Search NASA⌕ Search

Engineering topics

Albert, Sarah A.

Publications and source records attributed to Albert, Sarah A..

Single Channel Infrasound Detection Using Machine Learning

Infrasound, low frequency sound less than 20 Hz, is generated by both natural and anthropogenic sources. Infrasound sensors measure pressure fluctuations only in the vertical plane and are single channel. However, the most robust infrasound signal detection methods rely on stations with multiple sensors (arrays), despite the fact that these are sparse. Automated methods developed for seismic data, such as short-term average to long-term average ratio (STA/LTA), often have a high false alarm rate when applied to infrasound data. Leveraging single channel infrasound stations has the potential to decrease signal detection limits, though this cannot be done without a reliable detection method. Therefore, this report presents initial results using (1) a convolutional neural network (CNN) to detect infrasound signals and (2) unsupervised learning to gain insight into source type.

47 OTHER INSTRUMENTATION↗

Using Deep Learning to Develop a High Resolution Planetary Boundary Layer Model for Infrasound Propagation

Infrasound, with frequencies less than 20 Hz, is generated by both natural and anthropogenic sources. When one of these sources exerts a force on the atmosphere, infrasonic waves are generated. The propagation of these waves largely depends on temperature, wind speed, and wind direction. Previous work has used deep learning to accurately predict atmospheric specifications to altitudes of ~40 km. However, this model breaks down for local distances because it is too low resolution. Here we use a high-resolution meteorological dataset collected in Las Vegas, Nevada, USA to develop a deep learning model that can predict temperature, wind speed, and wind direction. Predictions are compared to ground truth observations to show that the model performs well at predicting temperature and wind direction but struggles with prediction wind speed. Model limitations and improvements are also discussed.

54 ENVIRONMENTAL SCIENCES↗

Multihour Stratospheric Flights with the Heliotrope Solar Hot-Air Balloon

Standard meteorological balloons can deliver small scientific payloads to the stratosphere for a few tens of minutes, but achieving multihour level flight in this region is more difficult. We have developed a solar-powered hot-air balloon named the heliotrope that can maintain a nearly constant altitude in the upper troposphere–lower stratosphere as long as the sun is above the horizon. It can accommodate scientific payloads ranging from hundreds of grams to several kilograms. The balloon can achieve float altitudes exceeding 24 km and fly for days in the Arctic summer, although sunset provides a convenient flight termination mechanism at lower latitudes. Two people can build an envelope in about 3.5 h, and the materials cost about $30. The low cost and simplicity of the heliotrope enables a class of missions that is generally out of reach of institutions lacking specialized balloon expertise. Here, we discuss the design history, construction techniques, trajectory characteristics, and flight prediction of the heliotrope balloon. We conclude with a discussion of the physics of solar hot-air balloon flight.

54 ENVIRONMENTAL SCIENCES↗

Geophysical and Planetary Acoustics Via Balloon Borne Platforms

Balloon-borne infrasound research began again in 2014 with a small payload launched as part of the High Altitude Student Platform (HASP; Bowman and Lees(2015)). A larger payload was deployed through the same program in 2015. These proof of concept experiments demonstrated that balloon-borne microbarometers can capture the ocean microbarom (a pervasive infrasound signal generated by ocean waves) even when nearby ground sensors are not able to resolve them (Bowman and Lees, 2017). The following year saw infrasound sensors as secondary payloads on the 2016 Ultra Long Duration Balloon flight from Wanaka, New Zealand (Bowman and Lees, 2018; Lamb et al., 2018) and the WASP 2016 balloon flight from Ft. Sumner, New Mexico (Young et al., 2018). Another payload was included on the HASP 2016 flight as well. In 2017, the Heliotrope project included a four element microbarometer network drifting at altitudes of 20-24 km on solar hot air balloons (Bowman and Albert, 2018). At the time of this writing the Trans-Atlantic Infrasound Payload (TAIP, operated by Sandia National Laboratories) and the Payload for Infrasound Measurement in the Arctic (PIMA, operated by Jet Propulsion Laboratory) are preparing to fly from Sweden to Canada aboard the PMC-Turbo balloon. The purpose of this experiment is to cross-calibrate several different infrasound sensing systems and test whether wind noise events occur in the stratosphere.

47 OTHER INSTRUMENTATION↗

Solar Hot Air Balloons for Terrestrial and Planetary Atmospheres

The first solar hot air balloon was constructed in the early 1970s (Besset, 2016). Over the following decades the Centre National d'Etudes Spatiales (CNES) developed the Montgolfiere Infrarouge (MIR) balloon, which flew on solar power during the day and infrared radiation from the Earth's surface at night (Fommerau and Rougeron, 2011). The balloons were capable of flying for over 60 days and apparently reached altitudes of 30 km at least once (Malaterre, 1993). Solar balloons were the subject of a Jet Propulsion Laboratory study that performed test flights on Earth (Jones and Wu 1999) and discussed their mission potential for Mars, Jupiter, and Venus (Jones and Heun, 1997). The solar balloons were deployed from the ground and dropped from hot air balloons; some were altitude controlled by means of a remotely-commanded air valve at the top of the envelope. More recently, solar balloons have been employed for infrasound studies in the lower stratosphere (see Table 1). The program began in 2015, when a prototype balloon reached an altitude of 22 kilometers before terminating just prior to float (Bowman et al., 2015). An infrasound sensor was successfully deployed on a solar balloon during the 2016 SISE/USIE experiment, in which an acoustic signal from a ground explosion was captured at a range of 330 km (Anderson et al. 2018; Young et al. 2018). This led to the launch of a 5-balloon infrasound network during the Heliotrope experiment (Bowman and Albert, 2018). The balloons were constructed by the researchers themselves at a materials of less than $50 per envelope.

14 SOLAR ENERGY↗

Acoustic Event Location and Background Noise Characterization on a Free Flying Infrasound Sensor Network in the Stratosphere

We present that a variety of Earth surface and atmospheric sources generate low frequency sound waves that can travel great distances. Despite a rich history of ground-based sensor studies, very few experiments have investigated the prospects of free floating microphone arrays at high altitudes. However, recent initiatives have shown that such networks have very low background noise and may sample an acoustic wave field that is fundamentally different than that at Earth’s surface. The experiments have been limited to at most two stations at altitude, making acoustic event detection and localization difficult. We describe the deployment of four drifting microphone stations at altitudes between 21 and 24 km above sea level. The stations detected one of two regional ground-based chemical explosions as well as the ocean microbarom while traveling almost 500 km across the American Southwest. The explosion signal consisted of multiple arrivals; signal amplitudes did not correlate with sensor elevation or source range. The waveforms and propagation patterns suggest interactions with gravity waves in the 35-45 km altitude. A sparse network method that employed curved wave front corrections was able to determine the backazimuth from the free flying network to the acoustic source. Episodic signals similar to those seen on previous flights in the same region were noted, but their source remains unclear. Lastly, background noise levels were commensurate with those on infrasound stations in the International Monitoring System below 2 seconds.

58 GEOSCIENCES↗