Generalizable Organic-to-Aqueous Phase Transfer of a Au 18 Nanocluster with Luminescence Enhancement and Robust Photocatalysis in Water
Not Available
Engineering topics
Publications and source records attributed to Alfonso, Dominic.
Not Available
For presentation at the 70th AVS International Symposium and Exhibition. In this work, we show that the activity of Ag electrocatalysts for electrochemical CO2 to CO conversion is improved when supported on sulfur-doped (S-doped) carbon materials. S-doped carbon support was created by treating the heavily sputtered, highly oriented pyrolytic graphite (HOPG) in H2S at elevated temperatures, as confirmed by the S 2p X-ray photoelectron spectroscopy (XPS) peak. Scanning tunneling microscopy (STM) images indicated that Ag nanoparticles supported on S-doped HOPG had similar size distributions as those supported on sulfur-free (S-free) HOPG. While both catalysts reached > 90% CO Faradaic efficiency (FECO) at E = -1.3 V vs. the reversible hydrogen electrode (RHE) in the CO2 reduction reaction (CO2RR), Ag catalysts supported on S-doped HOPG demonstrated 70% higher CO turnover frequency (TOFCO = 3.4 CO/atomAg/s) than those supported on S-free HOPG (TOFCO = 2.0 CO/atomAg/s). Preliminary calculations based on density functional theory (DFT) indicated a more favorable energetic pathway of CO2-to-CO at the C-S-Ag interface, tentatively consistent with experiments. These results hint at a new approach to design active and selective electrocatalysts for CO2 conversion.
Molecule size correlates with the number of electrons on electronic energies and strength of anharmonicity on vibrational properties, however, it is challenging to address using classical computing. In this study, variational quantum eigensolver (VQE) algorithm was implemented on a quantum simulator to quantify electronic and vibrational energies and reaction pathways of CO2 + NH3 = NH2COOH. The VQE-based Hartree-Fock-Embedding algorithm was adopted to benchmark electronic energies for a series of molecules (doi.org/10.1063/5.0188249) and quantify the reaction energy profile of the CO2 capture reaction (doi.org/10.1116/5.0137750). The generated reaction profile is in good agreement with the classical high-level Coupled-Cluster-Singles-and-Doubles (CCSD) results. The quantum computing algorithm also helps enhance the calculation of vibrational ground-state energies by considering the many-body coupling using the Vibrational Self-Consistent Field method, providing results for CO2 and NH3 molecules with accuracy comparable to the direct diagonalization method. Our approach indicates quantum computing can be applied to solve practical problems.
Quantum Information Science (QIS) is expected to profoundly change the practice of science and engineering in the coming decades. QIS technology exploits quantum phenomena for performing tasks that are impossible to do today and is a rapidly progressing field, fueled by large investments from the private sector and governments. Its importance to the U.S. economy and national security is underscored by the National Quantum Initiative Act (NQIA) passed in December 2018, which creates a coordinated multiagency program to support research and training in QIS. After the NIQA signed into law, NETL has launched an initiative to apply QIS to problems encountered in energy technology development. In Jan. 2020, an Quantum for Energy Systems & Technologies (QUEST) working group was formed to establish a workforce capable of developing, reviewing, managing, and advising on QIS-related technologies for NETL and FECM. Since then, the QUEST team have been working on developing quantum sensing technology and performing quantum computing to solve energy-related problems. This poster summarized the QUEST team’s activities & accomplishments on QIS targeting energy-related applications.
Quantum computing leverages the principles of quantum mechanics in novel ways to tackle complex chemistry problems that cannot be accurately addressed using traditional quantum chemistry methods. However, the high computational cost and available number of physical qubits with high fidelity limit its application to small chemical systems. This work employed a quantum-classical framework which features a quantum active space-embedding approach to perform simulations of chemical reactions that require up to 14 qubits. This framework was applied to prototypical example metal hydrogenation reactions: the coupling between hydrogen and Li 2 , Li 3 , and Li 4 clusters. Particular attention was paid to the computation of barriers and reaction energies. The predicted reaction profiles compare well with advanced classical quantum chemistry methods, demonstrating the potential of the quantum embedding algorithm to map out reaction profiles of realistic gas-phase chemical reactions to ascertain qualitative energetic trends. Additionally, the predicted potential energy curves provide a benchmark to compare against both current and future quantum embedding approaches.
Experiments show that Au25(SR)$\overline{_{18}}$ is a potential electrocatalyst for the electrochemical reduction of CO 2 , but elucidation of the reaction mechanisms remain challenging experimentally. We evaluate key steps in the active site formation, CO 2 reduction, and H 2 evolution on the nanocluster employing density functional theory coupled with an explicit solvent model of the electrochemical interface to calculate activation barriers. The predicted preferred pathway for activating the nanocluster involves dethiolation, resulting in an exposed Au site that is both active and selective for CO 2 reduction. Finally, the alternative S site is found to be kinetically prohibitive and does not facilitate CO 2 reduction.
While quantum computing (QC) is considered as a paradigm shift in our basic understanding of physical computation, effective implementation of QC in energy applications also depends on progress and development in the dimensions of both QC hardware and algorithms. To fully address the status and future challenges of QC applied within the energy sector, in this presentation, we firstly summarize recent advancements on the applications of QC to energy infrastructure and materials, complex energy system processes, advanced manufacturing, and energy system security. Then, we will demonstrate the results of QC performed both on a simulator and a quantum device targeting on energy-related applications.
