Search NASA⌕ Search

Engineering topics

Alajo, Ayodeji

Publications and source records attributed to Alajo, Ayodeji.

Gamma Neutron Correlated Noise of the EUCLID Critical Experiment

In this work, we present results from gamma noise measurements of a fast plutonium critical system for the first time. These results are compared to the more traditional method of neutron noise. Additionally, we investigate cross correlations of neutron and gamma signals and discuss the advantages of doing so.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Optimization Algorithm for Criticality Experiment Design Using Whisper

Many criticality experiments performed to aid in nuclear data evaluation are designed to maximize the sensitivity of the system’s effective neutron multiplication factor to a certain nuclide reaction pair over an energy region of interest. This is typically done by evaluating possible designs in a transport code such as MCNP and selecting the one with the highest desired sensitivity. A designer has many tools to try to maximize this sensitivity such as different moderators, reflectors, fuels, and geometries. This balancing act of identifying a critical and maximally sensitive system become very computationally expensive as more variables are added and higher precisions are desired. In order to identify these optimal configurations more efficiently a Particle Swarm Optimization (PSO) algorithm coupled with MCNP has been developed by Los Alamos National Laboratory (LANL). This algorithm has been used to design two upcoming criticality experiments that will be performed at the National Criticality Experiments Research Center (NCERC), located at the Nevada National Security Site, and operated by LANL, the only general-purpose critical experiments laboratory in the United States. PSO uses a population (swarm) of candidate solutions (particles) on a search space of dimensions such as moderator and reflector thicknesses or enrichments and concentrations. These particles move around the search space from generation to generation according to simple rules. Eventually, the swarm converges on the configuration that is both critical and maximally sensitive to a piece of nuclear data. PSO is well suited for criticality experiments as the algorithm is agnostic to the underlying physics, meaning it is effective on many different experimental setups. This algorithm has been modified to maximize the nuclear data similarity coefficient between an application case and an experiment aimed at replicating the application case using WHISPER, a nuclear criticality safety analysis tool. This allows for the efficient design of critical experiments informed by nuclear data sensitives.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

On the Criticality Safety of Transuranic Sodium Fast Reactor Fuel Transport Casks

This work addresses the neutronic performance and criticality safety issues of transport casks for fuel pertaining to low conversion ratio sodium cooled fast reactors, conventionally known as Advanced Burner Reactors. The criticality of a one, three, seven and 19-assembly cask capacity is presented. Both dry “helium” and flooded “water” filled casks are considered. No credit for fuel burnup or fission products was assumed. As many as possible of the conservatisms used in licensing light water reactor universal transport casks were incorporated into this SFR cask criticality design and analysis. It was found that at 7-assemblies or more, adding moderator to the SFR cask increases criticality margin. Also, removal of MAs from the fuel increases criticality margin of dry casks and takes a slight amount of margin away for wet casks. Assuming credit for borated fuel tube liners, this design analysis suggests that as many as 19 assemblies can be loaded in a cask if limited purely by criticality safety. If no credit for boron is assumed, the cask could possibly hold seven assemblies if low conversion ratio fast reactor grade fuel and not breeder reactor grade fuel is assumed. The analysis showed that there is a need for new cask designs for fast reactors spent fuel transportation. There is a potential of modifying existing transportation cask design as the starting point for fast reactor spent fuel transportation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