Engineering topics

Aindow, Mark

Publications and source records attributed to Aindow, Mark.

8 records

DOE OSTI2024

Martensitic transformation induced strength-ductility synergy in additively manufactured maraging 250 steel by thermal history engineering

Maraging steels are known for their exceptional strength but suffer from limited work hardening and ductility. Here, in this study, we report an intermittent printing strategy to tailor the microstructure and mechanical properties of maraging 250 steel via tuning the thermal history during wire-arc directed energy deposition. By introducing a dwell time between adjacent layers, the maraging 250 steel is cooled below the martensite start temperature, triggering thermally-driven martensitic transformation during the printing process. Thermal cycling during subsequent layer deposition results in the formation of reverted austenite which shows a refined microstructure and induces elemental segregation between martensite and reverted austenite. The Ni enrichment in the austenite promotes stabilization of the reverted austenite upon cooling to room temperature. The reverted austenite is metastable during deformation, leading to strain-induced martensitic transformation under loading. Specifically, a 3 min interlayer dwell time produces a maraging 250 steel with approximately 8% reverted austenite, resulting in improved work hardening via martensitic transformation induced plasticity during deformation. Meanwhile, the higher cooling rate and refined prior austenite grains lead to substantially refined martensitic grains (by approximately fivefold) together with an increased dislocation density. With 3 min interlayer dwell time, the yield strength of the printed maraging 250 steel increases from 836 MPa to 990 MPa, and the uniform elongation is doubled from 3.2% to 6.5%. This intermittent deposition strategy demonstrates the potential to tune the microstructure of maraging steels for achieving strength-ductility synergy by engineering the thermal history during additive manufacturing.

Additive manufacturing↗

DOE OSTI2024

Tension-compression asymmetry in superelasticity of SrNi 2 P 2 single crystals and the influence of low temperatures

ThCr 2 Si 2 -type intermetallic compounds are known to exhibit superelasticity associated with structural transitions through lattice collapse and expansion. These transitions occur via the formation and breaking of Si-type bonds, respectively, under uniaxial loading along the [0 0 1] direction. Unlike most ThCr 2 Si 2 -type intermetallic compounds, which have either an uncollapsed tetragonal structure or a collapsed tetragonal structure, SrNi 2 P 2 possesses a third type of collapsed structured: a one-third orthorhombic structure, for which one expects the occurrence of unique structural transitions and superelastic behavior. In this study, uniaxial compression and tension tests were conducted on micron-sized SrNi 2 P 2 single crystalline columns at room temperature, 200 K, and 100 K, to investigate the influence of loading direction and temperature on the superelasticity of SrNi 2 P 2 . Experimental data and density functional theory calculations revealed the presence of tension-compression asymmetry in the structural transitions and superelasticity, as well as an asymmetry in their temperature dependence, due to the opposite superelastic process associated with compression (forming P-P bonds) and tension (breaking P-P bonds). Additionally, following thermodynamics, the observations suggest that this asymmetric superelasticity could lead to an opposite elastocaloric effect between compression and tension, which could be beneficial potentially in obtaining large temperature changes compared to conventional superelastic solids that show the same elastocaloric effect regardless of loading direction. Furthermore, these results provide an important fundamental insight into the structural transitions, superelasticity processes, and potential elastocaloric effects in SrNi 2 P 2 .

36 MATERIALS SCIENCE↗

DOE OSTI2023

Effects of rhodium doping on dislocation nucleation in a [001] SrNi 2 P 2 single crystal under spherical nanoindentation

Nanoindentation was performed on SrNi 2 P 2 single crystals and their dilute solid solutions, Sr(Ni 1–x Rh x ) 2 P 2 (x = 0 ~ 0.055), under [001] loading to investigate the effects of elemental doping on Young’s modulus and dislocation nucleation stress. The results show that Young’s modulus and the dislocation nucleation stress decrease as the Rh content increases, and their Rh content dependence also varies with the Rh content. Electron diffraction analysis and the anisotropic lattice distortion calculations revealed that a local structural transition from the orthorhombic superstructure to the tetragonal structure and local compressive residual stresses could be the main reasons for the decrease in Young’s modulus and dislocation nucleation stress, respectively. The overlap of stress–strain fields between Rh atoms and the associated local structural transition contribute to their Rh content dependence. Here, the results also indicate that elemental doping does not necessarily strengthen materials if the incipient plasticity is controlled by dislocation nucleation, unlike conventional solid solution strengthening.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Pseudoelasticity of SrNi2P2 Micropillar via Double Lattice Collapse and Expansion

The maximum recoverable strain of most crystalline solids is less than 1% because plastic deformation or fracture usually occurs at a small strain. In this work, we show that a SrNi 2 P 2 micropillar exhibits pseudoelasticity with a large maximum recoverable strain of ~14% under uniaxial compression via unique reversible structural transformation, double lattice collapse–expansion that is repeatable under cyclic loading. Its high yield strength (~3.8 ± 0.5 GPa) and large maximum recoverable strain bring out the ultrahigh modulus of resilience (~146 ± 19 MJ/m 3 ), a few orders of magnitude higher than that of most engineering materials. The double lattice collapse–expansion mechanism shows stress–strain behaviors similar to that of conventional shape-memory alloys, such as hysteresis and thermo-mechanical actuation, even though the structural changes involved are completely different. Our work suggests that the discovery of a new class of high-performance ThCr 2 Si 2 -structured materials will open new research opportunities in the field of pseudoelasticity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2020

