Search NASA⌕ Search

Engineering topics

Alexander, David

Publications and source records attributed to Alexander, David.

At least 37 records · Page 2

Comparing Spatial Distributions of Solar Prominence Mass Derived from Coronal Absorption

In the present work we extend the use of this mass-inference technique to a sample of prominences observed in at least two coronal lines. This approach, in theory, allows a direct calculation of prominence mass and helium abundance and how these properties vary spatially and temporally. Our motivation is two-fold: to obtain a He(exp 0)/H(exp 0) abundance ratio, and to determine how the relative spatial distribution of the two species varies in prominences. The first of these relies on the theoretical expectation that the amount of absorption at each EUV wavelength is well-characterized. However, in this work we show that due to a saturation of the continuum absorption in the 625 A and 368 A lines (which have much higher opacity compared to 195 A-) the uncertainties in obtaining the relative abundances are too high to give meaningful estimates. This is an important finding because of its impact on future studies in this area. The comparison of the spatial distribution of helium and hydrogen presented here augments previous observational work indicating that cross-field diffusion of neutrals is an important mechanism for mass loss. Significantly different loss timescales for neutral He and H (helium drains much more rapidly than hydrogen) can impact prominence structure, and both the present and past studies suggest this mechanism is playing a role in structure and possibly dynamics. Section 2 of this paper contains a description of the observations and Section 3 summarizes the method used to infer mass along with the criteria imposed in choosing prominences appropriate for this study. Section 3 also contains a discussion of the problems due to limitations of the available data and the implications for determining relative abundances. We present our results in Section 4, including plots of radial-like scans of prominence mass in different lines to show the spatial distribution of the different species. The last section contains a discussion summarizing the importance of the qualitative results found in this work. The Appendix provides a detailed derivation of how to obtain prominence mass and helium abundance (A 1) and includes the data for all prominences studied (A2).

Gilbert, Holly↗

IMPLICATIONS OF TEMPORAL DEVELOPMENT OF LOCALIZED ULTRAVIOLET AND HARD X-RAY EMISSION FOR LARGE SOLAR FLARES

Ultraviolet and hard X-ray (HXR) emissions in solar flares provide observational signatures of the interaction of flare-accelerated particles with the chromospheric plasma. Earlier studies have shown clear evidence of temporal and spatial relationships between UV and HXR emission, suggesting a common physical origin. However, more recent spatially resolved case studies suggest significant variations in the spatial distributions of the emission signatures, implying that the large-scale magnetic topology of the flaring region must play a crucial role in the spatial and temporal development of the localized UV and HXR emission. We present here an analysis of spatially resolved HXR emission and localized UV emission sources from 11 M and X class flares with observations from RHESSI and high-cadence 1600 A observations from TRACE. Within each flare we address the overall temporal development of individual UV sources and relate them to associated impulsive bursts within the HXR flare profile. We find, for these large flares, that in the initial impulsive bursts of flare activity, the majority of the temporally correlated emission evolves in a series of localized co-spatial sources along the UV ribbons consistent with previous two-dimensional reconnection pictures. However, observations of impulses late in flares, show significant departures from the traditional co-spatial/co-temporal picture. The new results include extended UV ribbons with no corresponding HXR emission and marked spatial separations between temporally correlated sources of UV and HXR emission. In seven of the multi-burst events, we observe the development of independent sets of UV and HXR sources corresponding to the individual impulses seen in the temporal profile. The observed separations and the spatial development of co-temporal emission in multi-burst events emphasize the importance of a complex and time varying magnetic topology in shaping the observed emission distributions in both wavelengths. In four of the events, we observe late developing UV sources which show no relationship with the HXR emission. In these events, the emission sources show a strong relationship with lower energy, more spatially extended X-ray emission believed to be of thermal origin. This suggests that, in the later phase of these complex flares, emission from thermal processes comes to dominate non-thermal processes in the production of the UV emission.

