Search NASA⌕ Search

Engineering topics

Allison, C. B.

Publications and source records attributed to Allison, C. B..

7 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Open-loop response of a burning liquid monopropellant

A direct comparison was obtained between the theoretical and experimental response of a burning liquid monopropellant surface to imposed pressure oscillations. The comparison extended beyond the quasi-steady frequency regime into the range where the combustion process interacts with the thermal wave in the liquid phase. The theory considered both gas and liquid-phase transient effects, involving a numerically integrated, first-order perturbation analysis. The experiment employed hydrazine as the test fuel, burning as a strand. With kinetic parameters fixed by steady burning rate measurements, the model gave good predictions of liquid-phase temperature distributions during steady combustion as well as the amplitude and phase of the oscillatory component of the burning rate in the presence of imposed pressure oscillations. The combustion response tends to peak in two frequency ranges; one corresponding to interaction with liquid-phase transient effects, which could be verified both theoretically and experimentally; the second corresponding to gas-phase transient effects, which could only be examined theoretically. Both ranges provide conditions where the amplifying power is sufficient to drive combustion instability.

Allison, C. B.↗
NASA NTRS1974

Burning rate response of liquid monopropellants to imposed pressure oscillations

The combustion characteristics of hydrazine strands were studied under both steady state and oscillatory conditions. A steady strand burner was used to measure steady strand burning rates, liquid temperature distributions and surface temperatures as a function of pressure in the pressure range of 0.32 to 42 atm. It was found that for subatmospheric pressures the burning rate varied as the square root of pressure; for pressures greater than atmospheric the burning rate varied linearly with pressure. A theoretical model of the strand combustion system was developed and matched to the steady burning rates by assuming a reaction order of one for subatmospheric pressures and a reaction order of two for pressures greater than atmospheric. The model was also found to be in good agreement with measurements of liquid temperature distributions and surface temperatures. The results show an increse in the response of the combustion process as interaction occurs with transient liquid phase effects, yielding a band of frequencies where the combustion process exerts sufficient amplifying power to provide a mechanism for driving combustion instability.

Allison, C. B.↗
NASA NTRS1973

The investigation of critical burning of fuel droplets

The combustion and evaporation of liquid fuels at high pressures were investigated. Particular emphasis was placed on conditions where the liquid surface approaches the thermodynamic critical point during combustion. The influence of transient effects on a burning liquid fuel was also investigated through both analysis and measurements of the response of liquid monopropellant combustion to imposed pressure oscillations. Work was divided into four phases (1) Droplet combustion at high pressures, which consider both measurement and analysis of the porous sphere burning rate of liquids in a natural convection environment at elevated pressure. (2) High pressure droplet burning in combustion gases, which involved steady burning and evaporation of liquids from porous spheres in a high pressure environment that simulates actual combustion chamber conditions. (3) Liquid strand combustion, which considered the burning rate, the state of the liquid surface and the liquid phase temperature distribution of a burning liquid monopropellant column over a range of pressures. (4) Oscillatory combustion, which was a theoretical and experimental investigation of the response of a burning liquid monopropellant to pressure oscillations.

Allison, C. B.↗
NASA NTRS1972

Investigation of critical burning of fuel droplets

Fuel droplets were simulated by porous spheres having diameters in the range 0.63 to 1.9 cm and combustion tests were conducted at pressures up to 78 atm in a quiescent cold air environment. Measurements were made of the burning rate and liquid surface temperature during steady combustion. A high pressure flat flame burner apparatus is under development in order to allow testing of high pressure droplet burning in a combustion gas environment. Work was continued on the high pressure strand combustion characteristics of liquid fuels, with the major emphasis on hydrazine. Data was obtained on the burning rate and liquid surface temperatures at pressures in the range 7 to 500 psia. The response of a burning liquid monopropellant to imposed pressure oscillations is being investigated.

Allison, C. B.↗
NASA NTRS1972

Investigation of critical burning of fuel droplets

Measurements were made on the burning of liquid hydrazine, MMH, and UDMH in a combustion gas environment. The experimental range of these tests involved gas temperatures of 1660-2530 K, oxygen concentrations of 0-42% by mass and droplet diameters (employing both droplets and porous spheres) of 0.11-1.91 cm. at atmospheric pressure. A simplified hybrid combustion theory was developed which was found to correlate the present results as well as the experimental measurements of other investigators. Measurements were also made of the monopropellant strand burning rates and liquid surface temperatures of a number of nitrate ester fuels and hydrazine at elevated pressures. The temperature measurements for the nitrate esters were found to be in good agreement with a theoretical model which allowed for gas solubility in the liquid phase at high pressures. Experimental results were also obtained on the burning rates and liquid surface temperatures of a number of paraffin and alcohol fuels burning in air pressures up to 72 atm. For these tests, the fuels were burned from porous spheres in a natural convection environment. Initial findings on a pressurized flat flame burner are also described as well as the design of an oscillatory combustion apparatus to test the response of burning liquid fuels.

Allison, C. B.↗