Determination of thermochemical properties of the molten PuCl3-NaCl eutectic mixture by high-temperature drop calorimetry
Not Available
Engineering topics
Publications and source records attributed to Andersson, David A..
Not Available
Not Available
Not Available
Uranium trichloride (UCl 3 ) has received growing interest for its use in uranium-fueled molten salt reactors and in the pyrochemical processing of used fuel. In this paper, we report for the first time the experimentally determined Raman spectra of UCl 3 , at both ambient condition and in situ high temperatures up to 871 K. The frequencies of five of the Raman-active vibrational modes (v i ) of UCl 3 exhibit a negative temperature derivative ((∂ν i /∂T) P ) with increasing temperature. Here, this red-shift behavior is likely due to the elongation of U–Cl bonds. The average isobaric mode Grüneisen parameter (γ iP = 0.91 ± 0.02) of UCl 3 was determined through use of the coefficient of thermal expansion published in Vogel et al. (2021) and the (∂ νi /∂T) P values determined in this study. These results are in general agreement with those calculated here by density functional theory (DFT+U). Finally, a comparison of the ambient band positions of UCl 3 to those of isostructural lanthanide (La–Eu) and actinide chlorides (Am–Cf) has been made.
The growth rate of structural defects in nuclear fuels under irradiation is intrinsically related to the diffusion rates of the defects in the fuel lattice. The generation and growth of atomistic structural defects can significantly alter the performance characteristics of the fuel. This alteration of functionality must be accurately captured to qualify a nuclear fuel for use in reactors. Predicting the diffusion coefficients of defects and how they impact macroscale properties such as swelling, gas release, and creep is therefore of significant importance in both the design of new nuclear fuels and the assessment of current fuel types. In this article, we apply data-driven methods focusing on machine learning (ML) to determine various diffusion properties of two nuclear fuels—uranium oxide and uranium nitride. We show that using ML can increase, often significantly, the accuracy of predicting diffusivity in nuclear fuels in comparison to current analytical models. We also illustrate how ML can be used to quickly develop fuel models with parameter dependencies that are more complex and robust than what is currently available in the literature. In conclusion, these results suggest there is potential for ML to accelerate the design, qualification, and implementation of nuclear fuels.
Machine learning interatomic potentials have emerged as a powerful tool for bypassing the spatiotemporal limitations of ab initio simulations, but major challenges remain in their efficient parameterization. We present AL4GAP, an ensemble active learning software workflow for generating multicomposition Gaussian approximation potentials (GAP) for arbitrary molten salt mixtures. The workflow capabilities include: (1) setting up user-defined combinatorial chemical spaces of charge neutral mixtures of arbitrary molten mixtures spanning 11 cations (Li, Na, K, Rb, Cs, Mg, Ca, Sr, Ba and two heavy species, Nd, and Th) and 4 anions (F, Cl, Br, and I), (2) configurational sampling using low-cost empirical parameterizations, (3) active learning for down-selecting configurational samples for single point density functional theory calculations at the level of Strongly Constrained and Appropriately Normed (SCAN) exchange-correlation functional, and (4) Bayesian optimization for hyperparameter tuning of two-body and many-body GAP models. Here, we apply the AL4GAP workflow to showcase high throughput generation of five independent GAP models for multicomposition binary-mixture melts, each of increasing complexity with respect to charge valency and electronic structure, namely: LiCl–KCl, NaCl–CaCl 2 , KCl–NdCl 3 , CaCl 2 –NdCl 3 , and KCl–ThCl 4 . Our results indicate that GAP models can accurately predict structure for diverse molten salt mixture with density functional theory (DFT)-SCAN accuracy, capturing the intermediate range ordering characteristic of the multivalent cationic melts.
Uranium dioxide (UO 2 ) is the primary nuclear fuel in light water reactors, and its excess neutronic reactivity can be controlled by adding burnable absorbers, such as Gd 2 O 3 . This burnable absorber has a large neutron absorption cross-section, lowering the high reactivity of the reactor's initial fuel load. However, there needs to be more understanding of how added Gd 2 O 3 influences the properties of UO 2 under irradiation. To understand the behavior of defects and fission gas in the UO 2 /Gd 2 O 3 system under irradiation, we use cluster dynamics modeling supported by density functional theory calculations. First, we calculate the formation energies of Gd point and cluster defects, and evaluate the temperature-dependent defect concentrations using the defect formation energies and entropies. We show that Gd is soluble in UO 2 , introducing a negative charge in the system. Using this information, we adapted the cluster dynamics code Centipede to model the influence of Gd on U self-diffusion and Xe diffusion in UO 2 with 10 wt% Gd 2 O 3 . Also, we analyzed the Xe diffusion as a function of Gd 2 O 3 concentration, showing that the Xe diffusivity is decreased, which means that the athermal diffusivity due to electronic stopping persists at higher temperatures. In conclusion, the decrease in Xe diffusion means that more Xe stays in the matrix, decreasing the Xe release, and lowering its influence of fission gas release on the thermomechanical properties of UO 2 .
