Search NASA⌕ Search

Engineering topics

Ahlswede, Erik

Publications and source records attributed to Ahlswede, Erik.

Preparation of Cu{sub 2}ZnSnSe{sub 4} solar cells by low-temperature co-evaporation and following selenization

Cu{sub 2}ZnSnSe{sub 4} (CZTSe) thin films are prepared by a two-step method which involves co-evaporation of Cu, Zn, Sn, and Se on molybdenum-coated soda-lime glass at low substrate temperature and a following selenization. Solar cells with efficiencies of up to 6.5% can be achieved. The influence of the selenium deposition rates during co-evaporation and the nitrogen pressure during selenization on the properties of the CZTSe films are investigated. It is found that these two parameters can significantly affect the morphology and crystallinity of the CZTSe films. The possible reasons for the experimental results are discussed.

36 MATERIALS SCIENCE↗

Reversible order-disorder related band gap changes in Cu{sub 2}ZnSn(S,Se){sub 4} via post-annealing of solar cells measured by electroreflectance

We report on order–disorder related band gap changes in Cu{sub 2}ZnSn(S,Se){sub 4} solar cells which are induced by post-annealing. The band gap changes of the absorber are detected utilizing electroreflectance and analyzed by comparison with predictions of the stochastic Vineyard model. This yields a critical temperature of T{sub C}=195 °C above which the Cu{sub 2}ZnSn(S,Se){sub 4} absorber layer is entirely disordered within the Cu–Zn layers of the kesterite unit cell. The temporal evolution of the band gap during annealing shows that the equilibrium value is reached on a timescale in the order of hours, depending on the annealing temperature. In contrast to other experimental techniques, electroreflectance precisely measures the band gap and is not influenced by defect-mediated radiative recombination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inverted organic solar cells comprising a solution-processed cesium fluoride interlayer

We investigate the influence of solution-processed cesium fluoride (CsF) interlayers on the performance of inverted polymer solar cells comprising a blend of poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl C{sub 61}-butyric acid methyl ester. The thickness of the CsF layer is optimized in terms of current-voltage characteristics by a variation of the solid content in solution. Capacitance-voltage characteristics reveal a shift of the built-in voltage at the cathode interface by about 0.3 V as compared to devices without a CsF layer, giving rise to an increase in open-circuit voltage by the same value. The vertical distribution of Cs{sup +} and F{sup +} ions is studied by secondary ion mass spectroscopy, indicating a strong diffusion of the alkaline fluoride into the organic layer stack.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