Engineering topics

Almallahi, Rawan

Publications and source records attributed to Almallahi, Rawan.

2 records

DOE OSTI2024

Overcoming limitations in propanedehydrogenation by codesigning catalyst-membrane systems

Propylene production through propane dehydrogenation (PDH) is endothermic, and high temperatures required to achieve acceptable propane conversions lead to low selectivity and severe carbon-induced deactivation of conventional catalysts. We developed a catalyst-membrane system that removes the hydrogen by-product and can thus achieve propane conversions that exceed equilibrium limits. In this codesigned system, a silica/alumina (SiO 2 /Al 2 O 3 ) hollow-fiber hydrogen membrane was packed with a selective platinum-tin (Pt 1 Sn 1 /SiO 2 ) PDH catalyst on the tube side with hydrogen diffusing from the tube to the shell side. We demonstrate that the catalyst-membrane system can achieve propane conversions >140% of the nominal equilibrium conversion with a propylene selectivity >98% without deactivation of the system components. Here, we also show that by introducing oxygen on the shell side of the catalyst-membrane system, we can couple the endothermic PDH reaction on the tube side with exothermic hydrogen oxidation on the shell side. This coupling results in higher rates of hydrogen transport, leading to further enhancements in the propane conversion as well as desired thermoneutral system operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Optimizing hierarchical membrane/catalyst systems for oxidative coupling of methane using additive manufacturing

The advantage of a membrane/catalyst system in oxidative coupling of methane (OCM) compared to conventional reactive systems is that by introducing oxygen to the OCM catalytic sites through a membrane, parasitic gas phase reactions of O 2 (g), responsible for lowering product selectivity, can be avoided. The design and fabrication of membrane/catalyst systems has, however, been hampered by low volumetric chemical conversion rates, high capital cost, and difficulties in codesigning membrane and catalyst properties to optimize the performance. We solve these issues by developing a dual-layer additive manufacturing process, based on phase inversion, to design, fabricate and optimize a hollow fiber membrane/catalyst system for OCM. We demonstrate the approach though a case study using BaCe 0.8 Gd 0.2 O 3-δ (BCG) as the basis of both the catalyst and separation layers. We show that by using the manufacturing approach we can codesign the membrane thickness and catalyst surface area so that the flux of oxygen transport through the membrane and methane activation rates in the catalyst layer match each other. Here, we demonstrate that this “rate matching” is critical for maximizing the performance, with the membrane/catalyst system significantly overperforming conventional reactor designs under identical conditions.

36 MATERIALS SCIENCE↗