79 ASTRONOMY AND ASTROPHYSICS↗

MASS COMPOSITION IN PRE-ERUPTION QUIET SUN FILAMENTS

Filament eruptions are extremely important phenomena due to their association with coronal mass ejections and their effects on space weather. Little is known about the filament mass and composition in the eruption process, since most of the related research has concentrated on the evolution and disruption of the magnetic field. Following up on our previous work, we present here an analysis of nineteen quiet Sun filament eruptions observed by Mauna Loa Solar Observatory in Halpha and He I 10830 A that has identified a compositional precursor common to all of these eruptions. There is a combined trend of an apparent increase in the homogenization of the filament mass composition, with concurrent increases in absorption in Halpha and He I and in the level of activity, all starting at least one day prior to eruption. This finding suggests that a prolonged period of mass motions, compositional mixing, and possibly even extensive mass loading is occurring during the build up of these eruptions.

79 ASTRONOMY AND ASTROPHYSICS↗

JWST Near-Infrared Detectors: Latest Test Results

The James Webb Space Telescope, an infrared-optimized space telescope being developed by NASA for launch in 2013, will utilize cutting-edge detector technology in its investigation of fundamental questions in astrophysics. JWST's near infrared spectrograph, NIRSpec utilizes two 2048 x 2048 HdCdTe arrays with Sidecar ASIC readout electronics developed by Teledyne to provide spectral coverage from 0.6 microns to 5 microns. We present recent test and calibration results for the NIRSpec flight arrays as well as data processing routines for noise reduction and cosmic ray rejection.

Smith, Erin C.↗

Using Prominence Mass Inferences in Different Coronal Lines to Obtain the He/H Abundance

In a previous study we developed a new technique for deriving prominence mass by observing how much coronal radiation in the Fe XII (lambda195) spectral Line is absorbed by prominence material. In the present work we apply this method. which allows us to consider the effects of both foreground and background radiation in our calculations, to a sample of prominences absorbing in a coronal line that ionizes both H and He (lambda < 504 Angstroms), and a line that ionizes only H (504 Angstroms < lambda < 911 Angstroms). This approach, first suggested by Mucera et al. (1998). permits the determination of the abundance ratio [He I]/[H I] of neutral helium and hydrogen in the prominence. This ratio should depend on how the prominence is formed, on its current thermodynamic state, and on its dynamical evolution. Thus, it may provide useful insights into the formation and evolution of prominences.

Gilbert, Holly↗

Heart Rhythm Monitoring in the Constellation Lunar and Launch/Landing EVA Suit: Recommendations from an Expert Panel

There are currently several physiological monitoring requirements for EVA in the Human-Systems Interface Requirements (HSIR) document. There are questions as to whether the capability to monitor heart rhythm in the lunar surface space suit is a necessary capability for lunar surface operations. Similarly, there are questions as to whether the capability to monitor heart rhythm during a cabin depressurization scenario in the launch/landing space suit is necessary. This presentation seeks to inform space medicine personnel of recommendations made by an expert panel of cardiovascular medicine specialists regarding in-suit ECG heart rhythm monitoring requirements during lunar surface operations. After a review of demographic information and clinical cases and panel discussion, the panel recommended that ECG monitoring capability as a clinical tool was not essential in the lunar space suit; ECG monitoring was not essential in the launch/landing space suit for contingency scenarios; the current hear rate monitoring capability requirement for both launch/landing and lunar space suits should be maintained; lunar vehicles should be required to have ECG monitoring capability with a minimum of 5-lead ECG for IVA medical assessments; and, exercise stress testing for astronaut selection and retention should be changed from the current 85% maximum heart rate limit to maximal, exhaustive 'symptom-limited' testing to maximize diagnostic utility as a screening tool for evaluating the functional capacity of astronauts and their cardiovascular health.