The thermochemical details of fabricating uranium nitride (UN) by ammonolysis of uranium tetraflouride (UF 4 ) were determined using density functional theory (DFT) and CALculation of PHAse Diagrams (CALPHAD) computational methods. The thermochemical data of all binary, ternary, and quaternary U-H-N-F phases were computed using DFT, and the data for the phases that have not been measured experimentally, including UN 2 and NH 4 F(g), were combined with existing experimentally-determined data for CALPHAD modeling. The DFT data were benchmarked using experimental Gibbs energy of reaction and experimental thermochemical data for individual species. Phase diagrams relevant to the ammonolysis reaction are depicted, showing regions of stability for solid U-N, U-F and U-N-F phases. An unidentified phase produced in a previous experiment was identified as UN 0.95 F 1.2 (UNF) by comparing its X-ray diffraction spectrum to the experimental spectrum, and its formation during the fabrication of UN from UF 4 is supported by the simulated phase diagram. Here, it is calculated that UN 2 can be produced by the ammonolysis of UF 4 , but requires elevated temperatures, high NH 3 (g) partial pressure, and large amounts of flowing NH 3 (g) to avoid solid flu oride impurities in the uranium nitride. Likewise, U 2 N 3 can be produced instead at temperatures greater than 980 K. The use of silane (SiH 4 ) gas was investigated as a potential additive in the ammonolysis fabrication route to speed removal of fluorine. The addition of SiH 4 (g) offers little advantage to the removal of fluorine, and adds the complication of Si 3 N 4 formation. The use of DFT to fill in missing data to perform CALPHAD calculations demonstrated here allows for the determination of more comprehensive and trustworthy phase diagrams than the use of existing experimental data alone.
Uranium mononitride (UN) is a promising nuclear fuel that combines the advantageous properties of readily used UO 2 and uranium alloys. Various properties of UN have been previously studied using different density functional theory (DFT) methodologies; however, there are still inconsistencies when it comes to the dynamical stability and defect properties of UN. We address these inconsistencies by studying the UN phonons and defect properties using DFT calculations employing two generalized gradient approximation (GGA) exchange-correlation functionals: PBE and AM05, with and without an added on-site Coulomb repulsion term (+U). Furthermore, we investigate the importance of spin-orbit coupling (SOC) when calculating the properties of UN. We use the different methodologies to determine the preference of UN to have antiferromagnetic (AFM) ordering, as seen in experiments, or ferromagnetic (FM) ordering of the uranium spins. We compare the crystallographic properties, density of states, the DFT X-ray photoelectron spectra and phonon dispersions calculated using the different methodologies. We demonstrate that GGA + U reproduces the AFM ordering in UN, but the crystal structure is dynamically unstable. We also show that magnetic ordering is important in finding the lowest energy defective structure, and that SOC has a distinct influence on the energy of the different uranium interstitial defects. Lastly, we discuss the point defect formation energies under U-rich and N-rich conditions, and the stoichiometric formation energies calculated with the different methodologies, providing insight into the observed tendency for forming hypostoichiometric UN.
Abstract Actinide materials exhibit strong spin–lattice coupling and electronic correlations, and are predicted to host new emerging ground states. One example is piezomagnetism and magneto-elastic memory effect in the antiferromagnetic Mott-Hubbard insulator uranium dioxide, though its microscopic nature is under debate. Here, we report X-ray diffraction studies of oriented uranium dioxide crystals under strong pulsed magnetic fields. In the antiferromagnetic state a [888] Bragg diffraction peak follows the bulk magnetostriction that expands under magnetic fields. Upon reversal of the field the expansion turns to contraction, before the [888] peak follows the switching effect and piezomagnetic ‘butterfly’ behaviour, characteristic of two structures connected by time reversal symmetry. An unexpected splitting of the [888] peak is observed, indicating the simultaneous presence of time-reversed domains of the 3-k structure and a complex magnetic-field-induced evolution of the microstructure. These findings open the door for a microscopic understanding of the piezomagnetism and magnetic coupling across strong magneto-elastic interactions.
