Search NASA⌕ Search

Engineering topics

Alexandra Loubeau

Publications and source records attributed to Alexandra Loubeau.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2026

Introduction to the Special Issue on Advanced Air Mobility Noise: Predictions, Measurements and Perception

This Special Issue focuses on noise associated with Advanced Air Mobility (AAM), an emerging class of predominantly electric distributed-propulsion aircraft designed for urban and regional transportation. As these vehicles move toward certification and deployment, noise has become a central challenge for regulatory approval and public acceptance, particularly due to operations in densely populated areas and at low altitudes. The 24 contributions in this issue address three key aspects of AAM noise: prediction, measurement, and human perception. Prediction studies span a wide range of modeling fidelities, from high-resolution simulations to improved semi-analytical approaches, and examine complex aeroacoustic mechanisms including rotor interactions, turbulence ingestion, and broadband noise generation. Measurement studies, largely at model scale, provide new insights into tonal and broadband noise characteristics across configurations and operating conditions, while supporting model validation. Perception-focused contributions investigate annoyance, sound quality metrics, and auralization, emphasizing the role of context and operational factors in shaping human response. Together, these works highlight the interdisciplinary nature of AAM noise research and the need for integrated approaches to enable quieter vehicle design.

Perception↗
NASA NTRS2023

Estimating the Noise Dose Range of the NASA X-59 Aircraft in Supersonic Cruise Using PCBoom Propagation Simulations

PCBoom propagation simulations of the NASA X-59 low-boom in supersonic cruise were conducted using near-field CFD pressure waveforms as inputs to estimate the noise dose range. Low-booms were propagated through realistic atmospheric profiles from the Climate Forecast System Version 2 across the USA, and loudness statistics of the low-booms are presented. The near-field waveforms correspond to aircraft configurations expected to produce minimum- and maximum-loudness levels on the ground. The simulations show that the practical Perceived Level noise dose range is 72 to 86.7 dB. Dose ranges for other single event and cumulative sonic boom metrics of interest are also provided.

X-59↗
NASA NTRS2023

PCBoom Version 7.3 User's Guide

PCBoom is a suite of sonic boom propagation programs that applies full three-dimensional ray tracing based on geometrical acoustics. It predicts sonic boom ground waveforms (signatures) and footprints from supersonic flight vehicles performing arbitrary maneuvers using a variety of built-in or user supplied near-field vehicle source definitions. It also computes loudness metrics, ground signature locations, and sonic boom propagation times. The nomenclature "PC" in PCBoom denotes that the programs were historically targeted to run on a Personal Computer.

PCBoom↗
NASA NTRS2022

PCBoom Version 7 Technical Reference

PCBoom is a suite of sonic boom propagation programs that applies full three-dimensional ray tracing based on geometrical acoustics. It predicts sonic boom ground waveforms and footprints from supersonic flight vehicles performing arbitrary maneuvers using a variety of built-in or user-supplied nearfield vehicle source definitions. It also computes loudness metrics, ground signature locations, and sonic boom propagation times. The nomenclature "PC" in PCBoom denotes that the programs were historically targeted to run on a personal computer. PCBoom provides a valuable contribution toward sonic boom research as illustrated by the following examples: • PCBoom allows for quick “what if” type predictions for a multitude of sonic boom scenarios, including low boom design iteration work. • The detailed flight planning capabilities allow for flight conditions and waypoints to be provided to pilots to generate booms needed for research. • PCBoom allows for post-flight analysis of as-flown trajectories with measured weather data. • PCBoom has been used in sonic boom damage claim cases to determine claim veracity.

PCBoom↗
NASA NTRS2022

Simulation and Regression Modeling of Nasa'S X-59 Low-Boom Carpets Across America

NASA’s X-59 aircraft is predicted to produce a significantly quieter cruise sonic boom than traditional N-wave-producing aircraft. A propagation simulation study was undertaken to quantify loudness levels, exposure size, and variability of the X-59’s low-boom carpet using realistic atmospheric profiles across the contiguous United States of America (CONUS). Near-field pressure data of the X-59 in supersonic cruise from NASA’s fully unstructured Navier–Stokes three-dimensional (known as FUN3D) computational fluid dynamics code were propagated using NASA’s PCBoom code, which solves an enhanced Burgers equation along acoustic rays. Atmospheric profiles from the National Oceanic and Atmospheric Administration’s Climate Forecast System Version 2 database were used for propagation at 138 locations across the CONUS. Carpets at each location were generated for aircraft headings in the four cardinal directions. Over one million X-59 carpets were generated in total. The effects of the heading, season, geography, and climate zone on boom levels and exposure size are presented. Multiple linear regression models were developed to estimate carpet width and loudness metrics across the CONUS. These results inform regulators and mission planners on expected variations in boom levels and carpet extent from atmospheric variations. Understanding potential carpet variability is important when planning community noise surveys using the X-59.

