Search NASA⌕ Search

Engineering topics

Arnold, J. O.

Publications and source records attributed to Arnold, J. O..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Using Information from Rendezvous Missions For Best-Case Appraisals of Impact Damage to Planet Earth Caused By Natural Objects

The Asteroid Threat Assessment Project (ATAP), a part of NASAs Planetary Defense Coordination Office (PDCO) has the responsibility to appraise the range of surface damage by potential asteroid impacts on land or water. If a threat is realized, the project will provide appraisals to officials empowered to make decisions on potential mitigation actions. This paper describes a scenario for assessment of surface damage when characterization of an asteroid had been accomplished by a rendezvous mission that would be conducted by the international planetary defense community. It is shown that the combination of data from ground and in-situ measurements on an asteroid provides knowledge that can be used to pin-point its impact location and predict the level of devastation it would cause. The hypothetical asteroid 2017 PDC with a size of 160 to 290 m in diameter to be discussed at the PDC 2017 meeting is used as an example. In order of importance for appraising potential damage, information required is: (1) where will the surface impact occur? (2) What is the mass, shape and size of the asteroid and what is its entry state (speed and entry angle) at the 100 km atmospheric pierce point? And (3) is the asteroid a monolith or a rubble pile? If it is a rubble pile, what is its sub and interior structure? Item (1) is of first order importance to determine levels of devastation (loss of life and infrastructure damage) because it varies strongly on the impact location. Items (2) and (3) are used as input for ATAPs simulations to define the level of surface hazards: winds, overpressure, thermal exposure; all created by the deposition of energy during the objects atmospheric flight, andor cratering. Topics presented in this paper include: (i) The devastation predicted by 2017 PDCs impact based on initial observations using ATAPs risk assessment capability, (ii) How information corresponding to items (1) to (3) could be obtained from a rendezvous mission, and (iii) How information from a rendezvous mission could be used, along with that from ground observations and data from the literature, could provide input for an new risk analysis capability that is emerging from ATAPs research. It is concluded that this approach would result in appraisal with the least uncertainty possible (herein called the best-case) using simulation capabilities that are currently available or will be in the future.

Arnold, J. O.↗
NASA NTRS2015

Analysis of Potentially Hazardous Asteroids

The National Aeronautics and Space Administration initiated a new project focused on Planetary Defense on October 1, 2014. The new project is funded by NASAs Near Earth Object Program (Lindley Johnson, Program Executive). This presentation describes the objectives, functions and plans of four tasks encompassed in the new project and their inter-relations. Additionally, this project provides for outreach to facilitate partnerships with other organizations to help meet the objectives of the planetary defense community. The four tasks are (1) Characterization of Near Earth Asteroids, (2) Physics-Based Modeling of Meteor Entry and Breakup (3) Surface Impact Modeling and (4) Physics-Based Impact Risk Assessment.

Asteroids↗
NASA NTRS2015

Overview of a New NASA Activity Focused on Planetary Defense

The National Aeronautics and Space Administration (NASA) has initiated a new Planetary Defense research activity, led by the NASA Ames Research Center. The objective of the effort is to provide tools for reliably assessing the impact damage that Potentially Hazardous Asteroids (PHAs) could inflict on the Earth. This research will support decisions regarding appropriate mitigation action in the event that an impact threat is discovered. The activity includes four interrelated tasks: PHA characterization, physics-based simulations of atmospheric entry/breakup, simulations of surface damage due to airbursts, land impacts, or tsunamis, and an integrated assessment of the overall risks posed by potential PHA strikes. This paper outlines the objectives, research approaches, products, and interrelations of the activity’s four tasks, and presents an overview of their current progress and preliminary results. Companion papers in this conference provide additional details of the work in the four task areas.

Arnold, J. O.↗
NASA NTRS2015

Overview of a New NASA Activity Focused on Planetary Defense

The National Aeronautics and Space Administration (NASA) has initiated a new Planetary Defense research activity, led by the NASA Ames Research Center. The objective of the effort is to provide tools for reliably assessing the impact damage that Potentially Hazardous Asteroids (PHAs) could inflict on the Earth. This research will support decisions regarding appropriate mitigation action in the event that an impact threat is discovered. The activity includes four interrelated tasks: PHA characterization, physics-based simulations of atmospheric entry breakup, simulations of surface damage due to airbursts, land impacts, or tsunamis, and an integrated assessment of the overall risks posed by potential PHA strikes. This paper outlines the objectives, research approaches, products, and interrelations of the activity's four tasks, and presents an overview of their current progress and preliminary results. Companion papers in this conference provide additional details of the work in the four task areas.

