Search NASA⌕ Search

Engineering topics

Amsler, Maximilian

Publications and source records attributed to Amsler, Maximilian.

At least 19 records

Quantum-centric supercomputing for materials science: A perspective on challenges and future directions

Computational models are an essential tool for the design, characterization, and discovery of novel materials. Computationally hard tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their resources for simulation, analysis, and data processing. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of the computational tasks needed for materials science. In order to do that, the quantum technology must interact with conventional high-performance computing in several ways: approximate results validation, identification of hard problems, and synergies in quantum-centric supercomputing. Here in this paper, we provide a perspective on how quantum-centric supercomputing can help address critical computational problems in materials science, the challenges to face in order to solve representative use cases, and new suggested directions.

36 MATERIALS SCIENCE↗

Quantum-centric Supercomputing for Materials Science: A Perspective on Challenges and Future Directions

Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of the computational tasks needed for materials science. In order to do that, the quantum technology must interact with conventional high-performance computing in several ways: approximate results validation, identification of hard problems, and synergies in quantum-centric supercomputing. In this paper, we provide a perspective on how quantum-centric supercomputing can help address critical computational problems in materials science, the challenges to face in order to solve representative use cases, and new suggested directions.

Alexeev, Yuri↗

The 2021 room-temperature superconductivity roadmap

Designing materials with advanced functionalities is the main focus of contemporary solid-state physics and chemistry. Research efforts worldwide are funneled into a few high-end goals, one of the oldest, and most fascinating of which is the search for an ambient temperature superconductor (A-SC). The reason is clear: superconductivity at ambient conditions implies being able to handle, measure and access a single, coherent, macroscopic quantum mechanical state without the limitations associated with cryogenics and pressurization. This would not only open exciting avenues for fundamental research, but also pave the road for a wide range of technological applications, affecting strategic areas such as energy conservation and climate change. In this roadmap we have collected contributions from many of the main actors working on superconductivity, and asked them to share their personal viewpoint on the field. The hope is that this article will serve not only as an instantaneous picture of the status of research, but also as a true roadmap defining the main long-term theoretical and experimental challenges that lie ahead. Interestingly, although the current research in superconductor design is dominated by conventional (phonon-mediated) superconductors, there seems to be a widespread consensus that achieving A-SC may require different pairing mechanisms.

"Toward hot superconductivity"↗

Low-Energy Phases of Bi Monolayer Predicted by Structure Search in Two Dimensions

Here we employ an ab-initio structure search algorithm to explore the configurational space of bismuth in quasi-two dimensions. A confinement potential is introduced to restrict the movement of atoms within a predefined thickness to find the stable and metastable forms of monolayer Bi. In addition to the two known low-energy structures (puckered monoclinic and buckled hexagonal), our calculations predict three new phases:α, β, and γ. Each phase exhibits peculiar electronic properties, ranging from metallic (αandγ)to semiconducting (puckered monoclinic, buckled hexagonal, and β) monolayers. Topologically nontrivial features are predicted for buckled hexagonal andγphases. We also remark on the role of 5d electrons on the electronic properties of Bi monolayer. We conclude that Bi provides a rich playground to study distortion-mediated metal-insulator phase transitions in quasi-2D.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ternary mixed-anion semiconductors with tunable band gaps from machine-learning and crystal structure prediction

In this paper, we report the computational investigation of a series of ternary $X_4Y_2Z$ and $X_5Y_2Z_2$ compounds with $X$ =Mg, Ca, Sr, Ba; $Y$ =P, As, Sb, Bi; and $Z$ =S, Se, Te. The compositions for these materials were predicted through a search guided by machine learning, while the structures were resolved using the minima hopping crystal structure prediction method. Based on ab initio calculations, we predict that many of these phases are thermodynamically stable. In particular, 21 of the $X_4Y_2Z$ compounds crystallize in a tetragonal structure with $I\bar{4}2d$ symmetry, and exhibit band gaps in the range of 0.8 and 1.8 eV, well suited for various energy applications. We show that several candidates (in particular $X_4Y_2$ Te and $X_4\mathrm{Sb_2Se}$) exhibit good photo absorption in the visible range, while others (e.g., $\mathrm{Ba_4Sb_2Se}$) show excellent thermoelectric performance due to high power factors and extremely low lattice thermal conductivities.

