Search NASA⌕ Search

Engineering topics

Alivisatos, A. Paul

Publications and source records attributed to Alivisatos, A. Paul.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Observation of ordered organic capping ligands on semiconducting quantum dots via powder X-ray diffraction

Abstract Powder X-ray diffraction is one of the key techniques used to characterize the inorganic structure of colloidal nanocrystals. The comparatively low scattering factor of nuclei of the organic capping ligands and their propensity to be disordered has led investigators to typically consider them effectively invisible to this technique. In this report, we demonstrate that a commonly observed powder X-ray diffraction peak around $$q=1.4{\AA}^{-1}$$ q = 1.4 Å − 1 observed in many small, colloidal quantum dots can be assigned to well-ordered aliphatic ligands bound to and capping the nanocrystals. This conclusion differs from a variety of explanations ascribed by previous sources, the majority of which propose an excess of organic material. Additionally, we demonstrate that the observed ligand peak is a sensitive probe of ligand shell ordering. Changes as a function of ligand length, geometry, and temperature can all be readily observed by X-ray diffraction and manipulated to achieve desired outcomes for the final colloidal system.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Characterization of Carrier Cooling Bottleneck in Silicon Nanoparticles by Extreme Ultraviolet (XUV) Transient Absorption Spectroscopy

Silicon nanoparticles have the promise to surpass the theoretical efficiency limit of single-junction silicon photovoltaics by the creation of a “phonon bottleneck,” a theorized slowing of the cooling rate of hot optical phonons that in turn reduces the cooling rate of hot carriers in the material. Verifying the presence of a phonon bottleneck in silicon nanoparticles requires simultaneous resolution of electronic and structural changes at short timescales. Here, extreme ultraviolet transient absorption spectroscopy is used to observe the excited-state electronic and lattice dynamics in polycrystalline silicon nanoparticles following 800 nm photoexcitation, which excites carriers with 0.35 ± 0.03 eV excess energy above the Δ 1 conduction band minimum. The nanoparticles have nominal 100 nm diameters with crystalline grain sizes of about ~16 nm. The extracted carrier–phonon and phonon–phonon relaxation times of the nanoparticles are compared to those for a silicon (100) single-crystal thin film at similar carrier densities (2 × 10 19 cm –3 for the nanoparticles and 6 × 10 19 cm –3 for the film). The measured carrier–phonon and phonon–phonon scattering lifetimes for the polycrystalline nanoparticles are 870 ± 40 fs and 17.5 ± 0.3 ps, respectively, versus 195 ± 20 fs and 8.1 ± 0.2 ps, respectively, for the silicon thin film. Furthermore, the reduced scattering rates observed in the nanoparticles are consistent with the phonon bottleneck hypothesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Anomalous nanoparticle surface diffusion in LCTEM is revealed by deep learning-assisted analysis

Significance Liquid cell transmission electron microscopy (LCTEM) is an emerging technique, which enables nanoscale visualization and tracking of single nanoparticles near interfaces with unprecedented spatial resolution. Here, we studied the diffusion of nanoparticles in LCTEM experiments using techniques powered by deep neural networks and statistical tests. We observed two underlying regimes of diffusive behavior which are governed by the interaction of the electron beam, the nanoparticle, the nearby substrate, and the liquid environment. This understanding forms the foundation to use LCTEM for single-nanoparticle tracking for a broad range of nanoparticles, interfaces, and liquids.

Jamali, Vida↗
DOE OSTI2021

Single-Particle Studies Reveal a Nanoscale Mechanism for Elastic, Bright, and Repeatable ZnS:Mn Mechanoluminescence in a Low-Pressure Regime

