Search for light sterile neutrinos with the T2K far detector Super-Kamiokande at a baseline of 295 km
Not Available
Engineering topics
Publications and source records attributed to Ali, A..
Not Available
One of the main aims of Wendelstein 7-X (W7-X), an advanced stellarator, is to investigate the quasi-steady state operation of magnetic confinement devices for nuclear fusion, for which power exhaust is an important issue. A dominant fraction of the energy leaving from the confined plasma region will be removed by 10 so-called island divertor units, which are designed to sustain a maximum heat flux of up to 10 MWm –2 . An essential prerequisite for the safe operation of a steady-state device is automatic detection of hot spots and other abnormal events. Simple temperature limits in infrared (IR) thermographic images will not be enough on their own, because of plasma-generated surface coatings and other effects summarized in the following. To protect divertor elements from overheating, and to monitor power deposition onto the divertor elements, near real-time hotspot detection algorithms for the analysis of carbon plasma facing components (PFCs) were implemented and tested in the GLADIS facility.
Not Available
This year we start assembling the DIRC detector to upgrade the particle identification capabilities in the forward region of the GlueX detector in Hall D at Jefferson Lab. The main components of the GlueX DIRC are the four bar boxes (reused from the decommissioned BaBar DIRC) and two photon cameras, which were designed based on the prototype for the SuperB FDIRC. The delicate bar boxes have already arrived at JLab from SLAC, where they have been stored for the last ten years. They will be attached to the newly built photon cameras and installed in Hall D already for the 2019 spring run. Here, we present the status of the GlueX DIRC project including the ongoing R&D and the plan for the future.
Ferromagnetic metal alloys are today commonly used in spintronic and magnetic data storage devices. These multicompound structures consist of several magnetic sublattices exhibiting both intrinsic and induced magnetic moments. Here, we study the response of the element-specific magnetization dynamics for thin film systems based on purely intrinsic (CoFeB) and partially induced (FePt) magnetic moments using extreme ultraviolet pulses from high-harmonic generation (HHG) as an element-sensitive probe. In FePt, on the one hand, we observe an identical normalized transient magnetization for Fe and Pt throughout both the ultrafast demagnetization and the subsequent remagnetization. On the other hand, Co and Fe show a clear difference in the asymptotic limit of the remagnetization process in CoFeB, which is supported by calculations for the temperature-dependent behavior of the equilibrium magnetization using a dynamic spin model. Furthermore, in this work, we provide a vital step toward a comprehensive understanding of ultrafast light-induced magnetization dynamics in ferromagnetic alloys with sublattices of intrinsic and induced magnetic moments.
Not Available
Explore the source record for details and available documents.
Explore the source record for details and available documents.
In this work, Wendelstein 7-X (W7-X) is the world’s largest superconducting nuclear fusion experiment of the optimized stellarator type. In the first Operation Phase (OP1.1) helium and hydrogen plasmas were studied in limiter configuration. The heating energy was limited to 4 MJ and the main purpose of that campaign was the integral commissioning of the machine and diagnostics, which was achieved very successfully. Already from the beginning a comprehensive set of diagnostics was available to study the plasma. On the path towards high-power, high-performance plasmas, W7-X will be stepwise upgraded from an inertially cooled (OP1.2, limited to 80 MJ) to an actively cooled island divertor (OP2, 10 MW steady-state plasma operation). The machine is prepared for OP1.2 with 10 inertially cooled divertor units, and the experimental campaign has started recently.The paper describes a subset of diagnostics which will be available for OP1.2 to study the plasma edge, divertor and scrape-off layer physics including those already available for OP1.1, plus modifications, upgrades and new systems. In conclusion, the focus of this summary will be on technical and engineering aspects, like feasibility and assembly but also on reliability, thermal loads and shielding against magnetic fields.