36 MATERIALS SCIENCE↗

Thermodynamics and superconductivity of S x Se 1 - x H 3

The compression of SH 2 and its subsequent decomposition to SH 3 , presumably in a cubic $Im\bar{3}m$ structure, has lead to the discovery of conventional superconductivity with the highest measured and confirmed T sub>c to date, 203 K at 160 GPa. Recent theoretical studies suggest that a mixture of S with other elements of the chalcogen group could improve the superconducting temperature. Here, we present a detailed analysis of the thermodynamic properties of S and Se mixtures in the bcc lattice with $Im\bar{3}m$ symmetry using a cluster expansion technique to explore the phase diagram of S x Se 1- x H 3 . In contrast to earlier reports, we find that S 0.5 Se 0.5 H 3 is not stable in the pressure range between 150 and 200 GPa. However, phases at compositions S 0.2 Se 0.8 H 3 , S $0.\bar3$ Se $0.\bar6$ H 3 , and S 0.6 Se 0.4 H 3 are stable at 200 GPa, while additional phases at S 0.25 Se 0.75 H 3 and S 0.75 Se 0.25 H 3 are accessible at lower pressures. Electron-phonon calculations show that the values of T c are consistently lower for all ternary phases, indicating that mixtures of S and Se with H might not be a viable route towards compounds with improved superconducting properties.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optimized symmetry functions for machine-learning interatomic potentials of multicomponent systems

Current machine-learning methods to reproduce ab initio potential energy landscapes suffer from an unfavorable computational scaling with respect to the number of chemical species. In this work, we propose a new approach by using optimized symmetry functions to explore similarities of structures in multicomponent systems in order to yield linear complexity. Here, we combine these symmetry functions with the charge equilibration via neural network technique, a reliable artificial neural network potential for ionic materials, and apply this method to study alkali-halide materials MX with 6 chemical species (M = {Li, Na, K} and X = {F, Cl, Br}). Our results show that our approach provides good agreement both with experimental and DFT reference data of many physical and structural properties for any chemical combination.

74 ATOMIC AND MOLECULAR PHYSICS↗

Unraveling the structure and bonding evolution of the newly discovered iron oxide FeO 2

Recently reported synthesis of FeO 2 at high pressure has stimulated great interest in exploring this new iron oxide and elucidating its properties. Here, we present a systematic computational study of crystal structure, chemical bonding, and sound velocity of FeO 2 in a wide range of pressure. Our results establish thermodynamic stability of the experimentally observed pyrite phase (P-phase) of FeO 2 at pressures above 74 GPa and unveil two metastable FeO 2 phases in Pbcn and P4 2 /mnm symmetry at lower pressures. Simulated x-ray diffraction (XRD) spectra of Pbcn and P4 2 /mnm FeO 2 match well with measured XRD data of the decompression products of P-phase FeO 2 , providing compelling evidence for the presence of these metastable phases. Energetic calculations reveal unusually soft O-O bonds in P-phase FeO 2 stemming from a low-frequency libration mode of FeO 6 octahedra, rendering the O-O bond length highly sensitive to computational and physical environments. Calculated sound-velocity profiles of P-phase FeO 2 are markedly different from those of the Pbcn and P4 2 /mnm phases, underscoring their distinct seismic signatures. Here our findings offer insights for understanding the rich structural, bonding, and elastic behaviors of this newly discovered iron oxide.

36 MATERIALS SCIENCE↗

Crystal structure, energetics, and phase stability of strengthening precipitates in Mg alloys: A first-principles study

Magnesium alloys have attracted increasing interest due to their potential use as light-weight structural materials but their application is limited by their low strength compared to conventional alloys. Age hardening is commonly employed to form strengthening precipitates in such alloys, which impedes the motion of dislocations, and leads to improved strength. However, the exact composition, crystal structure, and energetics of many of these strengthening precipitates are either unknown or not clearly resolved, making the precise engineering and design of such alloys difficult. Toward this end, we use first-principles density functional theory calculations to elucidate the crystal structures and energetics of a very large set of precipitates in magnesium alloys. For cases where the precipitate crystal structure is not known, we comprehensively search over decorations of many prototype structures, including hcp superstructures, and in addition, perform global structural optimization using the Minima Hopping Method to predict suitable crystal structures. For all the strengthening precipitates, we calculate the formation energies, construct the respective zero temperature convex hulls, and analyze their stabilities. Here, we show that the bulk formation energies per solute atom (essentially, the solute chemical potentials) decrease along the observed sequences of precipitation, validating our calculations in Mg-{Nd, Gd, Y, Y-Nd, Nd-Zn, Gd-Zn, Y-Zn, Al, Zn, Sn, Al-Ca, Ca-Zn} alloy systems. In addition, we construct a monolayer model for the Guinier-Preston zones (GP zones) observed in the Mg-Nd-Zn system during early stages of age hardening, and thereby explain the formation of the γ" (Mg 5 (Nd,Zn)) phase from the GP zones, as observed in experiments.