Scheuring, Richard A.↗

IMPLOSION IN A CORONAL ERUPTION

We present the observations of the contraction of the extreme-ultraviolet coronal loops overlying the flaring region during the preheating as well as the early impulsive phase of a GOES class C8.9 flare. During the relatively long, 6 minutes, preheating phase, hard X-ray (HXR) count rates at lower energies (below 25 keV) as well as soft X-ray fluxes increase gradually and the flare emission is dominated by a thermal looptop source with the temperature of 20-30 MK. After the onset of impulsive HXR bursts, the flare spectrum is composed of a thermal component of 17-20 MK, corresponding to the looptop emission, and a nonthermal component with the spectral index {gamma} = 3.5-4.5, corresponding to a pair of conjugate footpoints. The contraction of the overlying coronal loops is associated with the converging motion of the conjugate footpoints and the downward motion of the looptop source. The expansion of the coronal loops following the contraction is associated with the enhancement in H{alpha} emission in the flaring region, and the heating of an eruptive filament whose northern end is located close to the flaring region. The expansion eventually leads to the eruption of the whole magnetic structure and a fast coronal mass ejection. It is the first time that such a large scale contraction of the coronal loops overlying the flaring region has been documented, which is sustained for about 10 minutes at an average speed of {approx}5 km s{sup -1}. Assuming that explosive chromospheric evaporation plays a significant role in compensating for the reduction of the magnetic pressure in the flaring region, we suggest that a prolonged preheating phase dominated by coronal thermal emission is a necessary condition for the observation of coronal implosion. The dense plasma accumulated in the corona during the preheating phase may effectively suppress explosive chromospheric evaporation, which explains the continuation of the observed implosion up to {approx}7 minutes into the impulsive phase.

79 ASTRONOMY AND ASTROPHYSICS↗

Using Prominence Mass Inferences in Different Coronal Lines to Obtain the He/H Abundance

In a previous study we developed a new technique for deriving prominence mass by observing how much coronal radiation in the Fe XI1 (lambda 195) spectral line is absorbed by prominence material. In the present work we apply this method, which allows us to consider the effects of both foreground and background radiation in our calculations, to a sample of prominences absorbing in a coronal line that ionizes both H and He (h < 504 Angstroms), and a line that ionizes only H (504 Angstroms < lambda < 911 Angstroms). This approach, first suggested by Kucera et al. (1998), permits the determination of the abundance ratio [He I]/[H I] of neutral helium and hydrogen in the prominence. This ratio should depend on how the prominence is formed, on its current thermodynamic state, and on its dynamical evolution. Thus, it may provide useful insights into the formation and evolution of prominences.

Gilbert, Holly↗

James Webb Space Telescope Near-Infrared Spectrograph: Dark Performance of the First Flight Candidate Detector Arrays

The James Webb Space Telescope (JWST) Near Infrared Spectrograph (NIRSpec) incorporates two 5 micron cutoff (lambda(sub co) = 5 micron) 2048x2048 pixel Teledyne HgCdTe HAWAII-2RG sensor chip assemblies. These detector arrays, and the two Teledyne SIDECAR application specific integrated circuits that control them, are operated in space at T approx. 37 K. This article focuses on the measured performance of the first flight-candidate, and near-flight candidate, detector arrays. These are the first flight-packaged detector arrays that meet NIRSpec's challenging 6 e(-) rms total noise requirement.

Rauscher, Bernard J.↗

Detectors for the James Webb Space Telescope Near-Infrared Spectrograph I: Readout Mode, Noise Model, and Calibration Considerations

We describe how the James Webb Space Telescope (JWST) Near-Infrared Spectrograph's (NIRSpec's) detectors will be read out, and present a model of how noise scales with the number of multiple non-destructive reads sampling-up-the-ramp. We believe that this noise model, which is validated using real and simulated test data, is applicable to most astronomical near-infrared instruments. We describe some non-ideal behaviors that have been observed in engineering grade NIRSpec detectors, and demonstrate that they are unlikely to affect NIRSpec sensitivity, operations, or calibration. These include a HAWAII-2RG reset anomaly and random telegraph noise (RTN). Using real test data, we show that the reset anomaly is: (1) very nearly noiseless and (2) can be easily calibrated out. Likewise, we show that RTN affects only a small and fixed population of pixels. It can therefore be tracked using standard pixel operability maps.

Rauscher, Bernard J.↗

Detector Arrays for the James Webb Space Telescope Near-Infrared Spectrograph

The James Webb Space Telescope's (JWST) Near Infrared Spectrograph (NIRSpec) incorporates two 5 micron cutoff (lambda(sub co) = 5 microns) 2048x2048 pixel Teledyne HgCdTe HAWAII-2RG sensor chip assemblies. These detector arrays, and the two Teledyne SIDECAR application specific integrated circuits that control them, are operated in space at T approx. 37 K. In this article, we provide a brief introduction to NIRSpec, its detector subsystem (DS), detector readout in the space radiation environment, and present a snapshot of the developmental status of the NIRSpec DS as integration and testing of the engineering test unit begins.

