Search NASASearch

Engineering topics

Anderson, E.

Publications and source records attributed to Anderson, E..

Geomorphic and Geologic Controls of Geohazards induced by Nepal's 2015 Gorkha Earthquake

The Gorkha earthquake (Magnitude 7.8) on 25 April 2015 and later aftershocks struck South Asia, killing approx.9,000 and damaging a large region. Supported by a large campaign of responsive satellite data acquisitions over the earthquake disaster zone, our team undertook a satellite image survey of the earthquakes induced geohazards in Nepal and China and an assessment of the geomorphic, tectonic, and lithologic controls on quake-induced landslides. Timely analysis and communication aided response and recovery and informed decision makers. We mapped 4,312 co-seismic and post-seismic landslides. We also surveyed 491 glacier lakes for earthquake damage, but found only 9 landslide-impacted lakes and no visible satellite evidence of outbursts. Landslide densities correlate with slope, peak ground acceleration, surface downdrop, and specific metamorphic lithologies and large plutonic intrusions.

earthquake

Flood warnings, flood disaster assessments, and flood hazard reduction: the roles of orbital remote sensing

Orbital remote sensing of the Earth is now poised to make three fundamental contributions towards reducing the detrimental effects of extreme floods. Effective Flood warning requires frequent radar observation of the Earth's surface through cloud cover. In contrast, both optical and radar wavelengths will increasingly be used for disaster assessment and hazard reduction.

floods

Spectrographic observation at wavelengths near 630 nm of the interaction between the atmosphere and the Space Shuttle exhaust

The interaction between the Space Shuttle exhaust and the ambient atmosphere was studied using spectra in the wavelength region near 630 nm, obtained from the Air Force Maui Optical Station were the temporal, spatial, and spectral distribution of the emission in this region was recorded. The results show that, when the Space Shuttle exhaust gases interact with the atmosphere in the ram direction, an intense long-lasting emission is generated at 630 nm due to O(1D - 3P). A substantial amount of O(1D) is swept back onto the orbiter. Two processes responsible for the formation of O(1D) are proposed.

Broadfoot, A. L.

Testing and application of a viscous passive damper for use in precision truss structures

A passive damping device intended to replace individual struts in precision truss structures for space applications is described. The theory of operation of the D-Strut device is detailed, and simple five- and three-parameter models are derived. Results from tests conducted to characterize the D-Strut at submicron displacement levels are reporeted. The incorporation of a strut in a precision truss testbed is described. Parameters determined from the component-level tests are used in a finite element model of the truss, and damping augmentation is predicted. Using the simple three-parameter model, a damper is selected for multiple placement in a separate optical interferometer truss testbed. The effect of the addition of the damper struts is illustrated analytically in a model of the structure. Finally, an improved Arched Flexure D-Strut that is expected to provide higher loss factors, and is currently under development, is described.

Trubert, M.

Advanced wide-field broad-passband refracting field correctors for large telescopes

Design objectives, constraints, and optical data are presented for specific corrector designs under consideration for several large telescope projects. These include a preliminary 30-arcmin prime focus (f/2.0) refracting field corrector system for the University of California Ten-Meter Telescope (UC TMT); a compact 40-arcmin internal Cassegrain (f/1.75 hyperbola to f/5.0) broad-passband (3300 A to 1.0 micron) corrector suitable for imaging and multi-object spectroscopy at the UC TMT; three 60-arcmin Cassegrain correctors for 300-inch f/1.8 and f/2.0 parabolic primary mirrors suitable for a Fifteen-Meter NNTT/MMT; and a 300-inch 40-arcmin external Cassegrain (f/1.0 parabola to f/4.0) broad-passband (3300 A to 1.0 micron) corrector with ADC.

Epps, H. W.

Space Shuttle nozzle review

Two Space Shuttle solid propellant rocket motor (SRM) nozzles have been tested, both successfully. This paper summarizes the results of these tests. The SRM nozzle was designed and fabricated at the Wasatch Division of Thiokol Corporation. It is over 13 ft. long, has a 54.43 in. initial throat diameter, and weighs over 11 tons. A flex bearing is employed for thrust vector control. Design and acceptance testing summaries are presented, along with the post-test results, erosion and actuation data.

Canfield, A.

Mariner 9 television limb observations of dust and ice hazes on Mars

Results are presented for a statistical analysis of over 3000 Mariner 9 television reflectance profiles of the planetary limb of Mars for the period from the decaying phase of a global dust storm (southern summer) to southern winter solstice. It is shown that during the decaying phase of the storm, the dust is maintained aloft to high elevations by vertical mixing primarily in the equatorial zone, apparently by the direct or indirect action of the diurnal tide; the result is that the dust decay is much faster in high-latitude regions than near the equator. Significant dust remains aloft in Martian equatorial regions long after the major dust storms have subsided. At the top of the dusty atmosphere, a region exists where temperatures relax toward values expected for a dust-free CO2 atmosphere; this is therefore a region of convective overturning topped by thin condensation hazes resembling terrestrial noctilucent clouds, thereby showing occasionally gravity wave structures.

Anderson, E.