The U.S. Department of Energy (DOE) in DOE O 435.1 Chg. 1, Radioactive Waste Management, and DOE M 435.1 Chg 1, Radioactive Waste Management Manual, requires the preparation and maintenance of a composite analysis (CA). The primary purpose of the CA is to provide a reasonable expectation that the primary public dose limit is not likely to be exceeded by multiple source terms that may significantly interact with plumes originating at a low-level waste disposal facility. The CA is used to facilitate planning and land use decisions that help assure disposal facility authorization will not result in long-term compliance problems; or, to determine management alternatives, corrective actions, or assessment needs, if potential problems are identified.
Here, after completing the main construction phase of Wendelstein 7-X (W7-X) and successfully commissioning the device, first plasma operation started at the end of 2015. Integral commissioning of plasma start-up and operation using electron cyclotron resonance heating (ECRH) and an extensive set of plasma diagnostics have been completed, allowing initial physics studies during the first operational campaign. Both in helium and hydrogen, plasma breakdown was easily achieved. Gaining experience with plasma vessel conditioning, discharge lengths could be extended gradually. Eventually, discharges lasted up to 6 s, reaching an injected energy of 4 MJ, which is twice the limit originally agreed for the limiter configuration employed during the first operational campaign. At power levels of 4 MW central electron densities reached 3 × 10 19 m –3 , central electron temperatures reached values of 7 keV and ion temperatures reached just above 2 keV. Important physics studies during this first operational phase include a first assessment of power balance and energy confinement, ECRH power deposition experiments, 2nd harmonic O-mode ECRH using multi-pass absorption, and current drive experiments using electron cyclotron current drive. As in many plasma discharges the electron temperature exceeds the ion temperature significantly, these plasmas are governed by core electron root confinement showing a strong positive electric field in the plasma centre.
In this study, we demonstrate the optimization of the annealing temperature for enhanced thermoelectric properties of ZnO. Thin films of ZnO are grown on a sapphire substrate using the metal organic chemical Vapor Deposition (MOCVD) technique. The grown films are annealed in an oxygen environment at 600–1000°C, with a step of 100°C for one hour. Seebeck measurements at room temperature revealed that the Seebeck coefficient of the sample that was not annealed was 152 μV/K, having a carrier concentration of N{sub D} ~ 1.46 × 10{sup 18} cm{sup –3}. The Seebeck coefficient of the annealed films increased from 212 to 415 μV/K up to 900°C and then decreased at 1000°C. The power factor is calculated and found to have an increasing trend with the annealing temperature. This observation is explained by the theory of Johnson and Lark–Horovitz that thermoelectric properties are enhanced by improving the structure of ZnO thin films. The Hall measurements and PL data strongly justify the proposed argument.
The Cosmology Large Angular Scale Surveyor (CLASS) will measure the polarization of the Cosmic Microwave Background to search for and characterize the polarized signature of inflation. CLASS will operate from the Atacama Desert and observe approx.70% of the sky. A variable-delay polarization modulator provides modulation of the polarization at approx.10Hz to suppress the 1/f noise of the atmosphere and enable the measurement of the large angular scale polarization modes. The measurement of the inflationary signal across angular scales that spans both the recombination and reionization features allows a test of the predicted shape of the polarized angular power spectra in addition to a measurement of the energy scale of inflation. CLASS is an array of telescopes covering frequencies of 38, 93, 148, and 217 GHz. These frequencies straddle the foreground minimum and thus allow the extraction of foregrounds from the primordial signal. Each focal plane contains feedhorn-coupled transition-edge sensors that simultaneously detect two orthogonal linear polarizations. The use of single-crystal silicon as the dielectric for the on-chip transmission lines enables both high efficiency and uniformity in fabrication. Integrated band definition has been implemented that both controls the bandpass of the single-mode transmission on the chip and prevents stray light from coupling to the detectors.
