Search NASA⌕ Search

Engineering topics

Asayesh-Ardakani, Hasti

Publications and source records attributed to Asayesh-Ardakani, Hasti.

Cations controlled growth of β-MnO 2 crystals with tunable facets for electrochemical energy storage

Engineering crystal facets to enhance their functionalities often require complex processing routes to suppress the growth of surfaces with the lowest thermodynamic energies. Herein, we report a unique method to control the morphologies of β-MnO 2 crystals with different occupancy of {100}/{111} facets through the effect of K + cations. Combining aberration-corrected scanning transmission electron microscopy (STEM), ultramicrotomy, and dynamic functional theory (DFT) simulation, we clarified that the β-MnO 2 crystals were formed through a direct solid-state phase transition process. Increasing the concentration of K + cations in the precursor gradually changed the morphology of β-MnO 2 from bipyramid prism ({100}+{111} facets) to an octahedron structure ({111} facets). The K + cations controlled the morphology of β-MnO 2 by affecting the formation of α-K 0.5 Mn 4 O 8 intermediate phase and the subsequent phase transition. Utilizing the β-MnO 2 crystals as the cathode for Li-ion batteries showed that highly exposed {111} facets offered β-MnO 2 crystal better rate performance, with ~70% capacity retention when the charge-discharge rate increased from 20 mA/g to 200 mA/g. Furthermore, our work revealed a new mechanism to tune the morphology of this earth-abundant metal oxide crystal, which could be used to adjust its electrochemical performance for different applications, such as supercapacitors and catalysts for metal-air batteries and fuel cells.

25 ENERGY STORAGE↗

In Situ TEM Investigation of ZnO Nanowires during Sodiation and Lithiation Cycling

The development of sodium-ion batteries has drawn lots of attention recently due to the low-cost and eco-friendly sodium source. However, a fundamental understanding of the sodiation behavior for commonly used electrode materials is still limited. Here, combining in situ transmission electron microscopy, aberration-corrected scanning transmission electron microscopy, and ex situ battery cycling tests, the lithiation and sodiation behavior of ZnO nanowires is investigated. The findings show a direct correlation between the mechanical behavior of the lithiated/sodiated ZnO nanowires and their electrochemical cyclability. The mechanical brittleness of LiZn and the formation of nanocracks lead to the poor cyclability of Li-ion batteries with a ZnO anode. However, the sodiated ZnO nanowires show profuse dislocation plasticity. The observed high-density dislocations offer the sodiated ZnO anode more ductility and subsequently better cyclability than its Li-ion counterpart. The results reveal the importance of understanding the correlation between mechanical properties of battery electrodes and their cycling abilities.

Asayesh-Ardakani, Hasti↗

Energy-driven surface evolution in beta-MnO 2 structures

Exposed crystal facets directly affect the electrochemical/catalytic performance of MnO 2 materials during their applications in supercapacitors, rechargeable batteries, and fuel cells. Currently, the facet-controlled synthesis of MnO 2 is facing serious challenges due to the lack of an in-depth understanding of their surface evolution mechanisms. Here, combining aberration-corrected scanning transmission electron microscopy (STEM) and high-resolution TEM, we revealed a mutual energy-driven mechanism between beta-MnO 2 nanowires and microstructures that dominated the evolution of the lateral facets in both structures. The evolution of the lateral surfaces followed the elimination of the {100} facets and increased the occupancy of {110} facets with the increase in hydrothermal retention time. Both self-growth and oriented attachment along their {100} facets were observed as two different ways to reduce the surface energies of the beta-MnO 2 structures. High-density screw dislocations with the 1/2 < 100 > Burgers vector were generated consequently. As a result, the observed surface evolution phenomenon offers guidance for the facet-controlled growth of beta-MnO 2 materials with high performances for its application in metal-air batteries, fuel cells, supercapacitors, etc.

