Search NASA⌕ Search

Engineering topics

Anderson, A. T.

Publications and source records attributed to Anderson, A. T..

At least 19 records

Meteoritic material in lunar highland samples from the Apollo 11 and 12 sites

Radiochemical neutron activation analyses for Ag, Au, Bi, Br, Cd, Cs, Ge, In, Ir, Ni, Os, Pd, Rb, Re, Sb, Te, Tl, U and Zn were carried out on 11 samples from the Apollo 11 and 12 sites (two samples of rock 12013, one granitic and one KREEPy; 4 KREEP fragments from 2-4 mm soil 12033,2; 4 anorthositic fragments from 1-3 mm soil 10085,104; 1 sample of 'Luny' rock-felsite-KREEP breccia 12013 10085,31 LR-1). Most Apollo 12 samples were found to have an Imbrium meteoritic component; others, typified by the Luny breccia, apparently contain a new meteoritic component of low Re content. Components of higher Ir/Au ratio (3L, 5L and 7) were found in Apollo 11 anorthositic samples; the fact that their enrichment in meteoritic siderophiles parallels that of Fe, Mg, REE and other KREEP elements is consistent with progressive contamination of an anorthositic crust. The Luny rock was tentatively classified Group 2, supporting the assignment of this group to Serenitatis.

Janssens, M.-J.↗

Landsat imagery for surface-mine inventory

The feasibility of using Landsat imagery for routine monitoring of surface mining and reclamation was tested in a two-county (1541 sq km) area of western Maryland. Two digital analysis methods were studied. The first, a four-band analysis distinguishing various strip mine associated classes and conditions, proved useful, but has limited extendibility over a seasonal or annual period. In the second approach, a band-ratio method was developed for measuring disturbed surface areas, and it proved to be both temporally and geographically extendible. For mines ranging between 31 and 244 acres, the measurement accuracy of total affected acreage was 92%. The use of Landsat satellite data together with multilevel sampling of aircraft and field verification inspections has shown that multispectral analysis of digital data is an effective means of monitoring the progress of surface mining operations.

Anderson, A. T.↗

Satellite data for surface-mine inventory

To determine the feasibility of satellite data for surface-mine inventory, particularly as it applies to coal, a case study was conducted in Maryland. A band-ratio method was developed to measure disturbed surface areas, and it proved to be extendible both temporally and geographically. This method was used to measure area changes in the region over three time periods from September 1972 through July 1974 and to map the entire two-county area for 1973. For mines ranging between 31 and 244 acres (12 to 98 hectares) the measurement accuracy of total affected acreage was determined to be 92%. Mines of 120 acres (50 hectares) and larger were measured with greater accuracy, some within one percent of the actual area. The ability to identify, classify, and measure strip-mine surfaces in a two-county area (1,541 square kilometers - 595 square miles) of western Maryland was demonstrated through the use of computer processing. On the basis of these results the use of LANDSAT satellite data and multilevel sampling of aircraft and field verification inspections, multispectral analysis of digital data is shown to be an effective, rapid, and accurate means of monitoring the surface mining cycle.

Anderson, A. T.↗

ERTS-1 data applied to strip mining

Two coal basins within the western region of the Potomac River Basin contain the largest strip-mining operations in western Maryland and West Virginia. The disturbed strip-mine areas were delineated along with the surrounding geological and vegetation features by using ERTS-1 data in both analog and digital form. The two digital systems employed were (1) the ERTS analysis system, a point-by-point digital analysis of spectral signatures based on known spectral values and (2) the LARS automatic data processing system. These two systems aided in efforts to determine the extent and state of strip mining in this region. Aircraft data, ground-verification information, and geological field studies also aided in the application of ERTS-1 imagery to perform an integrated analysis that assessed the adverse effects of strip mining. The results indicated that ERTS can both monitor and map the extent of strip mining to determine immediately the acreage affected and to indicate where future reclamation and revegetation may be necessary.

Anderson, A. T.↗

Application of Landsat imagery to metallic mineral exploration in Utah

Standard interpretive techniques were used to study the mosaic of two Landsat images of north central Utah including several major mining districts. Correlation of major Landsat-identified lineaments with the major metallic mining districts suggests that the Landsat-identified lineaments are fractures and that their distribution may be a valuable guide for identifying other mineralized areas. The imagery provides a more complete understanding of the geological information for identifying major tectonic and structural trends in the area. Several of the major mines are located on or closely adjacent to the intersections of at least two major lineaments. Landsat data should therefore be used to complement current mineral exploration programs.

Anderson, A. T.↗

LANDSAT inventory of surface-mined areas using extendible digital techniques

Multispectral analysis of LANDSAT imagery provides a rapid and accurate means of identification, classification, and measurement of strip-mined surfaces in Western Maryland. Four band analysis allows distinction of a variety of strip-mine associated classes, but has limited extendibility. A method for surface area measurement of strip mines, which is both geographically and temporally extendible, was developed using band-ratioed LANDSAT reflectance data. The accuracy of area measurement by this method, averaged over three LANDSAT scenes taken between September 1972 and July 1974, is greater than 93%. Total affected acreage of large (50 hectare/120 acre) mines can be measured to within 1.0%.

Anderson, A. T.↗

LANDSAT inventory of surface-mined areas using extendible digital techniques

Multispectral LANDSAT imagery was analyzed to provide a rapid and accurate means of identification, classification, and measurement of strip-mined surfaces in Western Maryland. Four band analysis allows distinction of a variety of strip-mine associated classes, but has limited extendibility. A method for surface area measurements of strip mines, which is both geographically and temporally extendible, has been developed using band-ratioed LANDSAT reflectance data. The accuracy of area measurement by this method, averaged over three LANDSAT scenes taken between September 1972 and July 1974, is greater than 93%. Total affected acreage of large (50 hectare/124 acre) mines can be measured to within 1.0%.