Here, the anticipated benefits of large grains in Cr 2 O 3 -doped UO 2 pellets include improved mechanical and fission gas retention properties. To support the assessment of fission gas release (FGR) from doped pellets, the impact of doping on fission gas diffusivity for in-reactor conditions must be understood. In this work, we tackle this issue by informing the fission gas model within the BISON fuel performance code using material models developed at the atomic scale. The investigation of intra-granular fission gas diffusivity in Cr 2 O 3 -doped UO 2 is carried out by adapting a cluster dynamics model that, accounting for UO 2 thermochemistry, is capable of describing Xe diffusion under irradiation in undoped UO 2 as the starting point. Using a thermodynamic analysis, it is shown that in stoichiometric UO 2 with additions of Cr 2 O 3 the oxygen potential is defined by the Cr-Cr 2 O 3 two-phase equilibrium. Using the cluster dynamics model, the predicted Xe diffusivity in doped UO 2 was significantly increased in both the intrinsic and irradiation-enhanced regimes compared to undoped UO 2 as a result of higher concentrations of uranium and oxygen vacancies, respectively. This is a consequence of the more oxidizing conditions at high temperature, and more reducing conditions at low temperature, as a result of doping. Arrhenius functions have been fitted to the cluster dynamics results to enable implementation of the new diffusivities in the BISON fission gas behavior model. BISON simulations were carried out, showing the competing effects of the enlarged grains and the new fission gas diffusivity model, which act to suppress and enhance fission gas release, respectively. The new physics-informed model was validated against in-reactor experimental measurements under normal operation. Additionally, benchmarking was carried out for power ramp conditions. The predicted fission gas release agreed well with the experimental data, showing noticeable improvements over the standard UO 2 model.
Diffusion of fission gas in UO 2 nuclear fuel impacts several important performance metrics, such as fission gas release, swelling, and thermal conductivity. Current empirical models of fission gas release have significant uncertainty, some of which derives from the bulk diffusion rate and its dependence on, for example, fuel chemistry and irradiation. In this work, we have applied the previously-developed Free Energy Cluster Dynamics (FECD) methodology in the code Centipede to calculate xenon cluster concentrations in UO 2 under intrinsic (high temperature) and irradiation-enhanced (intermediate temperature) conditions in order to develop a model of the xenon diffusion coefficient based on the atomic scale mechanisms responsible for transport. While the diffusion mechanism for xenon in UO 2 is adequately described by the Xe + U 2 O vacancy cluster for intrinsic conditions, a similar process is not capable of capturing measured in-pile fission gas diffusivity at intermediate temperatures. Therefore, a different diffusion mechanism must dominate under this regime. Using calculated atomistic data, we have shown that irradiation-enhanced diffusion at intermediate temperatures occurs via the larger Xe + U 4 O y vacancy clusters, which have lower migration barriers and increase in concentration by several orders of magnitude compared to intrinsic conditions. This mechanism is enabled by the increased uranium vacancy concentration under irradiation due to Frenkel pair production. In addition, the fast migration of uranium interstitials with two attached oxygen interstitials lowers the total uranium interstitial concentration through reactions with sinks. This allows the extended defects, such as Xe + U 4 O y vacancy clusters, to maintain high concentrations by limiting annihilation with attached vacancies. Furthermore, predictions using the Xe + U 4 O y diffusion mechanism are in good agreement with experiment, albeit with some differences in the Arrhenius slope, which we believe may be related to either experimental or model parameter uncertainty. Lastly, an analytical expression suitable for application in fuel performance simulations was derived to capture the predictions of the Centipede simulations.
While fission fragments pass through UO 2 nuclear fuel, a considerable concentration of Frenkel pair defects (i.e. vacancies and interstitials) are created. The steady-state concentration of these defects leads to enhanced uranium self-diffusion, one of several fundamental kinetic parameters that control key engineering properties such as creep and fission gas swelling in UO 2 nuclear fuel. A cluster dynamics method to track point defects and defect clusters has been implemented in the MARMOT phase-field code in order to predict as-measured out-of-pile and irradiation enhanced thermal diffusivity. Here, the calculated uranium self-diffusion coefficient compares well with non-irradiated fuel measurements, and shows similar trends to those observed in irradiated fuel, which is a good result given the complexities introduced by non-stoichiometric compositions.
