Search NASASearch

Engineering topics

Aronson, J. R.

Publications and source records attributed to Aronson, J. R..

At least 19 records

Effective optical constants of anisotropic materials

The applicability of a technique for determining the optical constants of soil or aerosol components on the basis of measurements of the reflectance or transmittance of inhomogeneous samples of component material is investigated. Optical constants for a sample of very pure quartzite were obtained by a specular reflection technique and line parameters were calculated by classical dispersion theory. Predictions of the reflectance of powdered quartz were then derived from optical constants measured for the anisotropic quartz and for pure quartz crystals, and compared with experimental measurements. The calculated spectra are found to resemble each other moderately well in shape, however the reflectance level calculated from the psuedo-optical constants (quartzite) is consistently below that calculated from quartz values. The spectrum calculated from the quartz optical constants is also shown to represent the experimental nonrestrahlen features more accurately. It is thus concluded that although optical constants derived from inhomogeneous materials may represent the spectral features of a powdered sample qualitatively a quantitative fit to observed data is not likely.

Aronson, J. R.

Infrared spectra of lunar soils

Measured data obtained by Michelson interferometer spectrometer were stored in a computer file and smoothed by being passed forward and backward through a digital four-pole low pass filter. Infrared spectra of the 10 lunar samples are presented in the format of brightness temperature versus frequency. The mol % of feldspar, pyroxene, olivine, ilmenite and ferromagnetic silicate in each sample is presented in tables. The reflectance spectra of ilmenite and enstatite are shown in graphs.

Aronson, J. R.

Infrared spectra of lunar soils

Lunar sample measurements were made both under ambient nitrogen pressure and under vacuum conditions. Average emittance values were analyzed for a number of samples which were determined to include silicate minerals, pyroxenes, and fine particle feldspar. Information is also provided on modifications made to emittance apparatus in order to work with smaller sample sizes and to prevent accidental loss or contamination of the lunar sample material.

Aronson, J. R.

Mid infrared spectra of lunar and analog soils

The mid infrared emittance spectrum contains compositional information about lunar soils. In order to be able to properly interpret remotely obtained data, it was necessary to develop a theoretical model of the emittance of particulate minerals. This theory was shown to simulate the spectra of analog lunar soils satisfactorily provided that good values of the optical constants of the component minerals were available. Optical constants have been obtained for dunite, bytownite, augite, ilmenite, and a mare glass analog during this work. Our first measurements on lunar soils indicated that 67711 is very immature (high contrast) and is dominated by feldspar; that 10084 shows very low contrast with some evidence of pyroxene and feldspar bands. 71061 is intermediate between the other two having a gross similarity to 10084 but with considerably more contrast.

Aronson, J. R.

Infrared spectra of lunar soil analogs

The infrared spectra of analogs of lunar soils were investigated to further the development of methodology for interpretation of remotely measured infrared spectra of the lunar surface. The optical constants of dunite, bytownite, augite, ilmenite, and a mare glass analog were obtained. The infrared emittance spectra of powdered minerals were measured and compared with spectra calculated by the reflectance theory using a catalog of optical constants. The results indicate that the predictions of the theory closely simulate the experimental measurements if the optical constants are properly derived.

Aronson, J. R.

Composition of the Martian dust as derived by infrared spectroscopy from Mariner 9

The Martian dust spectra obtained by the infrared interferometer spectrometer (Iris) experiment on Mariner 9 have been compared with modeling computations for various minerals and rocks. The model used was based upon a recently developed theory of absorption and scattering by particulate materials. The results indicate that the composition of Martian dust is biased toward silicate structures which involve a high degree of silicate oxygen sharing. A feldspar-rich dust of approximately 1-micron particle size appears to be the best candidate, although sheet-structure silicates cannot be ruled out.

Aronson, J. R.

Optical constants of minerals and rocks

Lorentz line parameters (and estimates of their standard deviations) have been empirically derived from measured reflectance data for muscovite mica, an anorthosite, a diopsidic pyroxenite, an almandite-pyrope garnet, and a soda lime glass. These parameters provide a useful starting point for computer calculations requiring optical constants as a function and are therefore given here. A novel method of fitting the reflectance data by least squares is described in detail, as is the statistical procedure for estimating the standard deviations of the parameters found.

Aronson, J. R.

Techniques for carrying out radiative transfer calculations for the Martian atmospheric dust

A description is given of the modification of a theory on the reflectance of particulate media so as to apply it to analysis of the infrared spectra obtained by the IRIS instrument on Mariner 9. With the aid of this theory and the optical constants of muscovite mica, quartz, andesite, anorthosite, diopside pyroxenite, and dunite, modeling calculations were made to refine previous estimates of the mineralogical composition of the Martian dust particles. These calculations suggest that a feldspar rich mixture is a very likely composition for the dust particles. The optical constants used for anorthosite and diopside pyroxenite were derived during this program from reflectance measurements. Those for the mica were derived from literature reflectance data. Finally, a computer program was written to invert the measured radiance data so as to obtain the absorption coefficient spectrum which should then be independent of the temperature profile and gaseous component effects.

Aronson, J. R.

Spectral reflectance and emittance of particulate materials. I - Theory. II - Application and results

The sizes, shapes, and complex refractive indices of particles are calculated in a study of the IR spectral reflectance of a semiinfinite medium composed of irregular particles of different materials. Geometric optics techniques with corrections for additional absorption due to particle edges and asperities is used in scattering and absorption calculations for particles larger than the wavelength. A Lorentz-Lorenz model is used to derive the averaged complex index of the medium, assuming that its individual particles are ellipsoids. Experimental results obtained on a Michelson interferometer for the spectral emittance of particulate mineral materials are compared with theoretical results. Good agreement between the experimental and theoretical results suggests the applicability, in remote IR spectroscopy, of the theoretical concepts applied in this study.

Emslie, A. G.

The prospects for mineral analysis by remote infrared spectroscopy.

An investigation of the effects of physical parameters on the spectra of minerals has been carried out, and an attempt made to develop a comprehensive theory of the reflectance (or emittance) spectra of particulate surfaces. The theory involves the effects of particle size, surface roughness, porosity, and mixing ratios on the spectra of mineralogical assemblages. The true spectral information is represented by the refractive indices and absorption coefficients of the constituent minerals. The present theory and the Mie theory for a cloud of well separated quartz particles are compared, as well as theoretical and experimental reflectances of quartz powders, glass beads, and corundum powders. Experimental results of abrading sapphire are presented.

Aronson, J. R.

Development of a theory of the spectral reflectance of minerals, part 3

Significant refinements were made in the theory of the diffuse reflectance of particulate media. The theory predicts the opposite trends of reflectance with particle size in regions of the spectrum in which the particles are semi-transparent and those in which they are opaque. Enhanced absorption caused by wave-optical effects of small surface asperities and edges was used to improve the theory. The same mechanism remedies the theory to account for the data in spectral regions of anomalous dispersion.

Aronson, J. R.