Search NASA⌕ Search

Engineering topics

Arey, Bruce W

Publications and source records attributed to Arey, Bruce W.

At least 19 records

Structure And Radiation Damage Behavior Of Epitaxial CrxMo1-x Alloy Thin Films On MgO

Phenomena related to the interaction of point defects and dopants with grain boundaries and interfaces have been very well documented. However, a quantitative understanding of such an interaction is still missing. In this paper we explore the correlation between radiation damage and interface structure. In doing so, CrxMo1-x(001) films of thickness ~100 nm were epitaxially grown on MgO (001) using molecular beam epitaxy. The interface dislocation density can be systematically varied by controlling the composition of the film. This system allows us to probe the response of the defects generated during the irradiation to the interface dislocation density. The microstructural features of these films before and after irradiation are carefully studied using high resolution scanning/transmission electron microscopy and electron diffraction. It has been found that the film/substrate system is very resistant to ion-induced irradiation damage. No visible point defect clusters, dislocation network or amorphization has been identified, which is contrasted with other materials of either metallic or ionic bonding. We conclude that the defects in the present system appear to be either sub-microscopic and highly dispersed or are annihilated during the irradiation process. Further detailed work is needed to identify the spatial distribution of the defects.

Environmental Molecular Sciences Laboratory↗

Identification of Fragile Microscopic Structures during Mineral Transformations in Wet Supercritical CO2

In this study we examine the nature of highly fragile reaction products that form in low water content super critical carbon dioxide (scCO2) using a combination of scanning electron microscopy/focus ion beam (SEM/FIB), confocal Raman spectroscopy, helium ion microscopy (HeIM), and transmission electron microscopy (TEM). HeIM images show these precipitates to be fragile rosettes that can readily decompose even under slight heating from an electron beam. Using the TEM revealed details on the interfacial structure between the newly formed surface precipitates and the underlying initial solid phases. The detailed microscopic analysis revealed that the growth of the precipitates either followed a tip growth mechanism with precipitates forming directly on the forsterite surface if the initial solid was non-porous (natural forsterite) or growth from the surface of the precipitates where fluid was conducted through the porous (nanoforsterite) agglomerates to the growth center. The mechanism of formation of the hydrated/hydroxylated magnesium carbonate compound (HHMC) phases offers insight into the possible mechanisms of carbonate mineral formation from scCO2 solutions which has recently received a great deal of attention as the result of the potential for CO2 to act as an atmospheric greenhouse gas and impact overall global warming. The techniques used here to examine these fragile structures an also be used to examine a wide range of fragile material surfaces. SEM and FIB technologies have now been brought together in a single instrument, which represents a powerful combination for the studies in biological, geological and materials science.

carbon↗

Fayalite Dissolution and Siderite Formation in Water-Saturated Supercritical CO2

Olivines, a significant constituent of basaltic rocks, have the potential to immobilize permanently CO2 after it is injected in the deep subsurface, due to carbonation reactions occurring between CO2 and the host rock. To investigate the reactions of fayalitic olivine with supercritical CO2 (scCO2) and formation of mineral carbonates, experiments were conducted at temperatures of 35 °C to 80 °C, 90 atm pressure and anoxic conditions. For every temperature, the dissolution of fayalite was examined both in the presence of liquid water and H2O-saturated scCO2. The experiments were conducted in a high pressure batch reactor at reaction time extending up to 85 days. The newly formed products were characterized using a comprehensive suite of bulk and surface characterization techniques X-ray diffraction, Transmission/Emission Mössbauer Spectroscopy, Scanning Electron Microscopy coupled with Focused Ion Beam, and High Resolution Transmission Electron Microscopy. Siderite with rhombohedral morphology was formed at 35 °C, 50 °C, and 80 °C in the presence of liquid water and scCO2. In H2O-saturated scCO2, the formation of siderite was confirmed only at high temperature (80 °C). Characterization of reacted samples in H2O-saturated scCO2 with high resolution TEM indicated that siderite formation initiated inside voids created during the initial steps of fayalite dissolution. Later stages of fayalite dissolution result in the formation of siderite in layered vertical structures, columns or pyramids with a rhombus base morphology.