Rauscher, Bernard J.↗

A Brief History of CME Science

We present here a brief summary of the rich heritage of observational and theoretical research leading to the development of our current understanding of the initiation, structure, and evolution of Coronal Mass Ejections.

Alexander, David↗

Simulated Active Region Emission and Dynamics: A STEREO Perspective

We present detailed three-dimensional simulations of active regions resulting from numerical models of sunspots coupled to coronal excitation and emission. The models incorporate a fully three-dimensional magnetoconvection calculation, described in a poster by Hurlburt and Rucklidge, potential field extrapolations from the sunspot model boundary conditions, steady-state coronal loops powered by the convective motions at the surface, EUV and X-ray instrument response functions, and a full voxel rendering. The result is a simulated dynamical active region in three dimensions which enables us to explore coronal heating and its relationship to the dynamics of the photosphere and convection zone. The 3D rendering of the resulting EUV emission allows us to investigate the expected coronal signatures of the EUVI instruments on board the twin STEREO spacecraft to be launched in 2004. The hybrid model developed here also provides a simulation testbed for the development of future STEREO image reconstruction tools: an integral component in the access to STEREO data by the solar physics community.

Alexander, David↗

3D-Stereoscopic Analysis of Solar Active Region Loops: SoHo/EIT Observations at Temperatures of 1.5-2.5 MK - 2

In this paper we study the three-dimensional (3D) structure of hot (T(sub e) approximately equals 1.5 - 2.5 MK) loops in solar active region NOAA 7986, observed on 1996 August 30 with the Extreme-ultraviolet Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory (SoHO). This complements a first study on cooler (T(sub e) approximately equals 1.0 - 1.5 MK) loops of the same active region, using the same method of Dynamic Stereoscopy to reconstruct the 3D geometry. We reconstruct the 3D-coordinates x(s), y(s), z(s), the density n(sub e)(s), and temperature profile T(sub e)(s) of 35 individual loop segments (as function of the loop coordinate s) using EIT 195 A and 284 A images. The major findings are: (1) All loops are found to be in hydrostatic equilibrium, in the entire temperature regime of T(sub e) = 1.0 - 2.5 MK; (2) The analyzed loops have a height of 2-3 scale heights, and thus only segments extending over about one vertical scale height have sufficient emission measure contrast for detection; (3) The temperature gradient over the lowest scale height is of order dT/ds is approximately 1 - 4 K/km; (4) The radiative loss rate is found to exceed the conductive loss rate by about two orders or magnitude, making thermal conduction negligible to explain the temperature structure of the loops; (5) A steady-state can only be achieved when the heating rate E(sub H) matches the radiative loss rate in hydrostatic equilibrium, requiring a heat deposition length lambda(sub H) of the half density scale height lambda, predicting a scaling law with the loop base pressure, EH varies as p(sub 0 exp 2). This favors coronal heating mechanisms that operate near the loop footpoints; (6) We find a reciprocal correlation between the loop pressure p(sub 0) and loop length L, i.e. p(sub 0) varies as 1/L, implying a scaling law of the steady-state requirement with loop length, i.e. E(sub H ) varies as 1/L(exp 2). The heating rate shows no correlation with the loop-aligned magnetic field component B(sub z) at the footpoints, but is correlated with the azimuthal field B(sub phi) = Bz(RDelta Phi/L) of a twisted loop, and is thus consistent with heating mechanisms based on field-aligned currents.

