Search NASA⌕ Search

Engineering topics

Ajinjeru, Christine

Publications and source records attributed to Ajinjeru, Christine.

At least 19 records

Rheological behavior of neat and carbon fiber-reinforced poly(ether ketone ketone) for extrusion deposition additive manufacturing

To develop new materials for extrusion additive manufacturing (AM) systems, a fundamental understanding of rheological properties is essential to correlate the effect of processing on material structure and its properties. In this work, the rheological properties of five different grades of neat and carbon fiber (CF)-reinforced poly(ether ketone ketone) are reported. Rheological properties are essential to understand the effect of reinforcing fibers and AM process parameters such as time, temperature, environment, and shear rate on flow behavior during processing. Small-amplitude oscillatory shear tests and steady shear tests indicated neat grades to exhibit less increase in viscosity over time when processed in air than the CF-filled grades. The filled grades showed greater shear thinning and lower sensitivity to temperature. Altogether, this rheological analysis provides a broad framework for determining appropriate processing conditions for extrusion deposition AM of such high-temperature polymer systems.

36 MATERIALS SCIENCE↗

Rheological survey of carbon fiber-reinforced high-temperature thermoplastics for big area additive manufacturing tooling applications

Carbon fiber (CF)-reinforced thermoplastic composites have been widely used in different structural applications due to their superior thermal and mechanical properties. The big area additive manufacturing (BAAM) system, developed at Oak Ridge National Laboratory’s Manufacturing Demonstration Facility, has been used to manufacture several composite components, demonstration vehicles, molds, and dies. These components have been designed and fabricated using various CF-reinforced thermoplastics. In this study, the dynamic rheological and mechanical properties of a material commonly used in additive manufacturing, 20 wt% CF-acrylonitrile butadiene styrene (ABS), as well as three CF-reinforced high-temperature polymers, 25 wt% CF-polyphenylsulfone (PPSU), 35 wt% CF-polyethersulfone (PES), and 40 wt% CF-polyphenylene sulfide (PPS), used to print molds were investigated. The viscoelastic properties, namely storage modulus, loss modulus, tan delta, and complex viscosity, of these composites were studied, and the rheological behavior was related to the BAAM extrusion and bead formation process. The results showed 20 wt% CF-ABS and 40 wt% CF-PPS to display a more dominant elastic component at all frequencies tested while 25 wt% CF-PPSU and 35 wt% CF-PES have a more dominant viscous component. This viscoelastic behavior is then used to inform the deposition and bead formation process during extrusion on the BAAM system.

36 MATERIALS SCIENCE↗

Analysis on Part Distortion and Residual Stress in Big Area Additive Manufacturing with Carbon Fiber-Reinforced Thermoplastic using Dehomogenization Technique

Part distortion and bottom surface warpage often occur in extrusion-based additive manufacturing. The undesirable deformations during the printing process are due to residual stresses caused by material shrinkage. Analysis on residual stress and deformation requires accurate thermo-mechanical material properties. Polymer composites reinforced with short fibers have intrinsic inhomogeneities with nonuniform fiber orientation. Therefore, homogenized macro properties may not accurately represent the progressive damage behavior or distortion. In this study, fiber orientations in Acrylonitrile Butadiene Styrene (ABS) reinforced with 20%wt carbon fiber are calculated using a de-homogenization technique. Thermal expansion coefficients in multiple directions are obtained from Thermo-Mechanical Analysis (TMA) tests. Temperature dependent stiffness is measured, and temperature dependent strength is estimated. Thermal conductivities in multiple directions and thermal capacity are measured. The calibrated thermo-mechanical properties of the composite with de-homogenized technique are used to analyze the residual stress and distortion of a 4 ft-wide wall printed in the Big Area Additive Manufacturing (BAAM) system. For experimental measurement on the wall printing, Infra-Red (IR) camera captures the temperature field, and Linear Variable Differential Transformer (LVDT) is installed to measure the warpage at the bottom surface. The experimental data are compared to the numerical analysis results. The temperature profile and the distortion profile from experiment are close to the simulation results. Damages due to residual stress and distortion are analyzed.

Kim, Pum↗

What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers

This paper presents a practical model for evaluating polymer feedstock materials as candidates for 3D printing across a variety of extrusion-based platforms. In order for a material to be successfully utilized for 3D printing operations, a series of fundamental conditions must be met. First, pressure-driven extrusion must occur through a given diameter nozzle at a specified flow rate. Second, the extruded material must form and sustain the desired shape. Third, the extruded structure must be able to bridge a specified gap and serve as a mechanically sound foundation for successive deposits. Finally, the deposited structure must be dimensionally stable during the transition to the final state (i.e. fully cured at room temperature). This article presents a framework for extrusion-based printing and a simple viscoelastic model for each of these conditions based on the rheological and thermo-physical properties of the candidate material and the processing parameters of the extrusion-based deposition platform. The model is demonstrated to be a useful tool for the evaluation of example test cases including: high temperature thermoplastics (polyphenylsulfone), fiber reinforced thermoplastics (acrylonitrile butadiene styrene), low-viscosity thermosets (epoxy resins), and thermoplastics with a high coefficient of thermal expansion (polypropylene).