Arnold, J. O.↗
NASA NTRS2005

A Survey of the Rapidly Emerging Field of Nanotechnology: Potential Applications for Scientific Instruments and Technologies for Atmospheric Entry Probes

The field of Nanotechnology is well funded worldwide and innovations applicable to Solar System Exploration are emerging much more rapidly than thought possible just a few years ago. This presentation will survey recent innovations from nanotechnololgy with a focus on novel applications to atmospheric entry science and probe technology, in a fashion similar to that presented by Arnold and Venkatapathy at the previous workshop forum at Lisbon Portugal, October 6-9, 2003. Nanotechnology is a rapidly emerging field that builds systems, devices and materials from the bottom up, atom by atom, and in so doing provides them with novel and remarkable macro-scale performance. This technology has the potential to revolutionize space exploration by reducing mass and simultaneously increasing capability. Thermal, Radiation, Impact Protective Shields: Atmospheric probes and humans on long duration deep space missions involved in Solar System Exploration must safely endure 3 significant hazards: (i) atmospheric entry; (ii) radiation; and (iii) micrometeorite or debris impact. Nanostructured materials could be developed to address all three hazards with a single protective shield, which would involve much less mass than a traditional approach. The concept can be ready in time for incorporation into NASA s Crew Exploration Vehicle, and possible entry probes to fly on the Jupiter Icy Moons

Meyyappan, M.↗
NASA NTRS2005

Could Nano-Structured Materials Enable the Improved Pressure Vessels for Deep Atmospheric Probes?

A viewgraph presentation on the use of Nano-Structured Materials to enable pressure vessel structures for deep atmospheric probes is shown. The topics include: 1) High Temperature/Pressure in Key X-Environments; 2) The Case for Use of Nano-Structured Materials Pressure Vessel Design; 3) Carbon based Nanomaterials; 4) Nanotube production & purification; 5) Nanomechanics of Carbon Nanotubes; 6) CNT-composites: Example (Polymer); 7) Effect of Loading sequence on Composite with 8% by volume; 8) Models for Particulate Reinforced Composites; 9) Fullerene/Ti Composite for High Strength-Insulating Layer; 10) Fullerene/Epoxy Composite for High Strength-Insulating Layer; 11) Models for Continuous Fiber Reinforced Composites; 12) Tensile Strength for Discontinuous Fiber Composite; 13) Ti + SWNT Composites: Thermal/Mechanical; 14) Ti + SWNT Composites: Tensile Strength; and 15) Nano-structured Shell for Pressure Vessels.

Srivastava, D.↗
NASA NTRS2005

Nanostructured Thermal Protection Systems for Space Exploration Missions

Strong research and development programs in nanotechnology and Thermal Protection Systems (TPS) exist at NASA Ames. Conceptual studies have been undertaken to determine if new, nanostructured materials (composites of existing TPS materials and nanostructured composite fibers) could improve the performance of TPS. To this end, we have studied various candidate heatshields, some composed of existing TPS materials (with known material properties), to provide a baseline for comparison with others that are admixtures of such materials and a nanostructured material. In the latter case, some assumptions were made about the thermal conductivity and strength of the admixture, relative to the baseline TPS material. For the purposes of this study, we have made the conservative assumption that only a small fraction of the remarkable properties of carbon nanotubes (for example) will be realized in the material properties of the admixtures employing them. The heatshields studied included those for Sharp leading edges (appropriate to out-of-orbit entry and aero-maneuvering), probes, an out-of-orbit Apollo Command Module (as a surrogate for NASA's new Crew Exploration Vehicle [CEV]), a Mars Sample Return Vehicle and a large heat shield for Mars aerocapture missions. We report on these conceptual studies, which show that in some cases (not all), significant improvements in the TPS can be achieved through the use of nanostructured materials.

Arnold, J. O.↗
NASA NTRS1998

Langmuir Probe Measurements in an Inductively Coupled GEC Reference Cell Plasma

Measurements of electron number density, electron temperature, and electron energy distribution function (EEDF) using a compensated Langmuir probe have been performed on an inductively (transformer ) coupled Gaseous Electronics Conference (GEC) reference cell plasma. The plasma source is operated with CH4, CF4, or their mixtures with argon. The effect of independently driving the electrode supporting the wafer on the probe data is studied. In particular, we find that the plasma structure depends on the phase in addition to the magnitude of the power coupled to the electrode relative to that of the transformer coil. The Langmuir probe is translated in a plane parallel to the electrode to investigate the spatial structure of the plasma. The probe data is also compared with fluid model predictions.

