Engineering topics

Anspaugh, Bruce E.

Publications and source records attributed to Anspaugh, Bruce E..

6 records

NASA NTRS2004

Balloon and Lear Jet Testing of Scarlet Modules and Cells

This paper presents test results from SCARLET (Solar Concentrator Array with Refractive Linear Element Technology) experiments performed on several Lewis Research Center Lear jet flights and two JPL balloon flights. The tests were performed in support of the BMDO sponsored SCARLET II program, which is building a 2.6 kW SCARLET solar array to supply the primary power for the JPL New Millennium Deep Space 1 Mission. The experiments involve TECSTAR dual junction GaInP2/GaAs/Ge cells flown bare and under two different types of SCARLET lenses. The two types of lenses tested were a developmental design consisting of monolithic THV fluoroplastic and the current baseline flight design consisting of ceria-doped microsheet and silicone. Measured lens and total module efficiencies are presented and the flight data is compared to various solar simulator test results.

Eskenazi, Michael↗

NASA NTRS1993

Results of some initial space qualification testing on triple junction a-Si and CuInSe2 thin film solar cells

A series of environmental tests were completed on one type of triple junction a-Si and two types of CuInSe2 thin film solar cells. The environmental tests include electron irradiation at energies of 0.7, 1.0, and 2.0 MeV, proton irradiation at energies of 0.115, 0.24, 0.3, 0.5, 1.0, and 3.0 MeV, post-irradiation annealing at temperatures between 20 C and 60 C, long term exposure to air mass zero (AM0) photons, measurement of the cells as a function of temperature and illumination intensity, and contact pull strength tests. As expected, the cells are very resistant to electron and proton irradiation. However, when a selected cell type is exposed to low energy protons designed to penetrate to the junction region, there is evidence of more significant damage. A significant amount of recovery was observed after annealing in several of the cells. However, it is not permanent and durable, but merely a temporary restoration, later nullified with additional irradiation. Contact pull strengths measured on the triple junction a-Si cells averaged 667 grams, and pull strengths measured on the Boeing CuInSe2 cells averaged 880 grams. Significant degradation of all cell types was observed after exposure to a 580 hour photon degradation test, regardless of whether the cells had been unirradiated or irradiated (electrons or protons). Although one cell from one manufacturer lost approximately 60 percent of its power after the photon test, several other cells from this manufacturer did not degrade at all.

Mueller, Robert L.↗

NASA NTRS1993

A Demonstration Plan For Lalser-Beamed Power

In a constrained budgetary era under pressure to develop faster, better, and less expensive space projects, efforts to develop laser-beamed power for lunar and propulsion applications must first focus on defining near-term, commercially attractive deliverables that will demonstrate progress toward, and engender support for development of an operational laser-beamed earth-orbital propulsion/lunar power system.

Laser-Beamed Power↗

NASA NTRS1991

Proton and electron damage coefficients for GaAs/Ge solar cells

A series of electron and proton irradiations of GaAs/Ge solar cells has been carried out for the purpose of deriving radiation damage coefficients for GaAs/Ge solar cells. The electron irradiations were performed at energies of 0.6, 1.0, 2.4, and 12 MeV. The proton irradiation energies used were 0.05, 0.2, 0.3, 0.5, 1.0, 3.0, and 9.5 MeV. I-V characteristics were measured before and after each irradiation. Omnidirectional damage coefficients were calculated for both electrons and protons incident on GaAs/Ge solar cells. The calculations were carried out for infinite backshielding on the cells and for eight different thicknesses of coverglass.

Anspaugh, Bruce E.↗

NASA NTRS1990

Results of the 1990 NASA/JPL balloon flight solar cell calibration program

The 1990 solar cell calibration balloon flight consisted of two flights, one on July 20, 1990 and the other on September 6, 1990. A malfunction occurred during the first flight, which resulted in a complete loss of data and a free fall of the payload from 120,000 ft. After the tracker was rebuilt, and several solar cell modules were replaced, the payload was reflown. The September flight was successful and met all the objectives of the program. Forty-six modules were carried to an altitude of 118,000 ft (36.0 km). Data telemetered from the modules was corrected to 28 C and to 1 a.u. The calibrated cells have been returned to the participants and can now be used as reference standards in simulator testing of cells and arrays.

Anspaugh, Bruce E.↗

NASA NTRS1989

Solar cell radiation handbook. Addendum 1: 1982-1988

The Solar Cell Radiation Handbook (JPL Publication 82-69) is updated. In order to maintain currency of solar cell radiation data, recent solar cell designs have been acquired, irradiated with 1 MeV electrons, and measured. The results of these radiation experiments are reported.

Anspaugh, Bruce E.↗