Search NASA⌕ Search

Engineering topics

Arpin, Kevin A.

Publications and source records attributed to Arpin, Kevin A..

Scalable assembly of patterned ordered functional micelle arrays: final LDRD report

In this project, we demonstrated the synthesis of polystyrene-polyvinylpyridyne (PS-PVP) micelles, functionalization of these micelles to form organic/inorganic composite nanoparticles, and template directed assembly of dynamic PS-PVP micelles into features defined via soft nanoimprint lithography. We demonstrated unique assembly properties of dynamic micellar nanoparticles by combining a top down lithographic nanopatterning technique with a solution based bottom up self-assembly.

Fan, Hongyou↗

Electrodeposited 3D Tungsten Photonic Crystals with Enhanced Thermal Stability

Tungsten inverse opal photonic crystals were fabricated using a template directed electrodeposition method. The electrodeposition was accomplished using a molten salt solution at elevated temperatures. Following template removal, the tungsten inverse opals were conformally coated with hafnia or alumina via atomic layer deposition. This surface passivation layer increased the thermal stability of the tungsten microarchitectures by limiting surface diffusion. Alumina protected tungsten inverse opals were thermally stable up to 1000 °C for at least 12 h in forming gas (5% H 2 in Ar). Hafnia protected inverse opals were thermally stable up to 1400 °C for at least 12 h in forming gas. We expect that this surface passivation technique can also be implemented to increase the thermal stability of other refractory metal microarchitectures. Furthermore, the demonstrated thermal stability is an important property for the realization of metallic photonic crystals as narrow band emitters for thermophotovoltaics.

36 MATERIALS SCIENCE↗

Template directed assembly of dynamic micellar nanoparticles

The ability to pattern functional nanoparticle arrays in multiple dimensions will enable future devices which exhibit functions that cannot be realized using unstructured nanoparticle arrays. Here we demonstrate the unique assembly properties of dynamic micellar nanoparticles by combining a top down lithographic nanopatterning technique with a solution-based bottom up self-assembly. The templates for the directed self-assembly of the micelles consisted of arrays of cylindrical recess features fabricated by nanoimprint lithography. Silica was coated on this patterned substrate and subsequently selectively functionalized with a positively charged molecular monolayer (N-(3-Trimethoxysilylpropyl) diethylenetriamine) to regulate the micelle-surface interactions. The self-assembled block co-polymer polystyrene-b-poly(4-vinyl pyridine) (PS 480k –PVP 145k ) micelles were approximately 325nm in diameter in aqueous solutions (pH = 2.5) and 50nm in diameter in the dry state. The average number of micelles assembled per feature increased from less than 1 to 12 with increasing feature diameter in the range of 200nm–1μm. Using a 2D model for maximum packing of circles in circular host features, the effective sphere size of the micelles during assembly was calculated to be 250nm in diameter. Thus, the micelles exhibited three characteristic sizes during assembly, 325nm in bulk solution, 250nm during assembly, and 50nm in the dry state. Furthermore, this dramatic variation in nanoparticle volume during the assembly process offers unique opportunities for forming nanometre scale, multidimensional arrays not accessible using hard sphere building blocks.

42 ENGINEERING↗

Interfacial thermal conductance in spun-cast polymer films and polymer brushes

Interfaces between inorganic materials and anharmonic polymers have potentially intriguing thermal transport behavior. Here, the low thermal conductivity of amorphous polymers limits significant interfacial effects to polymer film thicknesses of only a few nanometers. We use time-domain thermoreflectance to directly measure interfacial effects in the thermal conductance of spun-cast poly(methyl methacrylate) (PMMA) thin films and PMMA brushes "grafted-from" the substrate. PMMA brushes are expected to have polymer chains partially aligned perpendicular to the substrate, yet only a modest increase (13%) in thermal conductivity is observed over spun-cast layers.

36 MATERIALS SCIENCE↗

Multidimensional Architectures for Functional Optical Devices

Materials exhibiting multidimensional structure with characteristic lengths ranging from the nanometer to the micrometer scale have extraordinary potential for emerging optical applications based on the regulation of light–matter interactions via the mesoscale organization of matter. As the structural dimensionality increases, the opportunities for controlling light–matter interactions become increasingly diverse and powerful. Furthermore, recent advances in multidimensional structures have been demonstrated that serve as the basis for three-dimensional photonic-bandgap materials, metamaterials, optical cloaks, highly efficient low-cost solar cells, and chemical and biological sensors. In this Review, the state-of-the-art design and fabrication of multidimensional architectures for functional optical devices are covered and the next steps for this important field are described.

36 MATERIALS SCIENCE↗