36 MATERIALS SCIENCE↗

Designing and Discovering a New Family of Semiconducting Quaternary Heusler Compounds Based on the 18-Electron Rule

Intermetallic compounds with sizable band gaps are attractive for their unusual properties but rare. In this report, we present a new family of stable semiconducting quaternary Heusler compounds, designed based on the 18-electron rule and discovered by means of high-throughput ab initio calculations based on the 18-electron rule. The 99 new semiconductors reported here adopt the ordered quaternary Heusler structure with the prototype of LiMgSnPd (F4̅3m, No. 216) and contain 18 valence electrons per formula unit. They are realized by filling the void in the half Heusler structure with a small and electropositive atom, i.e., lithium. These new stable quaternary Heusler semiconductors possess band gaps in the range of 0.3 to 2.5 eV, and exhibit some unusual properties different from conventional semiconductors, such as strong optical absorption, giant dielectric screening, and high Seebeck coefficient, which suggest these semiconductors have potential applications as photovoltaic and thermoelectric materials. While this study opens up avenues for further exploration of this novel class of semiconducting quaternary Heuslers, the design strategy used herein is broadly applicable across a potentially wide array of chemistries to discover new stable materials.

36 MATERIALS SCIENCE↗

First-Principles Study of Lithium Cobalt Spinel Oxides: Correlating Structure and Electrochemistry

Embedding a lithiated cobalt oxide spinel (Li 2 Co 2 O 4 , or LiCoO 2 ) component or a nickel-substituted Li2Co 1-x NixO 2 analogue in structurally integrated cathodes such as xLi 2 MnO 3 .(1-x)LiM'O 2 (M' = Ni/Co/Mn) has been recently proposed as an approach to advance the performance of lithium-ion batteries. Here, we first revisit the phase stability and electrochemical performance of LiCoO 2 synthesized at different temperatures using density functional theory calculations. Consistent with previous studies, we find that the occurrence of low- and high-temperature structures (i.e., cubic lithiated spinel LT-LiCoO 2 ; or Li 2 Co 2 O 4 (Fd$\overline{3m}$) vs trigonal-layered HT-LiCoO 2 (R$\overline{3m}$), respectively) can be explained by a small difference in the free energy between these 20 30 40 50 60 70 80 26 two compounds. Additionally, the observed voltage profile of a Li/LiCoO 2 cell for both cubic and trigonal phases of LiCoO 2 , as well as the migration barrier for lithium diffusion from an octahedral (O h ) site to a tetrahedral site (T d ) in Fd$\overline{3m}$ LT-Li 1-x CoO 2 , has been calculated to help understand the complex electrochemical charge/discharge processes. A search of LiCo x M 1-x O 2 lithiated spinel (M' = Ni or Mn) structures and compositions is conducted to extend the exploration of the chemical space of Li-Co-Mn-Ni-O electrode materials. We predict a new lithiated spinel material, LiNi 0.8125 Co 0.1875 O 2 (Fd$\overline{3m}$), with a composition close to that of commercial, layered LiNi 0.8 Co 0.05 Al 0.05 O 2 , which may have the potential for exploitation in structurally integrated, layered spinel cathodes for next generation lithium-ion batteries.

25 ENERGY STORAGE↗

Cubine, a Quasi Two-Dimensional Copper–Bismuth Nanosheet

We report on the discovery of a quasi two-dimensional copper–bismuth nano sheet from ab initio calculations, which we call cubine. According to our predictions, single layers of cubine can be isolated from the recently reported high-pressure CuBi bulk material at an energetic cost of merely ≈20 meV/Å2, comparable to values to separate single layers of graphene from graphite. Our calculations suggest that cubine has remarkable electronic and electrochemical properties: It is a superconductor with a moderate electron–phonon coupling λ = 0.5, leading to Tc ≈ 1 K, and can be readily intercalated with lithium with a high diffusibility, rendering it a promising candidate material to boost the rate capacity of current electrodes in lithium-ion batteries.