The behavior of oxygen in Fe-Cr binary alloys is important to understand for a variety of applications including fuel cell interconnects and nuclear energy systems. In this work, we performed an ab initio investigation of the binding of oxygen in the entire compositional range of Fe-Cr at minima and saddles. This database was subsequently used to parametrize concentration-dependent local cluster expansions which were utilized to examine the kinetics of oxygen transport in the alloy and the thermodynamics of the system. The behavior of oxygen in the alloy system was investigated using our cluster expansion model and a convex hull diagram was recorded. The most favorable composition for the incorporation of oxygen was found to occur at 70% Cr. The dependence of the oxygen solution energy on the Cr occupation of the nearest neighbor shells was carefully characterized. It was determined that the third nearest neighbor Cr occupation was unfavorable and that, generally speaking, the first and second nearest neighbor shell Cr occupation was favored with a few exceptions. Kinetic Monte Carlo models at dilute oxygen levels were performed using two models [a kinetically resolved activation (kRA) model and a cluster expansion model for the saddle points]. The models qualitatively agreed with the observed trends in the literature which reported a decrease in diffusivity at dilute Cr levels, but the models predicted different behaviors beyond the dilute Cr limit. Finally, using grand canonical Monte Carlo, we further examined the thermodynamics of oxygen incorporation into the alloy. Furthermore, our results offer new insight into the behavior of oxygen in Fe-Cr alloys that have ramifications on the early stages of the corrosive behavior of the material.
Metal alloys have a wide range of technological applications, from structural materials to catalysts. In many situations, the transport of hydrogen, whether intentionally for hydrogen storage and fuel cell applications or unintentionally in the case of tritium uptake in nuclear materials, is an important concern. Fe-Cr binary alloys, in particular, may be viewed as a simple model system to represent ferritic steels used in nuclear energy systems and, more generally, as a model binary alloy for examining the role of alloying elements on transport. In this work, we used density functional theory, cluster expansion, and kinetic Monte Carlo to study hydrogen kinetics in Fe-Cr alloys. In random homogeneous alloys, we observed that hydrogen diffusivity first decreased with increasing Cr content and then increased to its levels in pure Cr. Furthermore, the effects of heterogeneity, as might be induced by irradiation, were explored and it was concluded that local structural heterogeneities for the same overall Cr concentration may significantly affect the hydrogen diffusivity. The effect was attributed to the relative binding energy of hydrogen in different metals and this understanding was then utilized to predict hydrogen transport behavior in different element-segregated grain/grain boundary combinations and thus identify solute/solvent alloys where hydrogen transport might be either hindered or enhanced. Finally, we comment on the potential impact of radiation-induced segregation on hydrogen behavior in nuclear energy systems.
Atomistic simulations are performed to study the response of Xe gas bubbles in UO 2 to ionizing fission products through the thermal spike approximation. A portion of the total electronic stopping power (S e ) is taken as the thermal spike energy through a ratio variable ζ. The thermal spike energy causes extreme melting within the fission track cylindrical region. Molecular dynamics is employed to quantify the probability of a Xe gas atom to be re-solved (re-dissolved) back into the UO 2 matrix. Subsequently, a re-solution model is developed and parametrized as a function of bubble radius (R), off-centered distance (r), and thermal spike energy (ζS e ). The off-centered distance measures the shift of the thermal spike axis from the bubble center. To evaluate the re-solution model, independent fission product yield of U-235 fission due to thermal neutrons (0.0253 eV), taken from the JEFF-3.3 database, is used. The kinetic energy of the fission products is taken from the EXFOR database. Subsequently, the decay of Se over distance for each fission product is simulated. Finally, the evaluated re-solution rate (re-solution probability per second) is presented as a function of bubble radius for a range of ζ.
In this paper, flash sintering was demonstrated on stoichiometric and non-stoichiometric uranium dioxide pellets at temperatures ranging from room temperature (26°C) up to 600°C. The onset conditions for flash sintering were determined for three stoichiometries (UO 2.00 , UO 2.08 , and UO 2.16 ) and analyzed against an established thermal runaway model. The presence of excess oxygen was found to enhance the flash sintering onset behavior of uranium dioxide, lowering the field required to flash and shortening the time required for a flash to occur. Finally, the results from this study highlight the effect of stoichiometry on the flash sintering behavior of uranium dioxide and will serve as the foundation for future studies on this material.