Characterization of the minute cosmic microwave background (CMB) polarization signature requires multi-frequency high-throughput precision instrument systems. We have previously described the detector fabrication of a 40 gigahertz focal plane and now describe the fabrication of a 37-element dual-polarization detector module for measurement of the CMB at 90 gigahertz. The 72-TES (Transition Edge Sensor)-based bolometers in each module are coupled to a niobium-based planar orthomode transducer with integrated band defining filters implemented in microstrip transmission line. A single crystal silicon dielectric substrate serves as microstrip dielectric and as a thermal link between the membrane isolated MoAu TES operating at 150 millikelvins and the heat bath. A short silicon leg between the heat bath and the TES bolometer is designed for ballistic phonon transport and provides improved process control and uniformity of thermal conductance in the presence of phonon scattering on roughened surfaces. Micro-machined structures are used to realize the orthomode transducer backshort, provide out of band signal rejection, and a silicon photonic choke for feedhorn coupling are described. The backshort, choke wafer, and detector wafer are indium bump-bonded to create a single 37-element dual-polarization detector module. Fourteen such hexagonally shaped modules each 80 millimeters in size comprise two focal planes. These, along with the recently delivered 40 gigahertz focal plane, will survey a large fraction of the sky as part of the Johns Hopkins University-led ground-based CLASS (Cosmology Large Angular Scale Surveyor) telescope.
Magnetic reconnection usually occurs in turbulent environments, which may not only provide anomalous resistivity to enhance reconnection rates but also significantly modify the reconnection process through direct nonlinear interaction with magnetic islands. This study presents numerical simulations investigating the effects of an imposed dynamic flow on magnetic reconnection, based on a two-dimensional reduced resistive MHD model. Results show that while the linear stability properties of the resistive tearing mode are moderately affected by the dynamic flow, nonlinear evolution is significantly modified by radial parity, amplitude, and frequency of the dynamic flow. After the slowly evolving nonlinear Rutherford stage, the reconnection process is found to progress in two phases by including the dynamic flow. A Sweet-Parker like current sheet is formed in the first phase. Afterwards, plasmoid instability is triggered in the second phase, where multiple plasmoids are continuously generated and ejected along the current sheet, leading to an impulsive bursty reconnection. The reconnection rate is considerably enhanced in the range of low resistivity as compared to without flow. We found that plasmoid instability onset and evolution are strongly influenced by the frequency and radial parity of the dynamic flows. The scaling of effective reconnection rates with the flow is found to be independent of resistivity.
We show through experiments that a transition from laser wakefield acceleration (LWFA) regime to a plasma wakefield acceleration (PWFA) regime can drive electrons up to energies close to the GeV level. Initially, the acceleration mechanism is dominated by the bubble created by the laser in the nonlinear regime of LWFA, leading to an injection of a large number of electrons. After propagation beyond the depletion length, leading to a depletion of the laser pulse, whose transverse ponderomotive force is not able to sustain the bubble anymore, the high energy dense bunch of electrons propagating inside bubble will drive its own wakefield by a PWFA regime. This wakefield will be able to trap and accelerate a population of electrons up to the GeV level during this second stage. Three dimensional particle-in-cell simulations support this analysis and confirm the scenario.
The nonlinear evolution of the resistive tearing mode exhibits an abrupt growth after an X-point collapse once the magnetic island exceeds a certain critical width Δ′w{sub c} for large instability parameter Δ′, leading to a current sheet formation [N. F. Loureiro et al., Phys. Rev. Lett. 95, 235003 (2005)]. In this work, we investigate the underlying mechanism of the X-point collapse as well as the current sheet formation including the viscosity effects, based on a secondary instability analysis. The secondary instability is excited due to the quasilinear current modification by the zonal current. In particular, it is identified that the current peaking effect is plausibly responsible for the onset of the X-point collapse and the current sheet formation, leading to the explosive growth of reconnected flux. In the presence of finite viscosity, the Δ′w{sub c} scaling with the resistivity gets modified. A transition behavior is revealed at P{sub r}≈1 for the viscosity dependence of Δ′w{sub c} and the linear tearing instability. However, the explosive growth seems to be independent of the viscosity in the magnetic Prandtl number P{sub r}<1 regime, while large viscosity plays a strong dissipation role.