Mechanoluminescent materials, which emit light in response to elastic deformation, are demanded for use as in situ stress sensors. ZnS doped with Mn is known to exhibit one of the lowest reported thresholds for appearance of mechanoluminescence, with repeatable light emission under contact pressure <10 MPa. Here, the physical basis for such behavior remains as yet unclear. Here, reliable microscopic detection of mechanoluminescence of single ZnS:Mn microparticles, in combination with nanoscale structural characterization, provides evidence that the mechanoluminescent properties of these particles result from interplay between a non-centrosymmetric crystal lattice and its defects, viz., dislocations and stacking faults. Statistical analysis of the distributions of mechanoluminescence energy release trajectories reveals two distinct mechanisms of excitation: one attributable to a piezo-phototronic effect and the other due to dislocation motion. At pressures below 8.1 MPa, both mechanisms contribute to mechanoluminescent output, with a dominant contribution from the piezo-phototronic mechanism. In contrast, above 8.1 MPa, dislocation motion is the primary excitation source. For the piezo-phototronic mechanism, we propose a specific model that accounts for elastic ZnS:Mn mechanoluminescence under very low pressure. The charged interfaces in stacking faults lead to the presence of filled traps, which otherwise would be empty in the absence of the built-in electric field. Upon application of external stress, local enhancement of the piezoelectric field at the stacking faults’ interfaces facilitates release of the trapped carriers and subsequent luminescence. This field enhancement explains how <10 MPa pressure produces thousands of photons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Application of Dislocation Theory to Minimize Defects in Artificial Solids Built with Nanocrystal Building Blocks

Conspectus. Oriented atomic attachment of colloidal inorganic nanocrystals represents a powerful synthetic method for preparing complex inorganic superstructures. Examples include fusion of nanocrystals into dimer and superlattice structures. If the attachment were perfect throughout, then the resulting materials would have single crystal-like alignment of the individual nanocrystals' atomic lattices. While individual colloidal nanocrystals typically are free of many defects, there are a multitude of pathways that can generate defects upon nanocrystal attachment. These attachment generated defects are typically undesirable, and thus developing strategies to favor defect-free attachment or heal defective interfaces are essential. There may also be some cases where attachment-derived defects are desirable. In this Account, we summarize our current understanding of how these defects arise, in order to offer guidance to those who are designing nanocrystal derived solids. The small size of inorganic nanocrystals means short diffusion lengths to the surface, which favor the formation of nanocrystal building blocks with pristine atomic structures. Upon attachment, however, there are numerous pathways that can lead to atomic scale defects, and bulk crystal dislocation theory provides an invaluable guide to understanding these phenomena. As an example, an atomic step edge can be incorporated into the interface leading to an extra half-plane of atoms, known as an edge dislocation. These dislocations can be well described by the Burgers vector description of dislocations, which geometrically identifies planes in which a dislocation can move. Our in situ measurements have verified that bulk dislocation theory predictions for 1D defects hold true at few-nanometer length scales in PbTe and CdSe nanocrystal interfaces. Ultimately, the applicability of dislocation theory to nanocrystal attachment enables the predictive design of attachment to prevent or facilitate healing of defects upon nanocrystal attachment. We applied similar logic to understand formation of planar (2D) defects such as stacking faults upon nanocrystal attachment. Again concepts from bulk crystal defect crystallography can identify attachment pathways that can prevent or deterministically form planar defects upon nanocrystal attachment. The concepts we discuss work well for identifying favorable attachment geometries for nanocrystal pairs ; however it is currently unclear how to translate these ideas to near-simultaneous multiparticle attachment. Geometric frustration, which prevents nanocrystal rotation, and yet-to-be considered defect generation pathways unique to multiparticle attachment complicate defect-free superlattice attachment. New imaging methods now allow for the direct observation of local attachment trajectories and may enable improved understanding of such multiparticle phenomena. With further refinement, a unified framework for understanding and ultimately eliminating structural defects in fused nanocrystal superstructures may well be achievable in coming years.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Outdoor performance of a tandem InGaP/Si photovoltaic luminescent solar concentrator

Here, we report the design, fabrication and outdoor characterization of a tandem luminescent solar concentrator/Si multi-junction photovoltaic module. Our tandem LSC/Si device consists of an InGaP LSC functioning as a top cell and a passivated contact Si bottom cell. The LSC comprises of an InGaP microcell array coupled to a polymer waveguide, loaded with CdSe/CdS core-shell quantum dot luminophores. The light trapping efficiency of the LSC waveguide is enhanced by encapsulation with photoluminescence trapping mirrors consisting of dielectric multilayer thin films. We demonstrate the performance of the LSC/Si device through a series of outdoor tests under various irradiance conditions conducted at the National Renewable Energy Laboratory. We report the first outdoor testing data of an LSC/Si tandem module, displaying maintained performance across varied diffusivity conditions for the LSC component. Finally, we model the tandem module performance using a ray optic simulation-based multiphysics model and forecast a pathway for high efficiency tandem LSC/Si module performance.