X-59↗
NASA NTRSDate not supplied

TPSAS-NF1676L-33626-DND

NASA is conducting a series of computational experiments to quantify atmospheric effects on low noise sonic booms. In the current study, simulated cruise nearfield pressure data from NASA?s X-59 Quiet Supersonic Technology aircraft was propagated from the aircraft to the ground at four cardinal headings through five years of realistic atmospheric profiles at 30 locations across the eastern USA. Statistical design of experiments was used to select the locations where primary sonic thump carpet widths (CW) and metric levels at the ground were computed. Atmospheric profiles were taken from the Climate Forecast System Reanalysis database, which contains reanalyzed atmospheric profiles four times daily. Decision tree analyses were performed to determine relative importance of predictors for CW and metric levels. Predictors included were latitude, longitude, date, time of day, season, climate, aircraft heading, and ground elevation. Results of this study indicate the propagation resolution needed to adequately characterize the distributions of CW and ground metric data, i.e., necessary separation distance between propagation locations and total number of atmospheres through which to propagate. This resolution will be used for a follow-on study of simulated X-59 carpets across the entire US mainland.

Will Doebler↗
NASA NTRSDate not supplied

TPSAS-NF1676L-33633-DND

Explore the source record for details and available documents.

Alexandra Loubeau↗
NASA NTRSDate not supplied

TPSAS-NF1676L-32160-DND

Six noise metrics have been identified as candidates for quantifying ground sonic boom levels from overflight of supersonic aircraft. Each of these metrics (PL, ASEL, BSEL, DSEL, ESEL, and ISBAP) has previously been investigated in meta-analyses using laboratory study data corresponding to perception of sonic booms in outdoor and indoor environments. These metrics are now computed and analyzed for a set of recorded outdoor sonic boom signatures under a low degree of atmospheric turbulence. Predictions of the ground signatures are also computed, without inclusion of turbulence effects, and metrics are compared between measurements and predictions. Metrics least sensitive to atmospheric turbulence effects are identified as potentially more robust for quantifying the sonic boom level from a supersonic aircraft.

Alexandra Loubeau↗
NASA NTRSDate not supplied

TPSAS-NF1676L-13674-DND

Sonic Boom Modeling Overview What are we trying to do? Understand the impact of sonic booms from new low-boom aircraft designs on community residents What is our approach? - Atmospheric Propagation: Develop more accurate sonic boom propagation models - Structural Response & Modeling: Examine sonic boom transmission into small and large structures - Human Response & Modeling: Develop psychoacoustic model of human response to low booms (both outdoors and indoors) for single and multiple events - Work cooperatively with regulators (FAA, ICAO) and other researchers (industry, academia, JAXA, others) What are the payoffs if we are successful? - Replace current prohibition of civil supersonic overland flight with a noise-based standard for aircraft certification

Alexandra Loubeau↗
NASA NTRSDate not supplied

TPSAS-NF1676L-30234-DND

Explore the source record for details and available documents.

Alexandra Loubeau↗
NASA NTRSDate not supplied

TPSAS-NF1676L-20030-DND

Sonic booms from recently proposed supersonic aircraft designs developed with advanced tools are predicted to be quieter than those from previous designs. The possibility of developing a low-boom flight demonstration vehicle for conducting community response studies has attracted international interest. These studies would provide data to guide development of a preliminary noise certification standard for commercial supersonic aircraft. An affordable approach to conducting these studies suggests the use of a sub-scale experimental aircraft. Due to the smaller size and weight of the sub-scale vehicle, the resulting sonic boom is expected to contain spectral characteristics that differ from that of a full-scale vehicle. To determine the relevance of using a sub-scale aircraft for community annoyance studies, a laboratory study was conducted to verify that these spectral differences do not significantly affect human response. Indoor annoyance was evaluated for a variety of sonic booms predicted for several different sizes of vehicles. Previously reported results compared indoor annoyance for the different sizes using the metric Perceived Level (PL) at the exterior of the structure. Updated results include analyses with other candidate noise metrics, nonlinear regression, and specific boom duration effects.

Alexandra Loubeau↗
NASA NTRSDate not supplied

TPSAS-NF1676L-28791-DND

Explore the source record for details and available documents.

Alexandra Loubeau↗
NASA NTRSDate not supplied

Final Master's Project Advised by Jiri Tichy on Architectural Acoustics

Jiri Tichy's interest and expertise in architectural acoustics research led to the formulation of a Master’s student project on the irregularity of low-frequency response in small rooms. The numerical study conducted under the guidance of Dr. Tichy by the present author addressed how to decrease the low-frequency sound field variability using a loudspeaker source with constant sound power radiation. A summary of the research results will be presented in terms of standard deviation, as a function of source position, receiver position, and room absorption. In addition, the presentation will include how this research experience instilled in the author a desire to continue pursuing acoustics research.

acoustics↗