Annulus Monitoring of CO2 Injection Using Wireless Autonomous Distributed Sensor Networks
Explore the source record for details and available documents.
Wright, Andrew Alexander↗
Engineering topics
Ahmadian, Mohsen
Publications and source records attributed to Ahmadian, Mohsen.
CSEM, Bottomhole Pressure, Salinity, and Flow-Rate Data Collected in Sep. 2020 for Proj. DE-FE0031785
This dataset consists of two directories: first directory named as EM for the controlled source electromagnetic (CSEM) survey data that are zipped per day for September 22, 23, 24, 25, and 27, 2020, and second directory named as "Bottomhole Pressure, Salinity, and Flow-Rate" for the simultaneous collection of bottomhole pressure and salinity and pump flow rate during the CSEM surveys.
CSEM↗
CSEM, BHP, Salinity, Flow-Rate, Fiber, and Tilt Data Collected in Jan. 2022 for Proj. DE-FE0031785
This dataset consists of four directories: first directory named as EM for the controlled source electromagnetic (CSEM) survey data that are zipped per day for January 18-21, 22, 23, 24, 25, 26, 27, 28, 29, 30, and 31, 2022; second directory named as "Fiber" for the fiber optic slow-strain and microseismic data that are zipped per well; the third file that contains bottomhole pressure (BHP) and salinity and pump flow rate data during the CSEM surveys; and the fourth file that contained tiltmeter data.
CSEM↗
Pressure Transient Analyses and Poroelastic Modeling of Hydraulic Fracture Dilation for Multiple Injections at the Devine Fracture Pilot Site
Our team has conducted electromagnetic (EM) surveys for the past six years to monitor hydraulic-fracture behavior at the Devine Fracture Pilot Site (DFPS). The sub-horizontal orientation of a shallow hydraulic fracture at the DFPS provides uniform access to the fracture area for interrogation and data collection. Ahmadian et al. (2023) suggested a possible correlation between spatiotemporal changes in the flow rate, bottomhole pressure (BHP), and the observed surface recorded electric field at the DFPS. In this paper, we present the development of poroelastic forward models and pressure transient analyses (PTAs) to support the development of a multiphysics inverse model for these EM surveys. First, we conducted PTAs of the shut-in periods after six injections out of 10 to determine the fracture closure pressure (FCP) or the overburden pressure used in a poroelastic fracture reopening model. Second, we developed a finite-element poroelastic model throughout five injection cycles to include the effect of the cumulative injected volumes due to the previous injections on current fracture dilation in the presence of highly permeable unpropped and propped zones adjacent to the cohesive layer that models fracture reopening. Fracture reopening in this poroelastic model is based on a calibrated traction-separation response using the bottomhole pressure collected in two injection campaigns in 2020 and 2022. We used the outcomes of a previous simulation study of the primary hydraulic-fracturing stimulation to define the dimension of an unpropped fracture zone ahead of the propped fracture area. The PTAs led to FCPs consistent with those obtained using the injection data collected at the DFPS in 2020. Further, these analyses showed that at later injections, the fracture closure occurred at a later time with respect to the shut-in time, inferring the effect of cumulative injected volumes in previous injections. The simulation results show that considering the propped and unpropped fracture zones improves our poroelastic model in predicting the injection-well BHP. The numerical simulation results demonstrate a significant excess pore pressure near the fracture because of the preceding formation loadings by the previous injections. The obtained fracture dilation area and fluid pressure distribution provide a basis to improve the development of a multiphysics inverse model. Furthermore, in an iteratively coupled scheme, this pressure distribution can be introduced into EM models to render a holistic view of the causative mechanisms for the surface signal anomalies.
02 PETROLEUM↗
Real-Time Monitoring of Fracture Dynamics with a Contrast Agent-Assisted Electromagnetic Method
In collaboration with the Advanced Energy Consortium, our team has previously demonstrated that the placement of electrically active proppants (EAPs) in a hydraulic fracture surveyed by electromagnetic (EM) methods can enhance the imaging of the stimulated reservoir volumes during hydraulic fracturing. That work culminated in constructing a well-characterized EAP-filled fracture anomaly at the Devine field pilot site (DFPS). In subsequent laboratory studies, we observed that the electrical conductivity of our EAP correlates with changes in pressure, salinity, and flow. Thus, we postulated that the EAP could be used as an in-situ sensor for the remote monitoring of these changes in previously EAP-filled fractures. This paper presents our latest field data from the DFPS to demonstrate such correlations at an intermediate pilot scale. We conducted surface-based EM surveys during freshwater (200 ppm) and saltwater (2,500 ppm) slug injections while running surfaced-based EM surveys. Simultaneously, we measured the following: 1) bottomhole pressure and salinity in five monitoring wells; 2) injection rate using high-precision data loggers; 3) distributed acoustic sensors in four monitoring wells; and 4) tiltmeter data on the survey area. We demonstrated that injections into an EAP-filled fracture could be successfully coupled with real-time electric field measurements on the surface, leading to remote monitoring of dynamic changes within the EAP-filled fracture. Furthermore, by comparing the electrical field traces with the bottomhole pressure, flow rate, and salinity, we concluded that the observed electric field in our study is influenced by fracture dilation and flow rate. Salinity effect was observed when saltwater was injected. EM simulations solely based on assumptions of fracture conductivity changes during injection did not reproduce all of the measured electric field magnitudes. Preliminary estimates showed that including streaming potential in our geophysical model may be needed to reduce the simulation mismatch. The methods developed and demonstrated during this study will lead to a better understanding of the extent of fracture networks, formation stress states, fluid leakoff and invasion, characterizations of engineered fracture systems, and other applications where monitoring subsurface flow tracking is deemed important.
