Engineering topics
Publications and source records attributed to Anjan Chakrabarty.
The DJI M600 has been mounted onto a vehicle. With a trail care monitoring from behind, the vehicle completed a journey around the center. This ultimately will lead to the DJI M600 autonomous flight test. Note: Video does not contain sound, run time of 4:23.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
STEReO (Scalable Traffic Management for Emergency Response Operations) project at NASA Ames is designed to provide UTM (UAS Traffic Management) services to unmanned aerial vehicles (UAVs) used for natural disaster response scenarios like wildfire and hurricanes. This will facilitate the use of unmanned aerial vehicles in regions where UAVs are currently prohibited to fly. In this paper we describe a complete architecture of using UAVs for wild fire monitoring in this STEReO environment. We simulate a complete fire monitoring scenario in an high fidelity simulation environment. The simulation consists of a fire drill in the vicinity of Redding airport, one of the test sites for CAL-FIRE. The autonomous vehicle connects to the STEReO systems and gathers information of other operation in the vicinity. The vehicle then uses on-board path planners and decision making algorithms for fire monitoring and mapping. In this paper the vehicle on-board architecture is described in details and the requirements to fly and interact with the STEReO system is discussed.
Explore the source record for details and available documents.
Ocean Worlds Autonomy Testbed for Exploration Research and Simulation (OceanWATERS) is an open-source simulator for developing onboard autonomy software for robotic exploration of ocean worlds, such as Europa, Enceladus, and Titan, built on the Robot Operating System (ROS) and Gazebo simulation environment. Inevitable ground communication delays increase demand for a high degree of autonomy during excavation, collection and transfer of samples to scientific instruments for in-situ analysis. This paper offers a detailed discussion of the robotic arm design and operation for such autonomous surface exploration, taking as reference the Europa Lander mission. The lander arm, which is designed primarily to acquire icy surface and subsurface samples within the arm’s workspace, is a 6-degree-of-freedom manipulator with two end effectors: a sample excavation tool and a trenching end-effector. The robotic arm’s modes and operations can be summarized as follows: stowed arm, intended as the lander arm default configuration characterized by zero-power consumption; un-stowed arm, target arm configuration after its first deployment; selection and deployment of the end-effector to use next; guarded move, to detect ground level at the desired trenching location; drill ice using the grinder; dig trench at a particular location using the scoop; deliver sample to the sample transfer dock; discard redundant samples. The motion planning tool used for the lander arm is MoveIt, a ROS package. MoveIt uses sampling-based planning and collision checking libraries to determine safe paths. The Rapidly Exploring Random Trees* (RRT*) has been chosen as default planning algorithm as it provides optimal plans with an exponential speed and is guaranteed to find a solution, if feasible solutions exist. Furthermore, this work quantifies and discusses the energy requirements for excavating and collecting samples. In OceanWATERS, force feedback from the terrain, which influences the arm dynamics, is modelled using a discrete element method (DEM) simulation. The DEM and Gazebo software run in parallel and communicate through a co-simulation plugin. This paper presents an analysis and comparison of three DEM open source software (YADE, ESyS-Particle, Project Chrono) for implementation in OceanWATERS and motivates the choice of YADE as most suitable candidate.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Simultaneous Localization and Mapping (SLAM) is a promising technique that provides localization information and precise mapping of the physical environment without having much prior knowledge of the surroundings. SLAM may have a vital role in aeronautics and aerospace, where vehicles and aircraft must operate in complex environments with traditional localization services that may be degraded or unavailable. This paper compares several pre-canned 3D SLAM algorithms based on vision and LiDAR, namely ORB-SLAM, ORB-SLAM2, LOAM, A-LOAM, and F-LOAM on NASA UAS (Unmanned Aircraft System) flight test data. The NASA ARC UAS flight test demonstrates preliminary SLAM algorithm results, which serve as a stepping stone to simulated AAM (Advanced Air Mobility) concepts. Conducting AFRC UAS flight test for simulated AAM approach and landing with SLAM algorithms provides an Alternative Precision Navigation and Timing solution based on distributed landmarks and fiducials in the landing zone. These algorithms use the telemetry data as ground truth for a baseline comparison. The criteria of the performance comparison include robustness, accuracy, re-localization, response to environmental changes, and real-time effectiveness, which are currently qualitative but to be quantitative in the future.
Simultaneous Localization and Mapping (SLAM) is a promising technique that provides localization information and precise mapping of the physical environment without having much prior knowledge of the surroundings. SLAM may have a vital role in aeronautics and aerospace, where vehicles and aircraft must operate in complex environments with traditional localization services that may be degraded or unavailable. This paper compares several pre-canned 3D SLAM algorithms based on vision and LiDAR, namely ORB-SLAM, ORB-SLAM2, LOAM, A-LOAM, and F-LOAM on NASA UAS (Unmanned Aircraft System) flight test data. The NASA ARC UAS flight test demonstrates preliminary SLAM algorithm results, which serve as a stepping stone to simulated AAM (Advanced Air Mobility) concepts. Conducting AFRC UAS flight test for simulated AAM approach and landing with SLAM algorithms provides an Alternative Precision Navigation and Timing solution based on distributed landmarks and fiducials in the landing zone. These algorithms use the telemetry data as ground truth for a baseline comparison. The criteria of the performance comparison include robustness, accuracy, re-localization, response to environmental changes, and real-time effectiveness, which are currently qualitative but to be quantitative in the future.