Environmental Molecular Sciences Laboratory↗

Carbon dioxide-assisted fabrication of highly uniform submicron-sized colloidal carbon spheres via hydrothermal carbonization using soft drink

An eco-friendly and economical method for the formation of uniform-sized carbon spheres by hydrothermal dehydration/condensation of a commercial carbonated beverage at 200 oC is reported. CO2 dissolved in the beverage accelerates the dehydration kinetics of the dissolved sugar molecules leading to production of homogeneous carbon spheres having a diameter less than 850 nm. In the presence of CO2, the rough surface of these carbon spheres likely results from continuous Ostwald ripening of constituent microscopic carbon-containing spheres that are formed by subsequent polymerization of intermediate HMF molecules.

beverage↗

Pertechnetate (TcO4-) reduction by reactive ferrous iron forms in naturally anoxic, redox transition zone sediments from the Hanford Site, USA

Technetium is an important environmental contaminant introduced by the processing and disposal of irradiated nuclear fuel and atmospheric nuclear tests. Under oxic conditions technetium is soluble and exists as pertechnatate anion (TcO4-), while under anoxic conditions Tc is usually insoluble and exists as precipitated Tc(IV). Here we investigated abiotic Tc(VII) reduction in mineralogically heterogeneous, Fe(II)-containing sediments. The sediments were collected from a 55 m borehole that sampled a semi-confined aquifer at the Hanford Site, USA that contained a dramatic redox transition zone. One oxic facies (18.0-18.3 m) and five anoxic facies (18.3-18.6 m, 30.8-31.1 m, 39.0-39.3 m, 47.2-47.5 m and 51.5-51.8 m) were selected for this study. Chemical extractions, X-ray diffraction, electron microscopy, and Mössbauer spectroscopy were applied to characterize the Fe(II) mineral suite that included: Fe(II)-phyllosilicates, pyrite, magnetite and siderite. The Fe(II) mineral phase distribution differed between the sediments. Sediment suspensions were adjusted to the same 0.5 M HCl extracted Fe(II) concentration (0.6 mM) for Tc(VII) reduction experiments. Aqueous Fe was low in all sediment suspensions (<2 μM) and below the Fe(II)aq detection limit (10 μM). Technetium(VII) reduction occurred in all anoxic sediments at depths greater than 18.3 m and reaction time differed significantly between the sediments (8-219 d). Mössbauer analysis of the Tc-reacted, 30.8-31.1 m sediment confirmed that Tc(VII) was reduced by solid-phase Fe(II), with siderite and Fe(II)-containing phyllosilicates implicated as redox reactive phases. Technetium-XAS analysis demonstrated that Tc associated with sediments was in the Tc(IV) valence state and immobilized as clusters of a TcO2·nH2O-like phase. The speciation of redox product Tc(IV) was not affected by reduction rate or Fe(II) mineralogy.

Environmental Molecular Sciences Laboratory↗

Reaction of Water-Saturated Supercritical CO2 with Forsterite: Evidence for Magnesite Formation at Low Temperatures

The nature of the reaction products that form on the surfaces of nanometer-sized forsterite particles during reaction with H2O saturated supercritical CO2 (scCO2) at 35 C and 50 C were examined under in situ conditions and ex situ following reaction. The in situ analysis was conducted by X-ray diffraction (XRD). Ex situ analysis consisted of scanning electron microscopy (SEM) examination of the surface phases and chemical characterization of precipitates using a combination of confocal Raman spectroscopy, 13C and 29Si NMR spectroscopy, and energy-dispersive X-ray Spectroscopy (EDS). The results show that the forsterite surface is highly reactive with the primary reaction products being a mixture of nesquehonite (MgCO3.3H2O) and magnesite (MgCO3) at short reaction times ({approx}3-4 days) and then magnesite (MgCO3) and a highly porous amorphous silica phase at longer reaction times (14 days). After 14 days of reaction most of the original forsterite transformed to reaction products. Importantly, the formation of magnesite was observed at temperatures much lower (35 C) than previously thought needed to overcome its well known sluggish precipitation kinetics. The conversion of nesquehonite to magnesite liberates H2O which can potentially facilitate further metal carbonation, as postulated by previous investigators, based upon studies at higher temperature (80 C). The observation that magnesite can form at lower temperatures implies that water recycling may also be important in determining the rate and extent of mineral carbonation in a wide range of potential CO2 storage reservoirs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superlattice Structure and Precipitates in O+ and Zr+ Ion Coimplanted SrTiO3: a Model Waste Form for 90Sr