Anderson, A. T.↗

Geological applications of LANDSAT-1 imagery to the Great Salt Lake area

The ERTS program has been designed as a research and development tool to demonstrate that remote sensing from orbital altitudes is a feasible and practical approach to efficient management of earth resources. From this synoptic view and repetitive coverage provided by ERTS imagery of the Great Salt Lake area, large geological and structural features, trends, and patterns have been identified and mapped. A comparative analysis of lineaments observed in September and December data was conducted, existing mineral locations were plotted, and areas considered prospective for mineralization based on apparent structure-mineralization relationships were defined. The additional information obtained using ERTS data provides an added source of information to aid in the development of more effective mineral exploration programs.

Anderson, A. T.↗

A demonstration of ERTS-1 analog and digital techniques applied to strip mining in Maryland and West Virginia

The largest contour strip mining operations in western Maryland and West Virginia are located within the Georges Creek and the Upper Potomac Basins. These two coal basins lie within the Georges Creek (Wellersburg) syncline. The disturbed strip mine areas were delineated with the surrounding geological and vegetation features using ERTS-1 data in both analog (imagery) and digital form. The two digital systems used were: (1) the ERTS-Analysis system, a point-by-point digital analysis of spectral signatures based on known spectral values, and (2) the LARS Automatic Data Processing System. The digital techniques being developed will later be incorporated into a data base for land use planning. These two systems aided in efforts to determine the extent and state of strip mining in this region. Aircraft data, ground verification information, and geological field studies also aided in the application of ERTS-1 imagery to perform an integrated analysis that assessed the adverse effects of strip mining. The results indicated that ERTS can both monitor and map the extent of strip mining to determine immediately the acreage affected and indicate where future reclamation and revegetation may be necessary.

Anderson, A. T.↗

Flood hazards studies in the Mississippi River basin using remote sensing

The Spring 1973 Mississippi River flood was investigated using remotely sensed data from ERTS-1. Both manual and automatic analyses of the data indicated that ERTS-1 is extremely useful as a regional tool for flood mamagement. Quantitative estimates of area flooded were made in St. Charles County, Missouri and Arkansas. Flood hazard mapping was conducted in three study areas along the Mississippi River using pre-flood ERTS-1 imagery enlarged to 1:250,000 and 1:100,000 scale. Initial results indicate that ERTS-1 digital mapping of flood prone areas can be performed at 1:62,500 which is comparable to some conventional flood hazard map scales.

Rango, A.↗

ERTS-1 flood hazard studies in the Mississippi River Basin

The Spring 1973 Mississippi River flood was investigated using remotely sensed data from ERTS-1. Both manual and automatic analyses of the data indicate that ERTS-1 is extremely useful as a regional tool for flood and floodplain management. The maximum error of such flood area measurements is conservatively estimated to be less than five percent. Change detection analysis indicates that the flood had major impacts on soil moisture, land pattern stability, and vegetation stress. Flood hazard identification was conducted using photointerpretation techniques in three study areas along the Mississippi River using pre-flood ERTS-1 imagery down to 1:100,000 scale. Flood prone area boundaries obtained from ERTS-1 were generally in agreement with flood hazard maps produced by the U.S. Army Corps of Engineers and the U.S. Geological Survey although the latter are somewhat more detailed because of their larger scale. Initial results indicate that ERTS-1 digital mapping of the flood-prone areas can be performed at least 1:62,500 which is comparable to conventional flood hazard map scales.

Rango, A.↗

Environmental observations of the Great Salt Lake Basin from ERTS-1

Some ERTS-1 observations of snowcover, turbidity variations in the major lakes, surface water area changes, land use features, and phenomena associated with industrial emissions are described. Turbidity patterns in the major water bodies can be observed that appear to be related to the general wind flow, or to lake circulation patterns, and the chemical or biological constituents in the water. Monthly, seasonal, and annual changes in surface water extent can be monitored and serve as indicators of water availability. Time and space variations in snowcover that are a function of exposure or time of year were observed in some regions. Specific measurements of snowline altitude during the major snowmelt period of 1973 were obtained. The existence and effect of industrial emission on vegetation were found to be detectable.

Smith, A. F.↗

A comparison of Gemini and ERTS imagery obtained over southern Morocco

A mosaic constructed from three ERTS MSS band 5 images enlarged to 1:500,000 compares favorably with a similar scale geologic map of southern Morocco, and a near-similar scale Gemini 5 photo pair. A comparative plot of lineations and generalized geology on the three formats show that a significantly greater number of probable fractures are visible on the ERTS imagery than on the Gemini photography, and that both orbital formats show several times more lineaments than were previously mapped. A plot of mineral occurrences on the structural overlays indicates that definite structure-mineralization relationships exist; this finding is used to define underdeveloped areas which are prospective for mineralization. More detailed mapping is possible using MSS imagery than on Gemini 5 photographs, and in addition, the ERTS format is not restricted to limited coverage.

Blodget, H. W.↗

Apollo 14 lunar photography. Part 1: Data user's note

The availability of Apollo 14 pictorial data is announced to aid investigators in the selection of Apollo 14 photographs for study. Guidance in the interpretation of the photographs is provided. As background information, the note includes brief descriptions of the Apollo 14 mission objectives, photographic equipment, and photographic coverage and quality. The National Space Science Data Center (NSSDC) can provide the photographs described.

Anderson, A. T.↗