We combined ultrahigh vacuum (UHV) surface science techniques, electrochemical measurements, and computational modeling to investigate electrocatalytic systems that are crucial components of the carbon management effort, including oxygen evolution reactions (OER) and CO2 reduction reactions (CO2RR). Well-defined Model catalysts were grown on substrates in the UHV chamber and characterized with X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM). Selected model electrocatalysts were then tested in electrochemical cells to establish the structure-property relationships in OER and CO2RR. Our results showed that the edge sites of Fe2O3 grown on Au(111) were the most active toward OER and incorporation of Ni at the edge sites (NiFeOx) further boosted their OER activity. We also resolved the size-dependent electrocatalytic CO2-to-CO conversion of the Ag nanoparticle electrocatalysts with average particle diameter between 2 to 6 nm: smaller diameter (< 3 nm) particles favored H2 evolution reaction (HER) due to a high population of Ag edge sites, whereas larger diameter particles favored CO2RR as the population of Ag(100) surface sites grew. We further discovered that electronic interactions between small diameter Ag particles and highly defective carbon supports could break the size-dependent CO2RR selectivity, resulting in highly selective (CO Faradaic Efficiency > 90%) and active Ag nanoparticle electrocatalysts with sizes < 2 nm diameter.
Quantum information science (QIS) is creating a transformative opportunity to improve processes for energy production, distribution, and consumption. In this presentation, we will show the works that are currently pursued into two major directions, (i) quantum sensing and (ii) quantum computing is undergoing in order to find applications in the areas of carbon captures, critical minerals and gas sensing applications.
In this study, the variational quantum eigensolver (VQE) on a quantum simulator is used in calculating ground state electronic structure properties of the LiH n , n = 1–3, complexes including their singly charged ions. Results calculated using classical electronic structure algorithms are also included. We investigate the use of the unitary coupled cluster with singles and doubles (UCCSD) Ansatz using VQE within Qiskit and compare results to full configuration interaction (FCI) calculations. Computed ground state energies, electron affinities, ionization potentials, and dipole moments are considered. We report the first-of-its-kind simulated quantum computing results of selected LiH n species and use the parity orbital to qubit mapping scheme. We find that VQE/UCCSD results are comparable to classical coupled clusters with singles and doubles for all considered systems with respect to FCI. A VQE calculation cost evaluation is included in which we evaluate performance using both Jordan–Wigner and parity orbital to qubit mapping schemes. We also discuss some of the current limitations of utilizing VQE for the study of chemical systems.
Presentation for American Physical Society (APS) March Meeting.
<span style="font-family: Roboto; font-size: 11pt;">This presentation describes the utilization of the variational quantum eigensolver (VQE) using a unitary coupled cluster with singles and doubles (UCCSD) ansatz to simulate a series of LiH</span><sub style="font-family: Roboto; font-size: 11pt;">n</sub><span style="font-family: Roboto; font-size: 11pt;"> molecules (n=1-3), including their singly charged ions. The performance is considered using a simulator by systematically increasing system size, providing data to compare against future VQE calculations. The predicted energy profiles are in semi-quantitative agreement with highly accurate CCSD/FCI methods.</span>
This poster highlights the use of computational hydrogen electrode approach to explain the improved activity and selectivity of Ag nanoparticle catalysts for CO2 to CO conversion observed in the experiments. The calculations predict a charge transfer from the Ag nanoparticle to a defective carbon surface, stabilizing the *COOH intermediate through reduced antibonding orbital overlap, significantly reducing the *COOH formation energy barrier, and improving CO2-to-CO conversion selectivity compared with Ag nanocluster on defect-free carbon. These results provide new insights into carbon-supported electrocatalysts for CO2RR and introduce a new approach for creating active and selective nanocatalysts.
Quantum information science (QIS) is creating potential transformative opportunities to exploit intricate quantum mechanical phenomena in new ways for obtaining and processing information to advance many areas of science and engineering. Since the National Quantum Initiative Act was signed into law in 2018, developing QIS capability and competency is one of the most urgent tasks of DOE to make sure the US win the quantum race. The QIS contains four pillars: quantum computing, quantum simulations, quantum sensing, and quantum networking. To apply QIS in energy related applications, the key is to develop the capability of quantum computing & simulation tools. In this project, we propose to develop the capability of quantum computing and simulations at NETL to target fossil energy related problems. We will install a simulator (e. g. IBM qiskit) on the NETL supercomputer to simulate the environments of quantum computer. Based on the current available quantum algorithms for quantum chemistry, we will develop quantum computing codes to perform simulation which will focus on fossil energy sector challenges, including CO2 capture & conversion, sensing, and fuel conversion. We then will seek opportunities to run our codes on real quantum computers (such as IBM-Q, google Sycamore, etc.). Through this project, the new capability of quantum computing and simulations will be established at NETL. In addition, the NETL workforce in this area will be trained ready to conduct more complicated tasks in line with NETL missions to enhance the nation’s energy foundation.
Not Available
For presentation at the AVS 69th International Symposium and Exhibition, Portland, OR, November 5-10, 2023.
For presentation at the 244th ECS Meeting, Gothenburg, Sweden, October 8-12, 2023.