We investigate strontium titanate as a model waste form for 90Sr. Implantation with O+ and Zr+ ions, followed by annealing at 1423 K, was performed to simulate 90Sr to 90Zr decays. At low Zr concentrations, we observe formation of a ZrO-Sr superlattice structure. Ab initio calculations indicate that this atomic configuration is energetically favorable. At higher Zr concentrations, we observe precipitates of ZrO2 with a coherently strained interface, or a monolayer of disordered interfacial structure. Potential candidacy of 90SrTiO3 as a waste form for permanent disposal of 90Sr is discussed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Pb nanowire formation on Al/lead zirconate titanate surfaces in high-pressure hydrogen

Thin films of Al on lead zirconate titanate (PZT) annealed in high-pressure hydrogen at 100C exhibit surface Pb nanowire growth. Wire diameter is approximately 80 nm and length can exceed 100 microns. Based on microstructural analysis using electron microscopy and ion scattering, a vapor-solid scheme with hydrogen as a carrier gas was proposed as a growth mechanism. We expect that these observations may lead to controlled Pb nanowires growth through pattering of the Al film.

36 MATERIALS SCIENCE↗

Characterization of Nanoporous WO3 Films Grown via Ballistic Deposition

We report on the preparation and characterization of high surface area, supported nanoporous tungsten oxide films prepared under different conditions on polished polycrystalline Ta and Pt(111) substrates via direct sublimation of monodispersed gas phase of cyclic (WO3)3 clusters. Scanning Electron Microscopy and Transmission Electron Microscopy were used to investigate the film morphology on a nanometer scale. The films consist of arrays of separated filaments that are amorphous. The chemical composition and the thermal stability of the films were investigated by means of X-ray Photoelectron Spectroscopy. The surface area and the distribution of binding sites on the films are measured as functions of growth temperature, deposition angle, and annealing conditions using temperature programmed desorption of Kr. Films deposited at 20 K and at an incident angle of 65{sup o} from substrate normal display the greatest specific surface area of {approx}560 m2/g.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three-dimensional Chemical Imaging of Embedded Nanoparticles using Atom Probe Tomography

Analysis of nanoparticles is often challenging especially when they are embedded in a matrix. Hence, we have used laser-assisted atom probe tomography (APT) to analyze the Au-nanoclusters synthesized in situ using ion beam implantation in single crystal MgO matrix. APT analysis along with scanning transmission electron microscopy and energy dispersive spectroscopy (STEM-EDS) indicated that the nanoparticles have an average size ~ 8 - 12 nm. While it is difficult to analyze the composition of individual nanoparticles using STEM, APT analysis can give three dimensional compositions of the same. It was shown that the maximum Au-concentration in the nanoparticles increases with increasing particle size, with a maximum Au-concentration of up to 50%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanospecific Inhibition of Pyoverdine Siderophore Production in Pseudomonas Chlororaphis O6 by CuO Nanoparticles

As traditional antibiotics become less effective against a growing number of pathogens, engineered nanoparticles (NPs) are becoming more widely applied as biocides. NPs of Ag, ZnO, and CuO exhibit dose-dependent antimicrobial activity; however, information is scant on the impact of sublethal levels of NPs on bacteria. In this paper, we evaluated the effect of a sublethal concentration (200 mg/L) of commercial CuO NPs on the expression of genes involved in the production of the fluorescent siderophore, pyoverdine (PVD) in the plant-beneficial bacterium Pseudomonas chlororaphis O6. PVDs are important in microbe-microbe and microbe-plant interactions, and are a virulence factor in pathogenic pseudomonads. Cells challenged with the NPs had reduced amounts of PVD in their periplasm and the external medium. The NPs impaired the expression of genes involved in transport of the PVD precursor through the plasmamembrane, PVD maturation in the periplasm, and export through the outer membrane. Also, expression from one of three predicted Fe-PVD receptors was reduced by the NPs. As these effects were not observed for cells challenged with copper ions, this is a nanoparticlespecific phenomenon mediating cellular reprogramming in bacteria, affecting secondary metabolism and thus associated critical microbial processes. The regulation of bacterial genes and secondary metabolites by sublethal doses of a common metal oxide NP has strong environmental and medical implications.

