Engineering topics
Publications and source records attributed to Aljabri, A. S..
Future JPL missions will continue to be scientifically and technically more ambitious, and will demand more autonomy to accomplish complex tasks in uncertain environments and in close proximity to extraterrestrial surfaces. A prime example is small body rendezvous and sample return.
One-ninth scale wind tunnel model tests of the Propfan Test Assessment (PTA) aircraft were performed in three different NASA facilities. Wing and propfan nacelle static pressures, model forces and moments, and flow field at the propfan plane were measured in these tests. Tests started in June 1985 and were completed in January 1987. These data were needed to assure PTA safety of flight, predict PTA performance, and validate analytical codes that will be used to predict flow fields in which the propfan will operate.
Propfans, advanced highly-loaded propellers, are proposed to power transport aircraft that cruise at high subsonic speeds, giving significant fuel savings over the equivalent turbofan-powered aircraft. NASA is currently sponsoring the Propfan Test Assessment Program (PTA) to provide basic data on the structural integrity and acoustic performance of the propfan. The program involves installation design, wind-tunnel tests, and flight tests of the Hamilton Standard SR-7 propfan in a wing-mount tractor installation on the Gulfstream II aircraft. This paper reports on the high-speed wind-tunnel tests and presents the computational aerodynamic methods that were employed in the analyses, design, and evaluation of the configuration. In spite of the complexity of the configuration, these methods provide aerodynamic predictions which are in excellent agreement with wind-tunnel data.
Advanced highly-loaded propellers are proposed to power transport aircraft that cruise at high subsonic speeds giving significant fuel savings over the equivalent turbofan engine. In order to realize these savings, the propeller must be installed so that the aerodynamics of the propeller/nacelle combination do not lead to excessive cyclic blade stresses or installation losses. The on-going, NASA sponsored, Propfan Test Assessment Program (PTA) has provided the first high-speed wind-tunnel data on an installed propfan complete with an inlet. This paper presents computational techniques that allow: (1) optimization of inlet plane location, (2) contouring of lip and cowl, and (3) estimation of propeller cyclic loads due to a nonuniform flowfield. These computational methods, in spite of the complexity of the configuration and the slipstream effects, provide predictions of aerodynamic performance which are in excellent agreement with wind-tunnel data.
A case study is presented of the design of efficient propfan transport aircraft configurations, employing standard subsonic and transonic computed codes that have been modified to account for slipstream effects. After numerically simulating the aerodynamics of the interaction of the wing/nacelle configuration with the swirling slipstream, interference effects are assessed and design procedures are provided which may reduce adverse interference phenomena. These procedures are demonstrated for the case of the design of a Mach 0.8-cruise turboprop aircraft.
Analytical and experimental studies have been undertaken on propellers operating in the unsteady flow field produced by interaction effects due to the fuselage, wing, and nacelles. Methods have been developed and verified experimentally for determining the velocity field in which a propeller operates as well as its aerodynamic and dynamic response to this unsteady environment. Methods are presented for predicting the net thrust of a propeller-wing-body combination as well as the unsteady thrust and torque acting on the propeller. Sample calculations as well as wind tunnel and flight test results are presented which illustrates the sensitivity of a propeller to flow field in which it is operating.