36 MATERIALS SCIENCE↗

The influence of dynamic rheological properties on carbon fiber-reinforced polyetherimide for large-scale extrusion-based additive manufacturing

Printing high-performance thermoplastics on large scale extrusion-based additive manufacturing platforms requires stability over a range of processing conditions. Yet, research on the melt dynamics and processing conditions of these thermoplastics in big area additive manufacturing (BAAM) are limited. This report characterizes the dynamic rheological behavior of polyetherimide (PEI), a high-performance thermoplastic, as well as carbon fiber (CF)-reinforced PEI composites as a BAAM feedstock material. The viscoelastic properties, such as the storage and loss moduli and complex viscosity, are investigated in relation to the BAAM extrusion process. The results show that CF-PEI composites behave like a viscous liquid during BAAM extrusion. The addition of CF to PEI enhances the shear thinning effect and significantly increases the complex viscosity (2.5× increase for 20% CF, and 3× for 30% CF). The increased viscosity increases the torque on the extruder, which may be alleviated by increasing the material processing temperature.

36 MATERIALS SCIENCE↗

Geospatial Framework for Estimating Household Electricity Demand for Urban Infrastructure Planning in Select African Countries

Power infrastructure planning in Sub-Saharan Africa requires accurate power demand estimates. However, these estimates are lacking in most countries which compounds the effects of unreliable electricity supply. This study utilizes a methodology that was used to forecast power demand in Uganda and extends it to other African countries of interest; Kenya, Nigeria, and South Africa. The goal of the study is to create spatial power demand maps that can be used for power infrastructure planning. The proposed approach utilizes a global population database at a fine resolution of 1 km2 as the foundational input data. The analysis indicates a deficit of about 22,630 MW (South Africa), 20,213 MW (Nigeria), 4,153 MW (Kenya), and 2,508 MW (Uganda) compared to the current installed capacity to meet the highest power demand scenario.

Kotikot, Susan M.↗

Big Area Additive Manufacturing (BAAM) Materials Development and Reinforcement with Advanced Composites

Additive manufacturing (AM) by extrusion deposition is rapidly developing as an energy efficient process that greatly reduces development time for new products including vehicle structures. Development of reinforced thermoplastic compounds that are specifically tailored to the AM process and possess the properties necessary for engineering structures is currently underway. This project focused on developing a fundamental understanding of printability by performing a number of polymer characterization tests, initial printability screenings, and basic mechanical property determinations for a number of compounds. Structural evaluations of more complex printed articles were also performed in order to build a database of mechanical performance for validation of structural simulations planned for Phase II. Included in the structural tests were components that were reinforced using a number of methods including over-wrapping with dry fabric and resin infusing to form an advanced composite having the shape of the 3D printed structure. The results indicate a number of factors that affect printability of materials, and initial structural analysis shows that the data generated will be useful for model validation.

36 MATERIALS SCIENCE↗

Determination of melt processing conditions for high performance amorphous thermoplastics for large format additive manufacturing

As the application space for large-scale 3D printed components continues to grow, it is necessary to identify appropriate processing conditions for high-performance thermoplastics on large format Additive Manufacturing (LFAM) systems. This study compares the rheological behavior of a high-performance thermoplastic, polyphenylsulfone (PPSU), with that of a commonly used low-temperature polymer, acrylonitrile butadiene styrene (ABS), to identify suitable processing conditions for large format AM systems. The linear viscoelastic properties (complex viscosity, storage modulus, loss modulus, and tan delta) of these materials are evaluated as a function of temperature, angular frequency, and carbon fiber content. Over the range of frequencies of interest to LFAM (10–100 rad/s), ABS behaves more like an elastic solid whereas PPSU behaves more like a viscous liquid. Here, the addition of 20–35% by weight of carbon fiber increased the shear thinning effect of both thermoplastics, showing a potential variation of 2–3 x over the range of expected LFAM extrusion shear rates (10–100 s –1 ).

36 MATERIALS SCIENCE↗

Rheological evaluation of high temperature polymers to identify successful extrusion parameters

With the advancements in additive manufacturing (AM), several high temperature thermoplastics are being explored as potential AM feedstocks. Some of these high-performance thermoplastics include; polyetherimides (PEI), polyphenylsulfones (PPSU/F), poly(ether ketone ketone)s (PEKK) and polyphenylene sulfide (PPS) as well as their reinforced composites. Most of these advanced resins tend to be more expensive than commodity plastics such as acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA), and their processing parameters have not been determined for most AM systems. This paper demonstrates a method for identifying the appropriate processing conditions for extrusion-based AM deposition systems, in which a material is forced through an orifice at a given flow rate. The pressure required to extrude a shear-thinning thermoplastic at a given shear rate is calculated based on viscoelastic properties of the polymer melt and compared against maximum system pressure to predict successful extrusion. An evaluation of several candidate materials is presented on the Big Area Additive Manufacturing extrusion-based platform.