Ji, J. S.↗
NASA NTRS1998

In situ CF3 Detection in Low Pressure Inductive Discharges by Fourier Transform Infrared Spectroscopy

The detection of CF(x) (x=1-3) radicals in low pressure discharges using source gases such as CF4 and CHF3 is of importance to the understanding of their chemical structure and relevance in plasma based etching processes. These radicals are known to contribute to the formation of fluorocarbon polymer films, which affect the selectivity and anisotropy of etching. In this study, we present preliminary results of the quantitative measurement of trifluoromethyl radicals, CF3, in low pressure discharges. The discharge studied here is an inductively (transformer) coupled plasma (ICP) source in the GEC reference cell, operating on pure CF4 at pressures ranging from 10 - 100 mTorr, This plasma source generates higher electron number densities at lower operating pressures than obtainable with the parallel-plate capacitively coupled version of the GEC reference cell. Also, this expanded operating regime is more relevant to new generations of industrial plasma reactors being used by the microelectronics industry. Fourier transform infrared (FTIR) spectroscopy is employed to observe the absorption band of CF3 radicals in the electronic ground state X2Al in the region of 1233-1270/cm. The spectrometer is equipped with a high sensitivity HgCdTe (MCT) detector and has a fixed resolution of 0.125/cm. The CF3 concentrations are measured for a range of operating pressures and discharge power levels.

Kim, J. S.↗
NASA NTRS1998

A Computational Chemistry Database for Semiconductor Processing

The concept of 'virtual reactor' or 'virtual prototyping' has received much attention recently in the semiconductor industry. Commercial codes to simulate thermal CVD and plasma processes have become available to aid in equipment and process design efforts, The virtual prototyping effort would go nowhere if codes do not come with a reliable database of chemical and physical properties of gases involved in semiconductor processing. Commercial code vendors have no capabilities to generate such a database, rather leave the task to the user of finding whatever is needed. While individual investigations of interesting chemical systems continue at Universities, there has not been any large scale effort to create a database. In this presentation, we outline our efforts in this area. Our effort focuses on the following five areas: 1. Thermal CVD reaction mechanism and rate constants. 2. Thermochemical properties. 3. Transport properties.4. Electron-molecule collision cross sections. and 5. Gas-surface interactions.

Jaffe, R.↗
NASA NTRS1992

Aerobraking technology for manned space transportation systems

The paper discusses aerobraking technology for manned missions to Mars. Special attention is given to the human and technical parameters that strongly affect the design of aerobrakes and the aerothermodynamic environment which will be encountered during atmospheric passage to Mars, and to the thermal protection technology for aerobrakes, including some recent developments in ablative thermal protection materials. Some results of tests are presented, and recommendations are made for future technology developments in aerobraking.

Arnold, J. O.↗
NASA NTRS1990

The Importance of the Measurement of the Unsteady Wake of the Aeroassist Flight Experiment Vehicle: A White Paper

The High Frequency Radiometer (HFR) is the only instrument on the Aeroassist Flight Experiment (AFE) with sufficient temporal resolution to discern the frequency of unsteady wake oscillations. Determining both the frequency and amplitude of wake unsteadiness during AFE atmospheric entry is essential for reliably predicting the geometry and motion of the wake of future Aeroassisted Space Transfer Vehicles (ASTV). These parameters directly affect the location and size of the pay- load and the weight of the required afterbody heat protection. The purpose of the AFE is to validate the technologies required for the design of ASTVs, which will be used to exploit Earth-lunar space. This validation will be conducted at a combination of vehicle size, altitude, and velocity not obtainable in ground-based facilities. The AFE will provide the experimental flight data needed to improve our understanding of hypersonic-wake physics and to validate computational predictions of the aerodynamic and heating loads, including afterbody radiative heating loads, on an ASTV. Reliable prediction of ASTV wake flows will ensure that payloads are located within the shear-layer envelope and will determine the amount of thermal protection the payloads require. Specifically, understanding the temporal nature of the wake unsteadiness is important for two reasons. Most importantly, analysis of ground-based experiments suggests that wake unsteadiness results in a variation of as much as +/- 5 deg in the shear-flow turning angle. This angle must be reliably predicted to avoid shear-layer impingement on the vehicle afterbody, which would result in heating rates of about 10 W/sq cm, of the same order as on the forebody stagnation point. Secondly, the energy associated with wake unsteadiness will reduce the static enthalpy of the wake fluid and cause an error of as much as 30% in the amount of predicted wake radiative heating. Therefore, the HFR flight data, which will quantify the frequency and amplitude of the wake unsteadiness, are required for the verification of computational models of ASTV flowfields. Measurement of wake unsteadiness has been endorsed by the Peer Science Steering Group and the AFE Computational Fluid Dynamics (CFD) Working Group. The Peer Science Steering Group has stressed that a reliable measurement of the wake unsteadiness is fundamental because incorporating unsteadiness represents a substantial challenge to the CFD community, and a reliable measurement will raise confidence in the computer simulation. The AFE CFD Working Group has stated that 44 any data which would prove the existence and effects of unsteady flow would be extremely valuable.

