Engineering topics

Angeli, Frédéric

Publications and source records attributed to Angeli, Frédéric.

3 records

DOE OSTI2022

Radiation effects on the structure and alteration behavior of an SiO 2 –Al 2 O 3 –B 2 O 3 –Na 2 O glass

As borosilicate glasses are used in many countries to immobilize fission products and minor actinides after spent fuel reprocessing before storage in a deep geological repository, assessing that their chemical durability is of paramount importance. Here, pristine and preirradiated (952 MeV, 136Xe) SiO 2 –B2O 3 –Al2O 3 –Na 2 O glasses with the same molar ratios as in the French SON68 and ISG glasses have been subjected to aqueous corrosion in deionized water and in silica-saturated solution to measure the initial and longer term alteration rates. Pristine and preirradiated glasses corrode following the same mechanisms, but the preirradiation has a strong impact on the initial dissolution rate (increase by a factor of 5.6), and on the alteration layer depth in silica-saturated conditions (by two- to threefolds). The later result is related to the formation of a more porous, less passivating gel on the preirradiated glass specimen. Using both experimental spectroscopies (NMR, IR, and SFG) and classical molecular dynamics, the radiation effects on the glass structure and water diffusion have been assessed. After preirradiation, the density and the polymerization degree of the glass decrease, whereas the topological disorder increases. In consequence, water diffusion accelerates. These observations allow to correlate the radiation impact on the alteration behavior to the structural changes.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Insights into the mechanisms controlling the residual corrosion rate of borosilicate glasses

Borosilicate glasses are widely used to confine high-level radioactive wastes. The lifetime of these materials could reach hundreds of thousands of years if leaching of the glass into groundwater enables the formation of a passivating gel layer. Even in this regime, the glass will never stop corroding as thermodynamic equilibrium between glass and solution cannot be achieved. Therefore, accurate predictions of glass durability including passivation, require a deep understanding of the mechanisms controlling the so-called residual rate. However, despite tremendous efforts, these mechanisms remain poorly understood. Here, focusing on the behavior of the soluble elements of the International Simple Glass (B, Na, and Ca), we show that the residual rate is controlled by the behavior of B, a glass former supposed to dissolve instantaneously when in contact with water and thus widely considered as an ideal tracer. We then demonstrate that B release is controlled by multiple processes highly dependent on the pH. At the beginning of the passivating layer formation, the hydrolysis of B-O-Si linkages is rate-limiting and has an activation energy of ~60 kJ mol –1 , a value slightly lower than that for breaking Si-O-Si linkages. Once the fraction of closed pores resulting from gel restructuring is high enough, then diffusion of both reactants (water molecules) and some products (mainly B aq , Ca aq ) through the growing gel layer becomes rate-limiting. Consequently, B and Ca accumulate in an inner layer referred to as the active zone, with potential feedback on the B-O-Si hydrolysis. A new paradigm, including B as a key element of the system, is proposed to develop a comprehensive model for the corrosion of borosilicate glass.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Can a simple topological-constraints-based model predict the initial dissolution rate of borosilicate and aluminosilicate glasses?

Tuning glass composition to obtain targeted properties generally relies on empirical approaches. However, a deep understanding of the physical and chemical mechanisms linking glass composition to its structure and properties would enable developing reliable predictive models. Indeed, although empirical models are usually able to interpolate composition–property relationships within a given compositional envelope, they often fail at extrapolating predictions far from their training domain. Here, as an alternative route to empirical models, we show that a structural descriptor based on the number of topological constraints per atom can be used to predict the initial dissolution rate of aluminosilicate and borosilicate glasses after being parameterized on different families of glasses (specific series of borosilicate glasses). Sixteen glasses belonging to these families were studied and their initial dissolution rates were determined at 90 °C and pH 90 °C = 9, covering rates spanning over 5 orders of magnitude. The model based on topological constraints was trained based on seven select borosilicate glasses (R 2 = 0.997) and used to predict the dissolution rate of nine additional borosilicate and aluminosilicate glasses. We show that, provided that corrections are made for high alkali content glasses that dissolve incongruently (preferential release of Na), the model gives reasonable predictions, even far from its training domain.

36 MATERIALS SCIENCE↗