Ajinjeru, Christine↗

A VISCOELASTIC MODEL FOR EVALUATING EXTRUSION-BASED PRINT CONDITIONS

Extrusion-based printing systems have improved significantly over the past several years, allowing for higher throughput, higher temperatures, and larger components. At the same time, advanced materials are being introduced on the market that can provide improved performance over a range of operating conditions. Often these materials incorporate fiber reinforcements, reactive resins, and additives to control reaction kinetics, flow rheology, or thermal stability. This study presents a general framework for evaluating the printability of various candidate materials based on a basic viscoelastic model. The model addresses fundamental requirements for extrusion-based printing, including pressure-driven flow, bead formation, bead functionality, and component-level functionality. The effectiveness of this model for evaluating the impact of compositional variations and identifying appropriate processing conditions has been demonstrated for specific materials on direct write, fused filament fabrication, and large-scale extrusion platforms.

Duty, Chad↗

Rheological Characteristics of Fiber Reinforced Poly(Ether Ketone Ketone) (PEKK) for Melt Extrusion Additive Manufacturing

Several grades of unreinforced and short fiber reinforced poly(ether ketone ketone) (PEKK) copolymers are analyzed for their potential use as feedstock materials in melt extrusion-based additive manufacturing (AM) systems. Rheological characterization has been performed to study the effect of extrusion processing parameters such as time, temperature, environment, and shear rate for the selected materials. The effect of reinforcing filler content on the melt processing conditions of PEKK composites are also reported, and processing conditions for successful extrusion of these materials on AM systems are determined.

Kishore, Vidya↗

The Influence of Rheology on Melt Processing Conditions of Carbon Fiber Reinforced Polyetherimide for Big Area Additive Manufacturing

An approach is presented for determining the melt processing conditions of high temperature amorphous thermoplastics, specifically carbon fiber reinforced polyetherimide (PEI), for Big Area Additive Manufacturing (BAAM). PEI is a high performance thermoplastic that is attractive for various high temperature applications in the automotive and aircraft industry. For PEI to be processed successfully with BAAM, it must be stable over a range of temperatures and print conditions to ensure the final part possesses the desired strength and modulus. Under this approach, thermal properties are first analyzed to identify the lower and upper operating limits for the polymer and then extensive rheological characterization is carried out at selected temperatures within these bounds. This study investigates the effect of temperature, fiber loading, and processing environment on rheology in order to identify suitable process parameters for extruding carbon-fiber reinforced PEI on BAAM.

Ajinjeru, Christine↗

Infrared Preheating to Enhance Interlayer Strength of Components Printed on the Big Area Additive Manufacturing (BAAM) System

The Big Area Additive Manufacturing (BAAM) system has the capacity to print structures on the order of several meters at a rate exceeding 50 kg/h, thereby having the potential to significantly impact the production of components in automotive, aerospace and energy sectors. However, a primary issue that limits the functional use of such parts is mechanical anisotropy. The strength of printed parts across successive layers in the build direction (z-direction) is significantly lower than the corresponding in-plane strength (x-y directions). This is largely due to poor bonding between the printed layers as the lower layers cool below the glass transition temperature (Tg) before the next layer is deposited. This work explores the use of infrared heating to increase the surface temperature of the printed layer just prior to deposition of new material to improve the interlayer strength of the components. The material used in this study was acrylonitrile butadiene styrene (ABS) reinforced with 20% chopped carbon fiber by weight. Significant improvements in z-strength were observed for the parts whose surface temperature was increased from below Tg to close to or above Tg using infrared heating. Parameters such as print speed, nozzle diameter and extrusion temperature were also found to impact the heat input required to enhance interlayer adhesion without significantly degrading the polymer and compromising on surface finish.

Kishore, Vidya↗

High performance poly(etherketoneketone) (PEKK) composite parts fabricated using Big Area Additive Manufacturing (BAAM) processes

ORNL collaborated with Arkema Inc. to investigate poly(etherketoneketone) (PEKK) and its composites as potential feedstock material for Big Area Additive Manufacturing (BAAM) system. In this work thermal and rheological properties were investigated and characterized in order to identify suitable processing conditions and material flow behavior for BAAM process.

36 MATERIALS SCIENCE↗

Additive Manufacturing of High Performance Semicrystalline Thermoplastics and Their Composites

This work investigates the use of two semi-crystalline high performance thermoplastics, polyphenylene sulfide (PPS) and poly (ether ketone ketone) (PEKK), as feedstock for fused filament fabrication process. Composites of PPS and PEKK are emerging as viable candidates for several components in aerospace and tooling industries and additive manufacturing of these materials can be extremely beneficial to lower manufacturing costs and lead times. However, these materials pose several challenges for extrusion and deposition due to some of their inherent properties as well as thermal and oxidative responses. To better understand the properties of such systems specific to 3D printing and determine the critical parameters that make them “printable”, various rheological and thermal properties have been studied for neat as well as short fiber reinforced PPS and PEKK systems. Attempts were also made to print these materials in a customized high temperature fused filament fabrication system.

Kishore, Vidya↗