Search NASASearch

Engineering topics

Ash, Robert

Publications and source records attributed to Ash, Robert.

Sustainable Mars Sample Return

The proposed Mars sample return mission will be completed using natural Martian resources for the majority of its operations. The system uses the following technologies: In-Situ Propellant Production (ISPP), a methane-oxygen propelled Mars Ascent Vehicle (MAV), a carbon dioxide powered hopper, and a hydrogen fueled balloon system (large balloons and small weather balloons). The ISPP system will produce the hydrogen, methane, and oxygen using a Sabatier reactor. a water electrolysis cell, water extracted from the Martian surface, and carbon dioxide extracted from the Martian atmosphere. Indigenous hydrogen will fuel the balloon systems and locally-derived methane and oxygen will fuel the MAV for the return of a 50 kg sample to Earth. The ISPP system will have a production cycle of 800 days and the estimated overall mission length is 1355 days from Earth departure to return to low Earth orbit. Combining these advanced technologies will enable the proposed sample return mission to be executed with reduced initial launch mass and thus be more cost efficient. The successful completion of this mission will serve as the next step in the advancement of Mars exploration technology.

Alston, Christie

Enhanced Glow Discharge Production of Oxygen

Studies starting in late seventies have shown Mars atmosphere can be used as a feedstock for oxygen production using simple chemical processing systems during early phases of the Mars exploration program. This approach has been recognized as one of the most important in-situ resource utilization (ISRU) concepts for enabling future round trip Mars missions. It was determined a decade ago that separation of oxygen can be accomplished efficiently by permeation through a silver membrane at temperatures well below 1000 K. This process involves adsorption of atomic oxygen on the surface and its subsequent diffusion through a silver lattice via an oxygen concentration gradient. We have determined recently that glow discharge can be used to liberate atomic oxygen from Mars atmosphere and that the oxygen can be collected through a silver permeation membrane. Recently, we demonstrated a substantial increase in energy efficiency of the process by applying a radio frequency discharge in combination with a silver permeation membrane. The experiments were performed using pure carbon dioxide in the pressure range equal to Mars surface conditions. Energy efficiency was defined as the ratio of the energy required to dissociate a unit mass of oxygen from carbon dioxide to the (electrical) energy consumed by the overall system during the dissociation and collection process. The research effort, started at NASA Langley Research Center, continued with this project. Oxygen production apparatus, built and operated under the research grant NAG1-1140 was relocated to the Atomic Beams Laboratory at ODU in July 1996, being since then in fall operation.

Ash, Robert

Extraction of oxygen from the Mars atmosphere using glow-discharge and permeation techniques

Oxygen can be extracted from carbon dioxide via thermal dissociation at elevated temperatures. However, temperatures in excess of 1000 K are needed to effect significant levels of dissociation. The experiments reported here have examined the feasibility of using a glow-discharge in low-pressure carbon dioxide to produce increased atomic oxygen yields at lower temperatures (on the order of 800 K). The experiments have shown that when silver membranes are used simultaneously as anodes for the glow discharge and as permeable membranes for oxygen separation, oxygen yields which are comparable to the permeation rates for pure oxygen, can be produced. Since the silver membrane can be employed as the electrode interface between Mars atmosphere and a stabilized-zirconia electrochemical pump, glow-discharge enhancement can be considered as a complementary technology which can be used with the zirconia-based oxygen extraction systems described previously by others. Not only can glow-discharge be used to increase oxygen yields at lowered temperatures, but it can also be considered as a possible way to avoid filtration and compression of Mars atmosphere, since the glow-discharge can be sustained in Mars ambient pressures.

Wu, Dongchuan

Some aspects of space propulsion with extraterrestrial resources

Extraterrestrial resources for space processing of chemicals, in general, and propellants, in particular, are explored quantitatively. It is seen that, for several candidate space mission scenarios, space processing of both space resources and earth-carried resources can make decisive differences in the mission success for a given payload. To fix ideas and demonstrate trends, the specific case of water splitting to extract oxygen, discard (or use without storage) the resulting hydrogen, and burn earth-carried noncryogenic liquid fuel(s) in a simple rocket motor, designed for periodic thrusting, is treated in some detail. Experimental hardware is assembled and demonstrated to perform adequately, besides showing compactness of the space-packaged 'capsule' module that is self-contained. Building upon previous studies, the concept of in situ propellant production (ISPP) is reexamined in light of more recent energy and materials technologies. Missions to comets and Mars Sample Return are mentioned as candidate scenarios. The mission duration, reliability-repairability of hardware, resource availability in low earth orbit (LEO), and the thrust requirements are considered in turn. It is seen that space storage of hydrogen for extended durations (5-10 years) involves problems that require detailed studies, besides involving many presently unanswered issues. A study of the energy option in LEO and in deep space is developed in simple terms. The different solar, radioisotope, and nuclear power sources are mentioned. Storage and handling of raw and processed chemicals are considered.

Ramohalli, Kumar