Aschwanden, Markus J.↗

Constructing the Coronal Magnetic Field by Correlating Parameterized Magnetic Field Lines with Observed Coronal Plasma Structures

A method is presented for constructing the coronal magnetic field from photospheric magnetograms and observed coronal loops. A set of magnetic field lines generated from magnetogram data is parameterized and then deformed by varying the parameterized values. The coronal flux tubes associated with this field are adjusted until the correlation between the field lines and the observed coronal loops is maximized. A mathematical formulation is described which ensures that (1) the normal component of the photospheric field remains unchanged, (2) the field is given in the entire corona over an active region, (3) the field remains divergence-free, and 4electric currents are introduced into the field. It is demonstrated that a parameterization of a potential field, comprising a radial stretching of the field, can provide a match for a simple bipolar active region, AR 7999, which crossed the central meridian on 1996 November 26. The result is a non-force-free magnetic field with the Lorentz force being of the order of 10(exp -5.5) g per s(exp 2) resulting from an electric current density of 0.79 micro A per m(exp 2). Calculations show that the plasma beta becomes larger than unity at a strong non-radial currents requires low height of about 0.25 solar radii supporting the non-force-free conclusion. The presence of such strong non-radial currents requires large transverse pressure gradients fo maintain a magnetostatic atmosphere, required by the relatively persistent nature of the coronal structures observed in AR 7999. This scheme is an important tool in generating a magnetic field solution consistent with the coronal flux tube observations and the observed photospheric magnetic field.

Allen, Gary G.↗

Differential rotation in the solar corona

The soft X-ray telescope (SXT) instrument on board the Yohkoh satellite was designed to observe the solar corona for over three years. It was shown in previous works that different tracers of solar rotation, each sensitive to a different part of the solar atmosphere, yield varying results for the latitude dependence of the rotation rate; the differential rotation measured using photospheric structures is markedly different from that obtained using coronal tracers. The long term observations of the solar corona by the SXT make it ideal for the investigation of coronal differential rotation. The soft X-ray emission of the solar corona is used to trace out the rotation rate at different latitudes. This is done by dividing the solar disk into a number of latitude strips and carrying out a power-spectrum analysis of the total soft X-ray intensity in each strip over a twelve week period of the Yohkoh observations. The results are compared with the differential rotation rates obtained from other coronal tracers.

Weber, Mark↗

High-energy gamma-ray emission from solar flares: Constraining the accelerated proton spectrum

Using a multi-component model to describe the gamma-ray emission, we investigate the flares of December 16, 1988 and March 6, 1989 which exhibited unambiguous evidence of neutral pion decay. The observations are then combined with theoretical calculations of pion production to constrain the accelerated proton spectra. The detection of pi(sup 0) emission alone can indicate much about the energy distribution and spectral variation of the protons accelerated to pion producing energies. Here both the intensity and detailed spectral shape of the Doppler-broadened pi(sup 0) decay feature are used to determine the spectral form of the accelerated proton energy distribution. The Doppler width of this gamma-ray emission provides a unique diagnostic of the spectral shape at high energies, independent of any normalisation. To our knowledge, this is the first time that this diagnostic has been used to constrain the proton spectra. The form of the energetic proton distribution is found to be severely limited by the observed intensity and Doppler width of the pi(sup 0) decay emission, demonstrating effectively the diagnostic capabilities of the pi(sup 0) decay gamma-rays. The spectral index derived from the gamma-ray intensity is found to be much harder than that derived from the Doppler width. To reconcile this apparent discrepancy we investigate the effects of introducing a high-energy cut-off in the accelerated proton distribution. With cut-off energies of around 0.5-0.8 GeV and relatively hard spectra, the observed intensities and broadening can be reproduced with a single energetic proton distribution above the pion production threshold.

Alexander, David↗

Flare gamma ray continuum emission from neutral pion decay

We investigate, in detail, the production of solar flare gamma ray emission above 100 MeV via the interaction of high energy protons with the ambient solar atmosphere. We restrict our considerations to the broadband gamma ray spectrum resulting from the decay of neutral pions produced in p-H reactions. Thick-target calculations are performed to determine the photon fluences. However, proton transport is not considered. Inferences about the form of the proton spectrum at 10-100 MeV have already been drawn from de-excitation gamma ray lines. Our aim is to constrain the proton spectrum at higher energies. Thus, the injected proton spectrum is assumed to have the form of a Bessel Function, characteristics of stochastic energy at higher energies. The detailed shape of the gamma ray spectra around 100 MeV is found to have a strong dependence on the spectral index of the power law and on the turnover energy (from Bessel function to power law). As would be expected, the harder the photon spectrum the wider the 100 MeV feature. The photon spectra are to be compared with observations and used to place limits upon the number of particles accelerated and to constrain acceleration models.

Alexander, David↗