Uniaxial compression of [001]-oriented CaFe 2 As 2 single crystals:the effects of microstructure and temperature on superelasticity Part I: Experimental observations

Micropillar compression experiments on [001]-oriented CaFe 2 As 2 single crystals have recently revealed the existence of superelasticity with a remarkably high elastic limit of over 10%. The collapsed tetragonal phase transition, which is a uni-axial contraction process in which As-As bonds are formed across an intervening Ca-plane, is the main mechanism of superelasticity. Usually, superelasticity and the related structural transitions are affected strongly by both the microstructure and the temperature. As such, in this study, we investigated how the microstructure and temperature affect the superelasticity of [001]-oriented CaFe 2 As 2 micropillars cut from solution-grown single crystals, by performing a combination of in-situ cryogenic micromechanical testing and transmission electron microscopy studies. Our results show that the microstructure of CaFe 2 As 2 is influenced strongly by the crystal growth conditions and by subsequent heat treatment. The presence of Ca and As vacancies and FeAs nanoprecipitates affect the mechanical behavior significantly. In addition, the onset stress for the collapsed tetragonal transition decreases gradually as the temperature decreases. These experimental results are discussed primarily in terms of the formation of As-As bonds, which is the essential feature of this mechanism for superelasticity. Our research outcomes provide a more fundamental understanding of the superelasticity exhibited by CaFe 2 As 2 under uni-axial compression.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Multifunctional transition metal doped titanium dioxide reduced graphene oxide composites as highly efficient adsorbents and photocatalysts

A series of novel, mesoporous transition metal doped titanium dioxide-reduced graphene oxide composites are synthesized where the dopants were Mn, Co, Ni, Mo, and W. An in-situ synthesis method was used which involves a green, economic, hydrothermal process which can be scaled up easily. The composites show high surface areas (165–245 m 2 /g) and monomodal pore size distributions with average pore diameters in the range of 3–5 nm. The homogeneous distributions of the dopants are seen in SEM-EDX mapping data. The indirect band gaps of the composite materials are in the range of 2.20–2.48 eV. The composites show excellent dye adsorption activities where 100% adsorption of Rhodamine B occurs within 5 min when Mo–TiO 2 /rGO composite is used. Furthermore, the adsorbed dye can either be desorbed or photocatalytically degraded and the composite is reusable up to 10 cycles without losing significant activity. Mo–TiO 2 /rGO composite showed excellent adsorption of both cationic and anionic dyes at neutral pH.

36 MATERIALS SCIENCE↗

DOE OSTI2020

New findings and current controversies in the reaction of ruthenium red and ammonium cerium(iv) nitrate: focus on the precipitated compound

Finding the true catalyst has always been a challenging step toward the exploration, understanding, and design of catalytic systems for water-oxidation reaction. Many homogeneous and heterogeneous transition metal complexes have been reported that can undergo a complete transformation to the true catalysts during water-oxidation reaction. Furthermore, the transformation of the previously-explored ruthenium red ([(NH 3 ) 5 RuORu(NH 3 ) 4 ORu(NH 3 ) 5 ]Cl 6 ) catalyst in the presence of ammonium cerium(IV) nitrate is reported. For the first time, it is reported that a heterogeneous nano-sized ruthenium–cerium compound is formed by the electrostatic interaction of [(NH 3 ) 5 RuORu(NH 3 ) 4 ORu(NH 3 ) 5 ], 6+/7+ nitrate ions, and the products of the reduction of ammonium cerium(IV) nitrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Thermally activated structural transformations in manganese oxide nanoparticles under air and argon atmospheres

The properties of manganese oxide nanomaterials are dictated by the structure and morphology of the particular phases they can adopt. The effects of post-synthesis heat treatments on amorphous monodisperse manganese oxide nanoparticles at ≤1300° under lab. air and argon atmospheres were investigated using X-ray diffraction, thermal analysis and electron microscopy techniques. During heat treatments in air, the nanoparticles undergo three transformations, resulting in: crystallization to cubic Mn 2 O 3 at ~500°, followed by the transformation to tetragonal Mn 3 O 4 at ~1010°, and to cubic Mn 3 O 4 at ~1190°. The first two transformations are irreversible, are associated with oxygen loss, and involve reductions. of the Mn ions. The latter transformation is polymorphic and spontaneously reversible, and so, tetragonal Mn 3 O 4 is observed at ambient temperature in samples heat-treated at >1000°. The samples heat treated in argon firstly crystallize to a mixt. of monoclinic Mn 2 O 3 and tetragonal Mn 3 O 4 at ~475°, followed by complete transformation to tetragonal Mn 3 O 4 at ~820°, and then to mostly cubic MnO at ~1145°; here again, the residual tetragonal Mn 3 O 4 undergoes a reversible polymorphic transformation at ~1180°, whereas the other transformations are irreversible. In both atmospheres, the amorphous material exhibits short-range cryptomelane-type order with a mixture of Mn 3+ and Mn 4+ prior to crystallization. Furthermore, these data indicate that most of the stable manganese oxide phases can be obtained from initially amorphous nanoparticles by heat treatment under appropriate conditions.

36 MATERIALS SCIENCE↗