Engineering topics

Arul Kumar, Mariyappan

Publications and source records attributed to Arul Kumar, Mariyappan.

2 records

DOE OSTI2024

Resolving crystallographic geometrically necessary dislocations in three dimensions in a hexagonal close packed titanium alloy

Abstract Geometrically necessary dislocation (GND) content is measured from mm 3 -scaled Ti7Al three-dimensional (3D) microstructural data using a theory extended for hexagonal close packed crystals, which accounts for basal, prismatic and pyramidal ⟨ c + a ⟩ type dislocation content. The Ti7Al samples have been mechanically pre-strained to two different strain levels, and will then be strained along the same axis in uniaxial tension during simulation. Both inter- and intragranular GNDs across the microstructures have been characterized, with a large contribution of pyramidal ⟨ c + a ⟩ GNDs, consistent with the relative slip activity involved in pre-straining. The spatially resolved crystallographic GND distributions within the 3D microstructures are used to instantiate a microstructure model for forward modeling deformation simulations by a dislocation density hardening elasto-viscoplastic fast Fourier transform framework. Coarsening the voxel resolution during the initial microstructure construction procedure is shown to strongly impact both the magnitude and spatial distribution of the GNDs and in turn the forward deformation response of the pre-strained material. This study indicates that the voxel resolution desired when transferring from measured to model microstructures need not only be proportionally scaled with the microstructure but also sufficiently fine to capture the subgranular orientation gradients that may already be present in the material.

Materials Science↗

DOE OSTI2022

Investigation of twin growth mechanisms in precipitate hardened AZ91

Here, in this work, an elasto-viscoplastic fast-Fourier-transform (EVP-FFT) model with a dislocation-density (DD) based hardening law is employed to study the growth of a {10$\bar{1}$2} tensile twin that is blocked by basal-precipitates in precipitate-hardened AZ91 magnesium alloy. It is frequently reported that twin growth is hindered in precipitate-hardened Mg alloys; however, thick twin domains are often observed experimentally in these material systems. Detailed numerical investigation of deformation twinning starting from an early propagation stage, before twin growth, reveals that the stress fields that result from two sequentially propagated twins co-impinging on a precipitate relaxes the twin back stress locally and promotes twin growth at the twin-precipitate junction. Based on these findings, a two-step growth mechanism is proposed for twins arrested by precipitates. In the first step, the interaction of a twin tip with a precipitate develops a stress concentration on the other side of the precipitate, prompting the formation of a second twin. Subsequently, the back stresses associated with the first twin are relaxed by the formation of the second twin, allowing the first twin to grow at the twin-precipitate junction and eventually engulf the precipitate. This mechanism suggests that twin growth can be achieved locally with minimal additional external forces, explaining how relatively large twin domains can develop even in the presence of arrays of precipitates.

36 MATERIALS SCIENCE↗