Search NASA⌕ Search

Engineering topics

Amoroso, Jake W.

Publications and source records attributed to Amoroso, Jake W..

26 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Evaluation of a Combined Raffinate Waste Stream for Mo-99 Production

Niowave, Inc., based in Lansing, Michigan, intends to produce Mo-99 from the fission of low enriched uranium (LEU) targets. In FY20, SRNL was tasked to provide technical assistance in identifying the primary waste raffinate present in Niowave’s commercial scale system and evaluating methods for disposal. Due to limited information on Niowave’s complete flowsheet and isotope recovery plans, a combined raffinate stream including the entire radionuclide inventory from the irradiated fuel was used for this evaluation. Results of the evaluation indicated the majority of the waste generated can be expected to be Class A; however radioisotopes such as Pu-239, Cs-137, Sr-90, and some of the shorter lived (< 5 year half-life) may challenge Niowave’s ability to meet the waste acceptance criteria for land burial. With appropriate waste management strategies, it is probable that Niowave’s waste could meet Class C requirements for all constituents, with the possible exception of Pu-239. More detailed information of Niowave’s processes are needed to form a more accurate understanding required to execute and effective, economic, and feasible waste management strategy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Anion-exchanged and quaternary ammonium functionalized MIL-101-Cr metal-organic framework (MOF) for ReO 4 – /TcO 4 – sequestration from groundwater

There are few effective technologies for the sequestration of highly water-soluble pertechnetate (TcO 4 – ) from contaminated water despite the urgency of environmental and public health concerns. Here, anion exchanged and cetyltrimethylammonium bromide (CTAB) functionalized MIL-101-Cr-NO 3 were investigated for perrhenate (ReO 4 – ), a surrogate of TcO 4 – , sequestration from artificial groundwater. Cl – , I – , and CF 3 SO 3 – exchanged MIL-101-Cr proved more effective at ReO 4 – removal than the parent MIL-101-Cr-F. Compared to the parent framework, CTAB functionalized MIL-101-Cr-NO 3 increased ReO 4 – removal capacity from 39 to 139 mg/g, improved the reaction kinetics from ~30 to <10 min to reach full adsorption capacity and the selectivity for ReO 4 – over competing NO 3 – , CO 3 2– , SO 4 2– , and Cl – . Spectroscopic data indicated that the chemical speciation of Re in the exchanged MIL-101-Cr remained ReO 4 – , indicating synergistic sequestration through both anion exchange and non-ion exchange binding with the positively charged ligand of CTAB. These studies foreshadow potential applications of MOFs for the remediation of 99 TcO 4 – from contaminated environments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Structure and stability of alkali gallates structurally reminiscent of hollandite

Abstract Single crystals of CsGa 7 O 11 , RbGa 7 O 11 , and RbGa 4 In 5 O 14 were grown from alkali halide melts and their structures were characterized by single crystal and powder X‐ray diffraction. CsGa 7 O 11 and RbGa 7 O 11 adopt the same structure type, reminiscent of the hollandite structure type, as it contains nearly rectangular channels made up of two dimers of edge‐sharing GaO 6 octahedra, and two corner‐sharing octahedron/tetrahedron pairs. The structure of RbGa 4 In 5 O 14 is more complex and is comprised of indium octahedra, gallium trigonal bipyramids, and gallium tetrahedra, and contains similar sized tunnels as CsGa 7 O 11 and RbGa 7 O 11 . CsGa 7 O 11 and RbGa 4 In 5 O 14 were further characterized by TGA, ion exchange experiments, and DFT studies revealing that both structures are thermodynamically stable up to 850°C; however, CsGa 7 O 11 decomposes to GaO(OH) xH 2 O when heated in warm aqueous solutions. CsGa 7 O 11 undergoes ion exchange in both an aqueous solution of RbCl and a RbNO 3 melt, as predicted by DFT studies, where the ion exchange is more extensive in the RbNO 3 melt.

Juillerat, Christian A.↗
DOE OSTI2020

Progress and Technology Assessment of Melt-Cast Ceramic Waste Forms

The Savannah River National Laboratory (SRNL) conducted research from FY2011 – FY2020 to develop ceramic waste forms to treat High-Level Waste (HLW) resulting from reprocessing of commercial Used Nuclear Fuel (UNF) as part of the Department of Energy (DOE) office of Nuclear Energy (NE) Fuel Cycle Technologies (FCT) research program. The objective of the research was to develop a reference ceramic waste form and process technology needed to immobilize the combined HLW raffinate stream, including undissolved solids and soluble technetium, and potentially the TRU waste stream resulting from reprocessing processes. This report compiles the relevant literature produced under, and pertinent to, the program objectives and provides a perspective on the technology development as well as prospects for future.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Nepheline crystallization and the residual glass composition: Understanding waste glass durability

The vast majority of High-Level Waste (HLW) originating from defense nuclear programs is sequestered and immobilized in borosilicate glass. Borosilicate glass is universally accepted for immobilizing HLW, but its efficiency has limitations based on the compositional makeup of the waste stream. The chemical durability of the glass is the most important factor in determining the longevity and usefulness of the final glass waste form. The primary detriment to this durability in glasses containing high levels of aluminum is nepheline (NaAlSiO 4 ) crystallization, as it is generally accompanied by a measurable decrease in the glass's chemical durability. This work seeks to understand nepheline crystallization, within the context of thermal history, and to elucidate the influence of compositional shifts in the residual glass (after crystallization) on the measured durability. The results presented within show a distinct deviation in leaching behavior as a function of structural makeup (calculated Q units). This understanding will provide practical information required for broadening glass compositional regions needed to more efficiently vitrify HLW.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Single step solution combustion synthesis of crystalline transuranic-doped rare earth zirconate pyrochlores

One-step solution combustion synthesis (SCS) methods for fabricating durable crystalline transuranic-doped rare earth zirconium pyrochlores are described. Methods are fast, amenable to upscaling, and present a simple strategy for producing crystalline ceramic materials that meet the minimum attractiveness criteria for special nuclear material. The methods include analysis of reactants and reaction conditions to select proper fuel as well as proper fuel content so as to encourage formation of the crystalline product in a single-step synthesis procedure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Non-contact electrochemical evaluation of biofilms

Abstract Here, we demonstrate a non-contact technique for electrochemical evaluation of biofilms on surfaces in relation to corrosion. Electrochemical impedance spectrometry was employed, incorporating flat patterned electrodes positioned over the surfaces of aluminum and glass with and without biofilms. Signal communication from the working electrode to the counter electrode followed electric field lines passing tangentially through the biofilms. Electrochemical impedance parameters that were evaluated included complex impedance, phase angle, imaginary (out of phase) conductivity and Cole–Cole plots with a corresponding equivalent circuit. Changes in the impedance properties due to the presence of biofilms were monitored and correlated through microbiological, chemical and electrochemical assays. Impedance parameters associated with microbial activity correlated with biofilms on aluminum and glass surfaces. This technical approach provides impedance information about the biofilm without the signal traveling through the underlying conductive media or disrupting the biofilm. In this way, biological contributions to surface fouling can be evaluated with minimal contribution from the inorganic surface under the biofilm. In addition, this technique can be used to monitor biofilms on electrochemically inert surfaces as well as electrically conductive surfaces. Graphic abstract

Turick, Charles E. (ORCID:0000000307815846)↗