Amsler, Maximilian↗

Dense superconducting phases of copper-bismuth at high pressure

Although copper and bismuth do not form any compounds at ambient conditions, two intermetallics, CuBi and Cu 11 Bi 7 , were recently synthesized at high pressures. Here we report on the discovery of additional copper-bismuth phases at elevated pressures with high densities from ab initio calculations. In particular, a Cu2Bi compound is found to be thermodynamically stable at pressures above 59 GPa, crystallizing in the cubic Laves structure. In strong contrast to Cu 11 Bi 7 and CuBi, cubic Cu 2 Bi does not exhibit any voids or channels. Since the bismuth lone pairs in cubic Cu 2 Bi are stereochemically inactive, the constituent elements can be closely packed and a high density of 10.52 g/cm 3 at 0 GPa is achieved. The moderate electron-phonon coupling of λ = 0.68 leads to a superconducting temperature of 2 K, which exceeds the values observed both in Cu 11 Bi 7 and CuBi, as well as in elemental Cu and Bi.

3-dimensional systems↗

Energy landscape of ZnO clusters and low-density polymorphs

In this paper, we report on an extensive study of ZnO materials with cagelike motifs in clusters and bulk phases through structural searches using the minima hopping method. A novel putative ground state was discovered for the (ZnO) 32 cluster with a tubelike structure, closely related to the previously reported (ZnO) 24 ground-state cage geometry. Furthermore, the effect of ionization on the geometries and energetic ordering of (ZnO) n clusters with n=3–10,12 was studied by directly sampling the energy landscape of the ionized system. Our results indicate that the transition from ring and planar structures to three-dimensional cages occurs at larger cluster sizes than in the neutral system. Inspired by the bottom-up design philosophy and the predominance of cagelike structures in medium-sized clusters, a search for crystalline ZnO was conducted aimed specifically at low-density polymorphs, resulting in the discovery of 57 novel metastable phases. The voids in these low-density materials closely resemble the hollow cage structures of small (ZnO) n /(ZnO)$^+_n$ clusters with n < 16. Analogous to clathrate materials, these voids could serve to accommodate guest atoms to tailor the materials properties for various applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-Dimensional Hexagonal Sheet of TiO 2

We report the ab initio discovery of a novel putative ground state for quasi two-dimensional TiO 2 through a structural search using the minima hopping method with an artificial neural network potential. Here, the structure is based on a honeycomb lattice and is energetically lower than the experimentally reported lepidocrocite sheet by 7 meV/atom and merely 13 meV/atom higher in energy than the rutile bulk structure. According to our calculations, the hexagonal sheet is stable against mechanical stress, chemically inert, and can be deposited on various substrates without disrupting the structure. Its properties differ significantly from all known TiO 2 bulk phases with a large gap of 5.05 eV that can be tuned through strain and defect engineering.

36 MATERIALS SCIENCE↗

Creating Binary Cu–Bi Compounds via High-Pressure Synthesis: A Combined Experimental and Theoretical Study

Exploration beyond the known phase space of thermodynamically stable compounds into the realm of metastable materials is a frontier of materials chemistry. The application of high pressure in experiment and theory provides a powerful vector by which to explore this uncharted phase space, allowing discovery of complex new structures and bonding in the solid state. We harnessed this approach for the Cu–Bi system, where the realization of new phases offers potential for exotic properties such as superconductivity. This potential is due to the presence of bismuth, which, by virtue of its status as one of the heaviest stable elements, forms a critical component in emergent materials such as superconductors and topological insulators. To fully investigate and understand the Cu–Bi system, we welded theoretical predictions with experiment to probe the Cu–Bi system under high pressures. By employing the powerful approach of in situ X-ray diffraction in a laser-heated diamond anvil cell (LHDAC), we thoroughly explored the high-pressure and high-temperature (high-PT) phase space to gain insight into the formation of intermetallic compounds at these conditions. We employed density functional theory (DFT) calculations to calculate a pressure versus temperature phase diagram, which correctly predicts that CuBi is stabilized at lower pressures than Cu11Bi7, and allows us to uncover the thermodynamic contributions responsible for the stability of each phase. Detailed comparisons between the NiAs structure type and the two high-pressure Cu–Bi phases, Cu11Bi7 and CuBi, reveal the preference for elemental segregation within the Cu–Bi phases, and highlight the unique channels and layers formed by ordered Cu vacancies. The electron localization function from DFT calculations account for the presence of these “voids” as a manifestation of the lone pair orientation on the Bi atoms. Our study demonstrates the power of joint experimental–computational work in exploring the chemistry occurring at high-PT conditions. The existence of multiple high-pressure-stabilized phases in the Cu–Bi binary system, which can be readily identified with in situ techniques, offers promise for other systems in which no ambient pressure phases are known to exist.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