Strawa, A. W.↗
NASA NTRS1988

The ballistic range and aerothermodynamic testing

A renewed interest in hypervelocity vehicles requires an increase in our knowledge of aerothermodynamic phenomena. Tests conducted in our ground-based facilities can be used both to better understand the physics of hypervelocity flight, and to calibrate and validate computer codes designed to predict vehicle performance in the hypervelocity environment. This paper reviews the requirements for aerothermodynamic testing and discusses the ballistic range and its capabilities. Examples of the kinds of testing performed in typical high-performance ballistic ranges are described; we draw heavily on experience obtained in the ballistics facilities at NASA Ames. Prospects for improving the capabilities of the ballistic range by using advanced instrumentation are discussed. Finally, recent developments in gun technology and their application to extend the capability of the ballistic range are summarized.

Strawa, A. W.↗
NASA NTRS1987

Computational chemistry

With the advent of supercomputers, modern computational chemistry algorithms and codes, a powerful tool was created to help fill NASA's continuing need for information on the properties of matter in hostile or unusual environments. Computational resources provided under the National Aerodynamics Simulator (NAS) program were a cornerstone for recent advancements in this field. Properties of gases, materials, and their interactions can be determined from solutions of the governing equations. In the case of gases, for example, radiative transition probabilites per particle, bond-dissociation energies, and rates of simple chemical reactions can be determined computationally as reliably as from experiment. The data are proving to be quite valuable in providing inputs to real-gas flow simulation codes used to compute aerothermodynamic loads on NASA's aeroassist orbital transfer vehicles and a host of problems related to the National Aerospace Plane Program. Although more approximate, similar solutions can be obtained for ensembles of atoms simulating small particles of materials with and without the presence of gases. Computational chemistry has application in studying catalysis, properties of polymers, all of interest to various NASA missions, including those previously mentioned. In addition to discussing these applications of computational chemistry within NASA, the governing equations and the need for supercomputers for their solution is outlined.

Arnold, J. O.↗
NASA NTRS1986

The Impact of Supercomputers on Experimentation: A View from a National Laboratory

The relative roles of large-scale scientific computers and physical experiments in several science and engineering disciplines are discussed. Increasing dependence on computers is shown to be motivated both by the rapid growth in computer speed and memory, which permits accurate numerical simulation of complex physical phenomena, and by the rapid reduction in the cost of performing a calculation, which makes computation an increasingly, attractive complement to experimentation. Computer speed and memory requirements are presented for selected areas of such disciplines as fluid dynamics, aerodynamics, aerothermodynamics, chemistry, atmospheric sciences, astronomy, and astrophysics, together with some examples of the complementary nature of computation and experiment. Finally the impact of the emerging role of computers in the technical disciplines is discussed in terms of both the requirements for experimentation and the attainment of previously inaccessible information on physical processes.

Peterson, V.L.↗
NASA NTRS1985

The impact of supercomputers on experimentation: A view from a national laboratory

The relative roles of large scale scientific computers and physical experiments in several science and engineering disciplines are discussed. Increasing dependence on computers is shown to be motivated both by the rapid growth in computer speed and memory, which permits accurate numerical simulation of complex physical phenomena, and by the rapid reduction in the cost of performing a calculation, which makes computation an increasingly attractive complement to experimentation. Computer speed and memory requirements are presented for selected areas of such disciplines as fluid dynamics, aerodynamics, aerothermodynamics, chemistry, atmospheric sciences, astronomy, and astrophysics, together with some examples of the complementary nature of computation and experiment. Finally, the impact of the emerging role of computers in the technical disciplines is discussed in terms of both the requirements for experimentation and the attainment of previously inaccessible information on physical processes.

Peterson, V. L.↗
NASA NTRS1985

Radiometer experiment for the aeroassist flight experiment

A forthcoming NASA flight experiment is described that provides an opportunity to obtain a large base of radiometric data for high-altitude, high-velocity thermochemically nonequilibrated-flow conditions. As a preliminary to the design of a radiometer for this experiment, an approximate method for predicting both equilibrium and nonequilibrium radiative surface fluxes is described. Spectral results for one trajectory state, a velocity of 10 km/sec at an altitude of 85 km, are presented. These results are then used to develop some of the instrument parameters that will be needed for designing of the three genre of radiometers that are proposed for this experiment.

Davy, W. C.↗