Search NASASearch

Engineering topics

Allario, F.

Publications and source records attributed to Allario, F..

32 records · Page 2

Measurements of NH3 absorption coefficients with a C-13/O-16/2 laser

Measurements of NH3 absorption coefficients are presented for several transitions of a C-13(O-16)2 laser for small concentrations of NH3(p less than 1 torr) for absorption lines broadened to 1 atm with N2. NH3 absorption coefficients were determined for laser transitions R(8)(920.2194 wavelengths/cm) to R(28)(933.8808 wavelengths/cm) of the 00 1 - (10 0,02 0)I band. The strongest absorption coefficient K = 36.09 + or - 1.43 per (atm-cm) was measured for the R(18) transition for the NH3 line, aQ(6,6), and is larger than has been found in any previous measurements with a CO2 laser. The dependence of K on total pressure was also obtained for select transitions, and the frequency separation between the R(18) laser transition and the neighboring NH3 line aQ(6,6) was determined to be 550 + or - 50 MHz. These results are significant for long path absorption monitoring of NH3 with CO2 lasers since the path length can be reduced by approximately 40% and for heterodyne detection of NH3 since the relative position of the laser transition to the NH3 absorption line is well within the bandpass of Hg-Cd-Te photomixers.

Allario, F.

Wavelength-selective, sequential Q-switching laser cavity

Single-frequency continuous output of laser is converted into series of high-power laser pulses at high repetition rates. Applications include pollutant detection by absorption, laser gain measurements at discrete wavelengths, laser propagation measurement, and laser plasma diagnostics.

Allario, F.

Simple technique for sequential Q-switching of molecular lasers.

A simple technique for sequentially Q-switching molecular lasers is discussed in which an optical scanner is used as an optical folding element in a laser cavity consisting of a stationary diffraction grating and partially reflecting mirror. Sequential Q-switching of a conventional CO2 laser is demonstrated in which over sixty-two transitions between 9.2 and 10.8 microns are observed. Rapid repetition rates (200 Hz) and narrow laser pulses (less than 5 microsec) allow conventional signal processing techniques to be used with this multiwavelength laser source which is a versatile tool for laser propagation studies, absorption spectroscopy, and gain measurements. Results of a preliminary experiment demonstrating the utility of measuring selective absorption of CO2 laser wavelengths by C2H4 are shown.

Lucht, R. A.

CO2 laser experiments using nuclear reactions as the ionization source.

Experimental studies show that the output of a CO2 laser is significantly increased by products of the nuclear reaction He-3 (n,p)T. Helium-3 was used in lieu of the natural helium normally present in the 1:1:8 CO2:N2:He laser gas mixture (pressure = 6 torr). The laser assembly was then exposed to a reactor thermal neutron flux of about 100 million neutrons/sq cm/sec. Power output of the laser doubled while the electrical power input decreased; electrical efficiency was thus more than doubled. Results indicate that additional ionization by the energetic charged particles may be responsible for the improved laser performance.

Rhoads, H. S.