02 PETROLEUM↗
Fiber Optic Distributed Acoustic Sensing in DFPS East Well
Fiber optic files in *.hdf format, acquired in the Devine Fracture Pilot Site East well, using Fotech interrogator. There was no change in channel spacing or acquisition settings during the project. Channel spacing is 0.68 m.
Electrically active proppant,Electromagnetic,Fiber↗
Geomechanical and Hydrogeological Evaluation of a Shallow Hydraulic Fracture at the Devine Fracture Pilot Site, Medina County, Texas
UT-Austin’s Devine Fracture Pilot Site, 50 miles southwest of San Antonio, Texas, has been targeted for a comprehensive, multidisciplinary development of fracture diagnostic techniques that are cross-validated by ground-truth data acquisition near a recently created, 175-ft-deep, horizontal hydraulic fracture (Ahmadian et al. 2018 Demonstration of proof of concept of electromagnetic geophysical methods for high resolution illumination of induced fracture networks. In Proceedings of the SPE Hydraulic Fracturing Technology Conference and Exhibition, The Woodlands, Texas, USA, 23–25 January 2018. SPE-189858-MS.). To evaluate the fracture diagnostic methods at this site, we conducted injection tests with a predefined volumetric flow-rate profile, resembling a diagnostic fracture injection test on September 2020. Subsequently, we developed hydrogeological and geomechanical models based on flow-rate and bottomhole-pressure measurements. History-matching efforts using a simplified layer-cake hydrogeological model resulted in the field-scale formation permeability of 9.87 × 10 –15 m 2 (10 mD) and Darcy-scale fracture permeability. The analysis of the bottomhole pressure and injection-rate history showed that (1) the newly created horizontal fracture was closed adjacent to the injection well pre-injection and (2) the initial pump-pressure increase at a nominal volumetric injection rate led to near-well fracture reopening, fluid conductivity increase, and abrupt injection-rate increase. To overcome hydrogeological-model limitations of predicting fracture reopening throughout injection, we extended the modeling to a finite-element, poroelastic analysis of horizontal-fracture growth using a cohesive-zone model. Using this fracture-reopening model, we improved the history match of the transient-pressure response during the experiment by adjusting the hydromechanical properties. Furthermore, post-injection pressure transient analyses helped reduce uncertainty in the overburden-stress gradient, and the initial hydraulic-fracturing simulation verified the plausibility of achieving the surveyed propped fracture area.
02 PETROLEUM↗
Downhole Smart Collar Technology for Wireless Real-Time Fluid Monitoring.
Abstract not provided.
Wright, Andrew↗
Accelerating Hydraulic Fracture Imaging by Deep Transfer Learning
Deep transfer learning has a great success story in computer vision (CV), natural language processing, and many other fields. In this communication, we are going to push forward the deep transfer learning to the hydraulic fracture imaging problem by proposing a two-step approach: 1) train a convolutional neural network (CNN) to reconstruct target geometries by a relatively large amount of approximated field patterns generated from a simplified model and 2) fine-tune the top layers of transferred CNN by a small amount of true field patterns generated through a full model. The advantages include the rapid generation of large amount of data through the simplified model and the high reconstruction accuracy through a careful design of the deep transfer learning. Here, the CNN trained through the deep transfer learning can accurately reconstruct the lateral extent and direction of fractures with unseen conductivity and white Gaussian noise, showing a notable acceleration/accuracy enhancement over the previous CNN trained by mixing a small number of true data into the approximated data as data augmentation.
02 PETROLEUM↗
Advanced Downhole Acoustic Sensing for Wellbore Integrity (Final Report)
Borehole cement is used across the range of energy technologies to stabilize casing, to serve as a barrier to behind-casing fluid movement. Cement debonding and other flaws, both at cement interfaces and within the cement itself, can create leakage pathways that can threaten safety to personnel, and wellbore performance, with economic and regulatory consequences. A primary method to assess cement health and wellbore integrity is via acoustic methods. This project was designed with three aims: demonstrate a significant improvement in the interpretation of cement acoustic behavior, both during curing, and in interpreting effects of flaws and evolving interfaces; develop sensor technologies to improve signal-noise ratios and cement acoustic responses; and lastly, provide a borehole demonstration of at least one of these technologies. We have accomplished the first two objectives, and the third, delayed by pandemic health concerns, is proceeding as of this writing via a technology partner with the University of Texas Advanced Energy Consortium.
15 GEOTHERMAL ENERGY↗