42 ENGINEERING↗

Facet-Dependent Thermal Instability in LiCoO2

Thermal runaways triggered by the oxygen release from oxide cathode materials pose a major safety concern for widespread application of lithium ion batteries. Utilizing in situ aberration-corrected scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) at high temperatures, we show that oxygen release from LixCoO2 cathode crystals is occurring at the surface of particles. We correlated this local oxygen evolution from the LixCoO2 structure with local phase transitions spanning from layered to spinel and then to rock salt structure upon exposure to elevated temperatures. Ab initio molecular dynamics simulations (AIMD) results show that oxygen release is highly dependent on LixCoO2 facet orientation. While the [001] facets are stable at 300 degrees C, oxygen release is observed from the [012] and [104] facets, where under-coordinated oxygen atoms from the delithiated structures can combine and eventually evolve as O-2. The novel understanding that emerges from the present study piovides in-depth insights into the thermal runaway mechanism of Li-ion batteries and can assist the design and fabrication of cathode crystals with the most thermally stable facets.

ab initio molecular dynamics↗

Ultrafast and Highly Reversible Sodium Storage in Zinc-Antimony Intermetallic Nanomaterials

The progress on sodium-ion battery technology faces many grand challenges, one of which is the considerably lower rate of sodium insertion/deinsertion in electrode materials due to the larger size of sodium (Na) ions and complicated redox reactions compared to the lithium-ion systems. Here, it is demonstrated that sodium ions can be reversibly stored in Zn-Sb intermetallic nanowires at speeds that can exceed 295 nm s -1 . Remarkably, these values are one to three orders of magnitude higher than the sodiation rate of other nanowires electrochemically tested with in situ transmission electron micro­scopy. It is found that the nanowires display about 161% volume expansion after the first sodiation and then cycle with an 83% reversible volume expansion. Despite their massive expansion, the nanowires can be cycled without any cracking or facture during the ultrafast sodiation/desodiation process. Additionally, most of the phases involved in the sodiation/desodiation process possess high electrical conductivity. More specifically, the NaZnSb exhibits a layered structure, which provides channels for fast Na + diffusion. This observation indicates that Zn-Sb intermetallic nanomaterials offer great promise as high rate and good cycling stability anodic materials for the next generation of sodium-ion batteries.

Nie, Anmin↗

Asynchronous Crystal Cell Expansion during Lithiation of K + -Stabilized α-MnO 2

alpha-MnO2 is a promising material for Li-ion batteries and has unique tunneled structure that facilitates the diffusion of Li+. The overall electrochemical performance of a-MnO2 is determined by the tunneled structure stability during its interaction with Li+, the mechanism of which is, however, poorly understood. In this paper, a novel tetragonal-orthorhombic-tetragonal symmetric transition during lithiation of K+-stabilized a-MnO2 is observed using in situ transmission electron microscopy. Atomic resolution imaging indicated that 1 x 1 and 2 x 2 tunnels exist along c ([001]) direction of the nanowire. The morphology of a partially lithiated nanowire observed in the ?100? projection is largely dependent on crystallographic orientation ([100] or [010]), indicating the existence of asynchronous expansion of alpha-MnO(2)s tetragonal unit cell along a and b lattice directions, which results in a tetragonal-orthorhombic-tetragonal (TOT) symmetric transition upon lithiation. Such a TOT transition is confirmed by diffraction analysis and Mn valence quantification. Density functional theory (DFT) confirms that Wyckoff 8h sites inside 2 x 2 tunnels are the preferred sites for Li+ occupancy. The sequential Li+ filling at 8h sites leads to asynchronous expansion and symmetry degradation of the host lattice as well as tunnel instability upon lithiation. These findings provide fundamental understanding for appearance of stepwise potential variation during the discharge of Li/alpha-MnO2 batteries as well as the origin for low practical capacity and fast capacity fading of alpha-MnO2 as an intercalated electrode.

36 MATERIALS SCIENCE↗