Engineering topics
Aikin, Robert M
Publications and source records attributed to Aikin, Robert M.
Proton radiography during alloy melting and solidification experiments
Abstract Not Provided
Macroscopic x-ray fluorescence capability for large-scale elemental mapping
Abstract Not Provided
Dynamic characterization of cast and wrought uranium-niobium metals
Abstract Not Provided
Characterization of a uranium-niobium alloy over a range of temperatures and strain rates
Abstract Not Provided
Development of a macroscopic quantitative x-ray fluorescence capability to study heterogeneities in cast uranium alloys
Abstract Not Provided
The mechanical response of a uranium-niobium alloy: a comparison of cast versus wrought processing
Abstract Not Provided
The mechanical response of a uranium-nobium alloy: a comparison of cast versus wrought processing
A rigorous experimentation and validation program is being undertaken to create constitutive models that elucidate the fundamental mechanisms controlling plasticity in uranium-6 wt.% niobium alloys (U-6Nb). The first, 'wrought', material produced by processing a cast ingot I'ia forging and forming into plate was studied. The second material investigated is a direct cast U-6Nb alloy. The purpose of the investigation is to detennine the principal differences, or more importantly, similarities, between the two materials due to processing. It is well known that parameters like grain size, impurity size and chemistry affect the deformation and failure characteristics of materials. Metallography conducted on these materials revealed that the microstructures are quite different. Characterization techniques like tension, compression, and shear were performed to find the principal differences between the materials as a function of stress state. Dynamic characterization using a split Hopkinson pressure bar in conjunction with Taylor impact testing was conducted to derive and thereafter validate constitutive material models. The Mechanical Threshold Strength Model is shown to accurately capture the constitutive response of these materials and Taylor cylinder tests are used to provide a robust way to verify and validate the constitutive model predictions of deformation by comparing finite element simulations with the experimental results. The primary differences between the materials will be described and predictions about material behavior will be made.