14 SOLAR ENERGY↗
DOE OSTI2020

Colloidal Synthesis Path to 2D Crystalline Quantum Dot Superlattices

By combining colloidal nanocrystal synthesis, self-assembly, and solution phase epitaxial growth techniques, we developed a general method for preparing single dot thick atomically attached quantum dot (QD) superlattices with high-quality translational and crystallographic orientational order along with state-of-the-art uniformity in the attachment thickness. The procedure begins with colloidal synthesis of hexagonal prism shaped core/shell QDs (e.g., CdSe/CdS), followed by liquid subphase self-assembly and immobilization of superlattices on a substrate. Solution phase epitaxial growth of additional semiconductor material fills in the voids between the particles, resulting in a QD-in-matrix structure. The photoluminescence emission spectra of the QD-in-matrix structure retains characteristic 0D electronic confinement. Importantly, annealing of the resulting structures removes inhomogeneities in the QD–QD inorganic bridges, which our atomistic electronic structure calculations demonstrate would otherwise lead to Anderson-type localization. The piecewise nature of this procedure allows one to independently tune the size and material of the QD core, shell, QD–QD distance, and the matrix material. These four choices can be tuned to control many properties (degree of quantum confinement, quantum coupling, band alignments, etc.) depending on the specific applications. Lastly, cation exchange reactions can be performed on the final QD-in-matrix, as demonstrated herein with a CdSe/CdS to HgSe/HgS conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Uncovering the Role of Hole Traps in Promoting Hole Transfer from Multiexcitonic Quantum Dots to Molecular Acceptors

The understanding of electronic dynamics in multiexcitonic quantum dots (QDs) is important for designing efficient systems useful in high power scenarios, such as solar concentrators and multielectron charge transfer. The multiple charge carriers within a QD can undergo undesired Auger recombination events, which rapidly annihilate carriers on picosecond time scales and generate heat from absorbed photons instead of useful work. Compared to the transfer of multiple electrons, the transfer of multiple holes has proven to be more difficult due to slower hole transfer rates. To probe the competition between Auger recombination and hole transfer in CdSe, CdS, and CdSe/CdS QDs of varying sizes, we synthesized a phenothiazine derivative with optimized functionalities for binding to QDs as a hole accepting ligand and for spectroscopic observation of hole transfer. Transient absorption spectroscopy was used to monitor the photoinduced absorption features from both trapped holes and oxidized ligands under excitation fluences where the averaged initial number of excitons in a QD ranged from ~1 to 19. We observed fluence-dependent hole transfer kinetics that last around 100 ps longer than the predicted Auger recombination lifetimes, and the transfer of up to 3 holes per QD. Theoretical modeling of the kinetics suggests that binding of hole acceptors introduces trapping states significantly different from those in native QDs passivated with oleate ligands. Holes in these modified trap states have prolonged lifetimes, which promotes the hole transfer efficiency. These results highlight the beneficial role of hole-trapping states in devising hole transfer pathways in QD-based systems under multiexcitonic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nucleation, growth, and superlattice formation of nanocrystals observed in liquid cell transmission electron microscopy

This work reviews the advancements and prospects of liquid cell transmission electron microscopy (TEM) imaging and analysis methods in understanding the nucleation, growth, etching, and assembly dynamics of nanocrystals. The bonding of atoms into nanoscale crystallites produces materials with nonadditive properties unique to their size and geometry. The recent application of in situ liquid cell TEM to nanocrystal development has initiated a paradigm shift, (1) from trial-and-error synthesis to a mechanistic understanding of the “synthetic reactions” responsible for the emergence of crystallites from a disordered soup of reactive species (e.g., ions, atoms, molecules) and shape-defined growth or etching; and (2) from post-processing characterization of the nanocrystals’ superlattice assemblies to in situ imaging and mapping of the fundamental interactions and energy landscape governing their collective phase behaviors. Imaging nanocrystal formation and assembly processes on the single-particle level in solution immediately impacts many existing fields, including materials science, nanochemistry, colloidal science, biology, environmental science, electrochemistry, mineralization, soft condensed-matter physics, and device fabrication.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Precise Colloidal Plasmonic Photocatalysts Constructed by Multistep Photodepositions