59 BASIC BIOLOGICAL SCIENCES↗

Heterogeneous Reduction of U6+ by Structural Fe2+ From Theory and Experiment

Computational and experimental studies were performed to explore heterogeneous reduction of U6+ by structural Fe2+ at magnetite (Fe3O4) surfaces. Molecular Fe-Fe-U models representing a uranyl species adsorbed in a biatomic bidentate fashion to an iron surface group were constructed. Various possible charge distributions in this model surface complex were evaluated in terms of their relative stabilities and electron exchange rates using ab initio molecular orbital methods. Freshly-cleaved, single crystals of magnetite with different initial Fe2+/Fe3+ ratios were exposed to uranyl-nitrate solution (pH ~ 4) for 90 hours. X ray photoelectron spectroscopy and electron microscopy indicated the presence of a mixed U6+/U5+ precipitate heterogeneously nucleated and grown on stoichiometric magnetite surfaces, but only the presence of sorbed U6+ and no precipitate on sub-stoichiometric magnetite surfaces. Calculated electron transfer rates indicate that sequential multi-electron uranium reduction is not kinetically limited by conductive electron resupply to the adsorption site. Both theory and experiment point to local structural Fe2+ density and sterically accessible uranium coordination environments as key controls on uranium reduction extent and rate. Uranium incorporation in solid phases where its coordination is constrained to the 6-fold uranate type should widen the stability field of U5+ relative to U6+. If uranium cannot acquire 8 fold coordination then reduction may proceed to U5+ but not necessarily U4+.

58 GEOSCIENCES↗

The Mineralogic Transformation of Ferrihydrite Induced by Heterogeneous Reaction with Bioreduced Anthraquinone Disulfonate (AQDS) and the Role of Phosphate

Anthraquinone-2-6-disulfonate (AQDS) enhances electron donor utilization and mineral product crystallization in studies of Fe(III) oxide reductive mineralization by metal reducing bacteria (MRB) through heterogeneous redox reaction. In spite of the strong effect of AQDS in these systems, little information exits on its direct role in reductive mineralization. To provide such insights, bioreduced AQDS (AH2DS; dihydro-anthraquinone) was reacted with a 2-line, Si-substituted ferrihydrite under anoxic conditions at neutral pH in PIPES buffer. Phosphate (P) and bicarbonate (C); common adsorptive oxyanions and media/buffer components known to effect ferrihydrite mineralization; and Fe(II)aq (as a catalytic mineralization agent) were used in comparative experiments. Heterogeneous AH2DS oxidation coupled with Fe(III) reduction occurred within 0.13-1 day, with mineralogic transformation occurring thereafter. The product suite included lepidocrocite, goethite, and/or magnetite, with proportions varing with reductant:oxidant ratio (r:o) and the presence of P or C. Lepidocrocite was the primary product at low r:o in the absence of P or C, with evidence for multiple formation pathways. P inhibited reductive recrystallization, while C promoted goethite formation. Stoichiometric magnetite was the sole product at higher r:o in the absence and presence of P. Lepidocrocite was the primary mineralization product in the Fe(II)aq system, with magnetite observed at near equal amounts when Fe(II) was high [Fe(II)/Fe(III)]=0.5 and P was absent. P had a greater effect on reductive mineralization in the Fe(II)aq system, while AQDS was more effective than Fe(II)aq in promoting magnetite formation. The direct AH2DS-driven reductive reaction pathway produced mineral products that were different from AH2DS-ferrihydite-MRB systems, particularly in presence of P.

58 GEOSCIENCES↗

Investigation of Mineral Transformations in Wet Supercritical CO2 by Electron Microscopy

The capture and storage of carbon dioxide and other greenhouse gases in deep geologic formations represents one of the most promising options for mitigating the impacts of greenhouse gases on global warming. In this regard, mineral-fluid interactions are of prime importance since such reactions can result in the long term sequestration of CO2 by trapping in mineral phases. Recently it has been recognized that interactions with neat to water-saturated non-aqueous fluids are of prime importance in understanding mineralization reactions since the introduced CO2 is likely to contain water initially or soon after injection and the supercritical CO2 (scCO2) is less dense than the aqueous phase which can result in a buoyant scCO2 plume contacting the isolating caprock. As a result, unraveling the molecular/microscopic mechanisms of mineral transformation in neat to water saturated scCO2 has taken on an added important. In this study, we are examining the interfacial reactions of the olivine mineral forsterite (Mg2SiO4) over a range of water contents up to and including complete water saturation in scCO2. The surface precipitates that form on the reacted forsterite grains are extremely fragile and difficult to experimentally characterize. In order to address this issue we have developed experimental protocols for preparing and imaging electron-transparent samples from fragile structures. These electron-transparent samples are then examined using a combination of STEM/EDX, FIB-TEM, and helium ion microscope (HIM) imaging (Figures 1-3). This combination of capabilities has provided unique insight into the geochemical processes that occur on scCO2 reacted mineral surfaces. The experimental procedures and protocols that have been developed also have useful applications for examining fragile structures on a wide variety of materials. This research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research located at Pacific Northwest National Laboratory.

