Search NASA⌕ Search

Engineering topics

Andracchio, C. R.

Publications and source records attributed to Andracchio, C. R..

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Gravity effects on flame spreading over solid surfaces

The effects of gravity on the spreading of a flame over a solid combustible surface were determined. Flame propagation rates were measured from specimens of thin cellulose acetate sheets burning in both normal gravity (1 g) and reduced gravity (0 g) environments; the specimens were burned in various quiescent mixtures of oxygen, helium, argon, and nitrogen. A correlation for normal gravity and reduced gravity burning was obtained based on theoretical models of previous investigators.

Andracchio, C. R.↗
NASA NTRS1974

Burning of solids in oxygen-rich environments in normal and reduced gravity

An experimental program was conducted to investigate the combustion characteristics of solids burning in a weightless environment. The combustion characteristics of thin cellulose acetate material were obtained from specimens burned in supercritical as well as in low pressure oxygen atmospheres. Flame spread rates were measured and found to depend on material thickness and pressure in both normal gravity (1-g) and reduced gravity (0-g). A gravity effect on the burning process was also observed; the ratio of 1-g to 0-g flame spread rate becomes larger with increasing material thickness. Qualitative results on the combustion characteristics of metal screens (stainless steel, Inconel, copper, and aluminum) burning in supercritical oxygen and normal gravity are also presented. Stainless steel (300 sq mesh) was successfully ignited in reduced gravity; no apparent difference in the flame spread pattern was observed between 1-g and 0-g.

Andracchio, C. R.↗
NASA NTRS1974

Forced-convection peak heat flux on cylindrical heaters in water and refrigerant 113

An investigation was conducted of the peak heat flux on cylindrical heaters in a fluid flowing perpendicular to the major axis of the heater. The test fluids were water and Refrigerant 113. Heaters of 0.049 to 0.181 cm diameter were tested over a fluid velocity range of 10.1 to 81.1 cm/sec. The experimental results were observed to fall within two regions based on the vapor removal geometry: jets or sheets. Mathematical models for each region successfully correlated the data for both fluids.

Cochran, T. H.↗
NASA NTRS1972

Effect of baffles on inflow patterns in spherical containers during weightlessness

An experimental investigation of isothermal liquid inflow patterns in a spherical container during weightlessness was conducted in a 2.2-Second Zero-Gravity Facility. The test liquids employed exhibited an essentially zero-degree static contact angle on the surface of the container. Qualitative results are presented for both baffled and unbaffled containers describing the uniformity of tank wall wetting and the liquid loss through two symmetrically located vents.

Labus, T. L.↗