Search NASA⌕ Search

Engineering topics

Altman, Eric I

Publications and source records attributed to Altman, Eric I.

Combined low-temperature scanning tunneling/atomic force microscope for atomic resolution imaging and site-specific force spectroscopy

The authors present the design and first results of a low-temperature, ultrahigh vacuum scanning probe microscope enabling atomic resolution imaging in both scanning tunneling microscopy (STM) and noncontact atomic force microscopy (NC-AFM) modes. A tuning-fork-based sensor provides flexibility in selecting probe tip materials, which can be either metallic or nonmetallic. When choosing a conducting tip and sample, simultaneous STM/NC-AFM data acquisition is possible. Noticeable characteristics that distinguish this setup from similar systems providing simultaneous STM/NC-AFM capabilities are its combination of relative compactness (on-top bath cryostat needs no pit), in situ exchange of tip and sample at low temperatures, short turnaround times, modest helium consumption, and unrestricted access from dedicated flanges. The latter permits not only the optical surveillance of the tip during approach but also the direct deposition of molecules or atoms on either tip or sample while they remain cold. Atomic corrugations as low as 1 pm could successfully be resolved. In addition, lateral drifts rates of below 15 pm/h allow long-term data acquisition series and the recording of site-specific spectroscopy maps. Results obtained on Cu(111) and graphite illustrate the microscope's performance.

36 MATERIALS SCIENCE↗

Measurement of electronic structure at nanoscale solid-solid interfaces by surface-sensitive electron spectroscopy

We explore the use of electron spectroscopy that samples the near-surface region of a crystal to study the electronic structure at the buried interfaces between two dissimilar transition-metal oxides. The interface is probed by comparing experimental ultraviolet photoelectron spectra to model spectra and by taking sequential differences between the experimental spectra as one oxide is grown on another. Using (100) Fe{sub 3}O{sub 4}-NiO and Fe{sub 3}O{sub 4}-CoO interfaces grown by molecular beam epitaxy, we show that there is a much higher density of electronic states at the Fe{sub 3}O{sub 4}-CoO interface than at the Fe{sub 3}O{sub 4}-NiO interface. The origin of this difference is discussed.

36 MATERIALS SCIENCE↗