Natural photosynthesis relies on a sophisticated charge transfer pathway among multiple components with precise spatial, energetic, and temporal organizations in the aqueous environment. It continues to inspire and challenge the design and fabrication of artificial multicomponent colloidal nanostructures for solar-to-fuel conversion. Herein, we introduce a plasmonic photocatalyst synthesized with colloidal methods with five integrated components including cocatalysts installed in orthogonal locations. The precise deposition of individual inorganic components on an Au/TiO 2 nanodumbell nanostructure is enabled by photoreduction and photo-oxidation, which selectively occurs at the TiO 2 tip sites and Au lateral sites, respectively. Under visible-light irradiation, the photocatalyst exhibited activity of oxygen evolution from water without scavengers. Here, we demonstrate that each component is essential for improving the photocatalytic performance. In addition, mechanistic studies suggest that the photocatalytic reaction requires combining the hot charge carriers derived from exciting both the d-sp interband transition and the localized surface plasmon resonance of Au.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Bright Infrared‐to‐Ultraviolet/Visible Upconversion in Small Alkaline Earth‐Based Nanoparticles with Biocompatible CaF 2 Shells

Abstract Upconverting nanoparticles (UCNPs) are promising candidates for photon‐driven reactions, including light‐triggered drug delivery, photodynamic therapy, and photocatalysis. Herein, we investigate the NIR‐to‐UV/visible emission of sub‐15 nm alkaline‐earth rare‐earth fluoride UCNPs (M 1− x Ln x F 2+ x , MLnF) with a CaF 2 shell. We synthesize 8 alkaline‐earth host materials doped with Yb 3+ and Tm 3+ , with alkaline‐earth (M) spanning Ca, Sr, and Ba, MgSr, CaSr, CaBa, SrBa, and CaSrBa. We explore UCNP composition, size, and lanthanide doping‐dependent emission, focusing on upconversion quantum yield (UCQY) and UV emission. UCQY values of 2.46 % at 250 W cm −2 are achieved with 14.5 nm SrLuF@CaF 2 particles, with 7.3 % of total emission in the UV. In 10.9 nm SrYbF:1 %Tm 3+ @CaF 2 particles, UV emission increased to 9.9 % with UCQY at 1.14 %. We demonstrate dye degradation under NIR illumination using SrYbF:1 %Tm 3+ @CaF 2 , highlighting the efficiency of these UCNPs and their ability to trigger photoprocesses.

Fischer, Stefan↗
DOE OSTI2020

Bright Infrared‐to‐Ultraviolet/Visible Upconversion in Small Alkaline Earth‐Based Nanoparticles with Biocompatible CaF 2 Shells

Abstract Upconverting nanoparticles (UCNPs) are promising candidates for photon‐driven reactions, including light‐triggered drug delivery, photodynamic therapy, and photocatalysis. Herein, we investigate the NIR‐to‐UV/visible emission of sub‐15 nm alkaline‐earth rare‐earth fluoride UCNPs (M 1− x Ln x F 2+ x , MLnF) with a CaF 2 shell. We synthesize 8 alkaline‐earth host materials doped with Yb 3+ and Tm 3+ , with alkaline‐earth (M) spanning Ca, Sr, and Ba, MgSr, CaSr, CaBa, SrBa, and CaSrBa. We explore UCNP composition, size, and lanthanide doping‐dependent emission, focusing on upconversion quantum yield (UCQY) and UV emission. UCQY values of 2.46 % at 250 W cm −2 are achieved with 14.5 nm SrLuF@CaF 2 particles, with 7.3 % of total emission in the UV. In 10.9 nm SrYbF:1 %Tm 3+ @CaF 2 particles, UV emission increased to 9.9 % with UCQY at 1.14 %. We demonstrate dye degradation under NIR illumination using SrYbF:1 %Tm 3+ @CaF 2 , highlighting the efficiency of these UCNPs and their ability to trigger photoprocesses.

