Engineering topics

Aracne-Ruddle, Chantel

Publications and source records attributed to Aracne-Ruddle, Chantel.

4 records

DOE OSTI2023

Ultrathick Boron Carbide Coatings for Nuclear Fusion Targets

Boron carbide is an attractive ablator for next-generation inertial confinement fusion (ICF) targets. Here we describe several aspects of our ongoing systematic studies of the deposition and processing of B 4 C coatings for ICF targets. We show that residual compressive stress in films can be reduced and the deposition rate increased by N-doping. Further, we also demonstrate successful Si substrate etching and surface polishing and discuss remaining challenges and offer potential solutions to the buildup of particulates in the deposition chamber during prolonged coating runs, control of nodular growth defects, and lateral nonuniformity of film properties for deposition conditions with relatively low target-to-substrate distances.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Ultrathin graphene/polymer laminate films

According to one embodiment, a product includes a composite film comprising a polymer layer directly adjacent a graphene layer. According to another embodiment, a process includes layering a graphene layer onto a polymer layer to form a composite film.

Stadermann, Michael↗

DOE OSTI2021

Liquid-free covalent reinforcement of carbon nanotube dry-spun yarns and free-standing sheets

Carbon nanotubes (CNTs) possess exceptional mechanical properties, surpassing stiffness and strength metrics of common materials such as steel alloys by 100× at the nanoscale. However, when myriads of individual CNTs are bundled together into macroscopic ensembles like fibers or sheets, the result is a 100-fold drop in strength compared to its individual components. Here we present a general strategy aimed to close this gap in property scaling. By using vapor-phase polymerization of a crosslinkable polymer, we reinforced the weak interlinkages among individual CNTs within both yarns and sheets to promote a better transference of mechanical load across the structure. Furthermore, after the treatment, dry-spun, low-density 2.3 μm thin yarns increased their elastic moduli by at least 300%, and free-standing CNT sheets exhibited a 10× boost. In-situ synchrotron small-angle X-ray scattering revealed that polymer-reinforced yarns undergo limited CNT bundle rearrangement when subjected to tensile loads compared to pristine yarns. This evidence supports the hypothesis that the polymer hinders CNTs slippage, the root cause of the poor scaling of mechanical properties in these materials. While we demonstrated this reinforcement method for CNT structures, it is not specific to CNTs and could be used in a wide variety of other hierarchical nanostructured ensembles.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Preparation of large ultrathin free-standing polymer films

A method of making large ultrathin free-standing polymer films without use of a sacrificial layer includes the steps of providing a substrate, applying a polyelectrolyte material to said substrate, applying a polymer material onto said substrate and onto said polyelectrolyte material, and directly delaminating said polymer material from said substrate and said polyelectrolyte to produce the ultrathin free-standing polymer film.

Stadermann, Michael↗