Search NASA⌕ Search

Engineering topics

Allan, D. W.

Publications and source records attributed to Allan, D. W..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

High-accuracy global time and frequency transfer with a space-borne hydrogen maser clock

A proposed system for high-accuracy global time and frequency transfer using a hydrogen maser clock in a space vehicle is discussed. Direct frequency transfer with a accuracy of 10 to the minus 14th power and time transfer with an estimated accuracy of 1 nsec are provided by a 3-link microwave system. A short pulse laser system is included for subnanosecond time transfer and system calibration. The results of studies including operational aspects, error sources, data flow, system configuration, and implementation requirements for an initial demonstration experiment using the Space Shuttle are discussed.

Decher, R.↗
NASA NTRS1983

Stochastic models for atomic clocks

For the atomic clocks used in the National Bureau of Standards Time Scales, an adequate model is the superposition of white FM, random walk FM, and linear frequency drift for times longer than about one minute. The model was tested on several clocks using maximum likelihood techniques for parameter estimation and the residuals were acceptably random. Conventional diagnostics indicate that additional model elements contribute no significant improvement to the model even at the expense of the added model complexity.

Barnes, J. A.↗
NASA NTRS1982

Shuttle experiment to demonstrate high-accuracy global time and frequency transfer

The concept of a high-accuracy global time and frequency transfer system is discussed. A hydrogen maser clock onboard a space vehicle combined with a microwave Doppler cancellation system can provide direct frequency transfer with an accuracy of 10 to the -14th and time transfer accurate to 1 ns. The addition of short pulse laser techniques provides subnanosecond time transfer accuracy which can be used to calibrate the microwave system.

Allan, D. W.↗
NASA NTRS1982

Unprecented syntonization and syncronization accuracy via simultaneous viewing with GPS receivers: Construction characteristics of an NBS/GPS receiver

The National Bureau of Standards/Global Positioning System (NBS/GPS) receiver is discussed. It is designed around the concept of obtaining high accuracy, low cost time and frequency comparisons between remote frequency standards and clocks with the intent to aid international time and frequency coordination. Preliminary tests of this comparison technique between Boulder, CO and Washington, D.C indicate the ability to do accurate time transfer to better that 10 ns, and frequency measurements to better than 1 part in 10 to the 14th power. The hardware and software of the receiver is detailed. The receiver is fully automatic with a built-in 0.1 ns resolution time interval counter. A microprocessor does data processing. Satellite signal stabilities are routinely at the 5 ns level for 15 s averages, and the internal receiver stabilities are at the 1 ns level.

Davis, D. D.↗
NASA NTRS1981

A space system for high-accuracy global time and frequency comparison of clocks

A Space Shuttle experiment in which a hydrogen maser clock on board the Space Shuttle will be compared with clocks on the ground using two-way microwave and short pulse laser signals is described. The accuracy goal for the experiment is 1 nsec or better for the time transfer and 10 to the minus 14th power for the frequency comparison. A direct frequency comparison of primary standards at the 10 to the minus 14th power accuracy level is a unique feature of the proposed system. Both time and frequency transfer will be accomplished by microwave transmission, while the laser signals provide calibration of the system as well as subnanosecond time transfer.

Decher, R.↗
NASA NTRS1981

Construction and performance characteristics of a prototype NBS/GPS receiver

The construction and performance characteristics of a low-cost, high-accuracy GPS C/A receiver are reviewed. The receiver takes advantage of a simultaneous common view of the same satellites, which could allow time transfer with accuracies on the order of 10 ns or less for baselines as large as 3000 km. Frequency can be measured to better than one part in 10 to the 14th. The software and the receiver are configured to be fully automatic with a Z80A microprocessor setting the amplitude for the lock loops of the receiver and setting the synthesizer with corrects for Doppler shift. The microprocessor can calibrate a 0.1 ns built-in time interval counter.

Davis, D. D.↗
NASA NTRS1980

Shuttle time and frequency transfer experiment

A proposed space shuttle experiment to demonstrate techniques for global high precision comparison of clocks and primary frequency standards is described. The experiment, using transmitted microwave and pulsed laser signals, compared a hydrogen maser clock onboard the space shuttle with a clock in a ground station in order to demonstrate time transfer with accuracies of 1 nsec or better and frequency comparison at the 10 to the -14th power accuracy level.

Allan, D. W.↗
NASA NTRS1974

The measurement of frequency and frequency stability of precision oscillators

The specification and performance of precision oscillators is discussed as a very important topic to the owners and users of these oscillators. This paper presents at the tutorial level some convenient methods of measuring the frequencies of precision oscillators -- giving advantages and disadvantages of these methods. Further it is shown that by processing the data from the frequency measurements in certain ways, one may be able to state more general characteristics of the oscillators being measured. The goal in this regard is to allow the comparisons of different manufacturers' specifications and more importantly to help assess whether these oscillators will meet the standard of performance the user may have in a particular application.

Allan, D. W.↗