Fischer, Stefan↗
DOE OSTI2020

Real-time observation of dynamic structure of liquid-vapor interface at nanometer resolution in electron irradiated sodium chloride crystals

The dynamics and structure of the liquid and vapor interface has remained elusive for decades due to the lack of an effective tool for directly visualization beyond micrometer resolution. Here, we designed a simple liquid-cell for encapsulating the liquid state of sodium for transmission electron microscopic (TEM) observation. The real-time dynamic structure of the liquid-vapor interface was imaged and videoed by TEM on the sample of electron irradiated sodium chloride (NaCl) crystals, a well-studied sample with low melting temperature and quantum super-shells of clusters. The nanometer resolution images exhibit the fine structures of the capillary waves, composed of first-time observed three zones of structures and features, i.e. flexible nanoscale fibers, nanoparticles/clusters, and a low-pressure area that sucks the nanoparticles from the liquid to the interface. Although the phenomenons were observed based on irradiated NaCl crystals, the similarities of the phenomenons to predictions suggest our real-time ovserved dynamic structure might be useful in validating long-debated theoretical models of the liquid-vapor interface, and enhancing our knowledge in understanding the non-equilibrium thermodynamics of the liquid-vapor interface to benefit future engineering designs in microfluidics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Perovskite-Carbon Nanotube Light-Emitting Fibers

Active fibers with electro-optic functionalities are promising building blocks for the emerging and rapidly growing field of fiber and textile electronics. Yet, there remains significant challenges that require improved understanding of the principles of active fiber assembly to enable the development of fiber-shaped devices characterized by having a small diameter, being lightweight, and having high mechanical strength. To this end, the current frameworks are insufficient, and new designs and fabrication approaches are essential to accommodate this unconventional form factor. Here, we present a first demonstration of a pathway that effectively integrates the foundational components meeting such requirements, with the use of a flexible and robust conductive core carbon nanotube fiber and an organic–inorganic emissive composite layer as the two critical elements. We introduce an active fiber design that can be realized through an all solution-processed approach. In conclusion, we have implemented this technique to demonstrate a three- layered light-emitting fiber with a coaxially coated design.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Scaling Laws of Exciton Recombination Kinetics in Low Dimensional Halide Perovskite Nanostructures

Carrier recombination is a crucial process governing the optical properties of a semiconductor. Although various theoretical approaches have been utilized to describe carrier behaviors, a quantitative understanding of the impact of defects and interfaces in low dimensional semiconductor systems is still elusive. Here, we develop a model system consisting of chemically tunable, highly luminescent halide perovskite nanocrystals to illustrate the role of carrier diffusion and material dimensionality on the carrier recombination kinetics and luminescence efficiency. Our advanced synthetic methods provide a well-controlled colloidal system consisting of nanocrystals with different aspect ratios, halide compositions, and surface conditions. Using this system, we reveal the scaling laws of photoluminescence quantum yield and radiative lifetime with respect to the aspect ratio of nanocrystals. The scaling laws derived herein are not only a phenomenological observation but proved a powerful tool disentangling the carrier dynamics of microscopic systems in a quantitative and interpretable manner. The investigation of our model system and theoretical formulation bring to light the dimensionality, as a hidden constraint on carrier dynamics, and identify the diffusion length as an important parameter that distinguishes nanoscale and macroscale carrier behaviors. Furthermore, the conceptual distinction in carrier dynamics in different dimensionality regimes informs new design rules for optical devices where complex microstructures are involved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Critical differences in 3D atomic structure of individual ligand-protected nanocrystals in solution

Precise three-dimensional (3D) atomic structure determination of individual nanocrystals is a prerequisite for understanding and predicting their physical properties. Nanocrystals from the same synthesis batch display what are often presumed to be small but possibly important differences in size, lattice distortions, and defects, which can only be understood by structural characterization with high spatial 3D resolution. We solved the structures of individual colloidal platinum nanocrystals by developing atomic-resolution 3D liquid-cell electron microscopy to reveal critical intrinsic heterogeneity of ligand-protected platinum nanocrystals in solution, including structural degeneracies, lattice parameter deviations, internal defects, and strain. These differences in structure lead to substantial contributions to free energies, consequential enough that they must be considered in any discussion of fundamental nanocrystal properties or applications.

Kim, Byung Hyo↗