CO2↗

Quietly Building Capabilities: New Instruments, Expertise, "Quiet Wing" Available at DOE User Facility

This feature article is prepared for publication in Microscopy Today. The goal is to communicate the value of the Quiet Wing, EMSL’s growing microscopy capability, and the science they enable to the microscopy community and hopefully various related research communities (e.g. catalysis, etc.). The secondary goals are to demonstrate EMSL’s leadership in microscopy and show our DOE client we are making excellent use of ARRA and other investments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Subsurface Examination of a Foliar Biofilm Using Scanning Electron- and Focused-Ion-Beam Microscopy

The dual beam scanning electron microscope, equipped with both a focused ion- and scanning electron- beam (FIB SEM) is a novel tool for the exploration of the subsurface structure of biological tissues. The FIB can remove a predetermined amount of material from a selected site to allow for subsurface exploration and when coupled with SEM or scanning ion- beam microscopy (SIM) could be suitable to examine the subsurface structure of bacterial biofilms on the leaf surface. The suitability of chemical and cryofixation was examined for use with the FIB SEM to examine bacterial biofilms on leaf surfaces. The biological control agent, Burkholderia pyroccinia FP62, that rapidly colonizes the leaf surface and forms biofilms, was inoculated onto geranium leaves and incubated in a greenhouse for 7 or 14 days. Cryofixation was not suitable for examination of leaf biofilms because it created a frozen layer over the leaf surface that cracked when exposed to the electron beam and the protective cap required for FIB milling could not be accurately deposited. With chemically fixed samples, it was possible to precisely FIB mill a single cross section (5 µm) or sequential cross sections from a single site without any damage to the surrounding surface. Biofilms, 7 days post-inoculation (DPI), were composed of 2 to 5 bacterial cell layers while biofilms 14 DPI ranged from 5 to greater than 30 cell layers. Empty spaces between bacteria cells in the subsurface structure were observed in biofilms 7- and 14-DPI. Sequential cross sections inferred that the empty spaces were often continuous between FP62 cells and could possibly make up a network of channels throughout the biofilm. FIB SEM was a useful tool to observe the subsurface composition of a foliar biofilm.

54 ENVIRONMENTAL SCIENCES↗

Investigation of Cellular Interactions of Nanoparticles by Helium Ion Microscopy

The helium ion mircroscope (HIM) probes light elements (e.g. C, N, O, P) with high contrast due to the large variation in secondary electron yield, which minimizes the necessity of specimen staining. A defining characteristic of HIM is its remarkable capability to neutralize charge by the implementation of an electron flood gun, which eliminates the need for coating non-conductive specimens for imaging at high resolution. In addition, the small convergence angle in HeIM offers a large depth of field (~5x FE-SEM), enabling tall structures to be viewed in focus within a single image. Taking advantage of these capabilities, we investigate the interactions of engineered nanoparticles (NPs) at the surface of alveolar type II epithelial cells grown at the air-liquid interface (ALI). The increasing use of nanomaterials in a wide range of commercial applications has the potential to increase human exposure to these materials, but the impact of such exposure on human health is still unclear. One of the main routs of exposure is the respiratory tract, where alveolar epithelial cells present a vulnerable target at the interface with ambient air. Since the cellular interactions of NPs govern the cellular response and ultimately determine the impact on human health, our studies will help delineating relationships between particle properties and cellular interactions and response to better evaluate NP toxicity or biocompatibility. The Rutherford backscattered ion (RBI) is a helium ions imaging mode, which backscatters helium ions from every element except hydrogen, with a backscatter yield that depends on the atomic number of the target. Energy-sensitive backscatter analysis is being developed, which when combined with RBI image information, supports elemental identification at helium ion nanometer resolution. This capability will enable distinguishing NPs from cell surface structures with nanometer resolution.

08 HYDROGEN↗