementation into an adaptive Cartesian method is described. The unsteady version of the rotor model applies a body force to all cells contained in the swept space-time volume at each timestep and special care is taken to maintain axisymmetry on the Cartesian grid. Mesh convergence of rotor thrust and torque is obtained with around 10000 cells in the disk for the steady model. Parallelization is accomplished using OpenMP and the rotor force computation is distributed across all available nodes. Simulations of an isolated XV-15 rotor in hover show good correlation with experimental data and predictions of multi-rotor thrust variation closely match previous high fidelity simulations. The final paper will also include results from the unsteady rotor model and parallel scaling tests.
Formulation and Implementation of Inflow/Outflow Boundary Conditions to Simulate Propulsive Effects
Boundary conditions appropriate for simulating flow entering or exiting the computational domain to mimic propulsion effects have been implemented in an adaptive Cartesian simulation package. A robust iterative algorithm to control mass flow rate through an outflow boundary surface is presented, along with a formulation to explicitly specify mass flow rate through an inflow boundary surface. The boundary conditions have been applied within a mesh adaptation framework based on the method of adjoint-weighted residuals. This allows for proper adaptive mesh refinement when modeling propulsion systems. The new boundary conditions are demonstrated on several notional propulsion systems operating in flow regimes ranging from low subsonic to hypersonic. The examples show that the prescribed boundary state is more properly imposed as the mesh is refined. The mass-flowrate steering algorithm is shown to be an efficient approach in each example. To demonstrate the boundary conditions on a realistic complex aircraft geometry, two of the new boundary conditions are also applied to a modern low-boom supersonic demonstrator design with multiple flow inlets and outlets.
Computational Modeling of Meteor-Generated Ground Pressure Signatures
We present a thorough validation of a computational approach to predict infrasonic signatures of centimeter-sized meteoroids. We assume that the energy deposition along the meteor trail is dominated by atmospheric drag and simulate the steady, inviscid flow of air in thermochemical equilibrium to compute the meteoroid's near-body pressure signature. This signature is then propagated through a stratified and windy atmosphere to the ground using a methodology adapted from aircraft sonic-boom analysis. An assessment of the numerical accuracy of the near field and the far field solver is presented. The results show that when the source of the signature is the cylindrical Mach-cone, the simulations closely match the observations. The prediction of the shock rise-time, the zero-peak amplitude of the waveform, and the duration of the positive pressure phase are consistently within 10% of the measurements. Uncertainty in the shape of the meteoroid results in a poorer prediction of the trailing part of the waveform. Overall, our results independently verify energy deposition estimates deduced from optical observations.
Cart3D Simulations for the Second AIAA Sonic Boom Prediction Workshop
Simulation results are presented for all test cases prescribed in the Second AIAA Sonic Boom Prediction Workshop. For each of the four nearfield test cases, we compute pressure signatures at specified distances and off-track angles, using an inviscid, embedded-boundary Cartesian-mesh flow solver with output-based mesh adaptation. The cases range in complexity from an axisymmetric body to a full low-boom aircraft configuration with a powered nacelle. For efficiency, boom carpets are decomposed into sets of independent meshes and computed in parallel. This also facilitates the use of more effective meshing strategies - each off-track angle is computed on a mesh with good azimuthal alignment, higher aspect ratio cells, and more tailored adaptation. The nearfield signatures generally exhibit good convergence with mesh refinement. We introduce a local error estimation procedure to highlight regions of the signatures most sensitive to mesh refinement. Results are also presented for the two propagation test cases, which investigate the effects of atmospheric profiles on ground noise. Propagation is handled with an augmented Burgers' equation method (NASA's sBOOM), and ground noise metrics are computed with LCASB.
Simulation-Based Height of Burst Map for Asteroid Airburst Damage Prediction
Entry and breakup models predict that airburst in the Earth's atmosphere is likely for asteroids up to approximately 200 meters in diameter. Objects of this size can deposit over 250 megatons of energy into the atmosphere. Fast-running ground damage prediction codes for such events rely heavily upon methods developed from nuclear weapons research to estimate the damage potential for an airburst at altitude. (Collins, 2005; Mathias, 2017; Hills and Goda, 1993). In particular, these tools rely upon the powerful yield scaling laws developed for point-source blasts that are used in conjunction with a Height of Burst (HOB) map to predict ground damage for an airburst of a specific energy at a given altitude. While this approach works extremely well for yields as large as tens of megatons, it becomes less accurate as yields increase to the hundreds of megatons potentially released by larger airburst events. This study revisits the assumptions underlying this approach and shows how atmospheric buoyancy becomes important as yield increases beyond a few megatons. We then use large-scale three-dimensional simulations to construct numerically generated height of burst maps that are appropriate at the higher energy levels associated with the entry of asteroids with diameters of hundreds of meters. These numerically generated HOB maps can then be incorporated into engineering methods for damage prediction, significantly improving their accuracy for asteroids with diameters greater than 80-100 m.
An ODE-Based Wall Model for Turbulent Flow Simulations
Fully automated meshing for Reynolds-Averaged Navier-Stokes Simulations, Mesh generation for complex geometry continues to be the biggest bottleneck in the RANS simulation process; Fully automated Cartesian methods routinely used for inviscid simulations about arbitrarily complex geometry; These methods lack of an obvious & robust way to achieve near wall anisotropy; Goal: Extend these methods for RANS simulation without sacrificing automation, at an affordable cost; Note: Nothing here is limited to Cartesian methods, and much becomes simpler in a body-fitted setting.
An ODE-based Wall Model for Turbulent Flow Simulations
No abstract available
sBOOM Propagation for the Second AIAA Sonic Boom Prediction Workshop
No abstract available
Numerical Simulation of Bolide Entry with Ground Footprint Prediction
As they decelerate through the atmosphere, meteors deposit mass, momentum and energy into the surrounding air at tremendous rates. Trauma from the entry of such bolides produces strong blast waves that can propagate hundreds of kilometers and cause substantial terrestrial damage even when no ground impact occurs. We present a new simulation technique for airburst blast prediction using a fully-conservative, Cartesian mesh, finite-volume solver and investigate the ability of this method to model far- field propagation over hundreds of kilometers. The work develops mathematical models for the deposition of mass, momentum and energy into the atmosphere and presents verification and validation through canonical problems and the comparison of surface overpressures, and blast arrival times with actual results in the literature for known bolides. The discussion also examines the effects of various approximations to the physics of bolide entry that can substantially decrease the computational expense of these simulations. We present parametric studies to quantify the influence of entry-angle, burst-height and other parameters on the ground footprint of the airburst, and these values are related to predictions from analytic and handbook-methods.