Engineering topics
Publications and source records attributed to Attanayake, Nuwan H..
Correction for ‘Carbon dioxide and nitrogen reduction reactions using 2D transition metal dichalcogenide (TMDC) and carbide/nitride (MXene) catalysts’ by Zhaodong Li et al. , Energy Environ. Sci. , 2021, 14 , 6242–6286, DOI: 10.1039/D1EE03211A.
Monolayer molybdenum disulfide (MoS 2 ) is one of the most studied two-dimensional (2D) transition metal dichalcogenides that is being investigated for various optoelectronic properties, such as catalysis, sensors, photovoltaics, and batteries. One such property that makes this material attractive is the ease in which 2D MoS 2 can be converted between the semiconducting (2H) and metallic/semi-metallic (1T/1T') phases or heavily n-type doped 2H phase with ion intercalation, strain, or excess negative charge. Using n-butyl lithium (BuLi) immersion treatments, we achieve 2H MoS 2 monolayers that are heavily n-type doped with shorter immersion times (10–120 mins) or conversion to the 1T/1T' phase with longer immersion times (6–24 h); however, these doped/converted monolayers are not stable and promptly revert back to the initial 2H phase upon exposure to air. To overcome this issue and maintain the modification of the monolayer MoS 2 upon air exposure, we use BuLi treatments plus surface functionalization p-(CH 3 CH 2 ) 2 NPh-MoS 2 (Et 2 N-MoS 2 )—to maintain heavily n-type doped 2H phase or the 1T/1T' phase, which is preserved for over two weeks when on indium tin oxide or sapphire substrates. We also determine that the low sheet resistance and metallic-like properties correlate with the BuLi immersion times. These modified MoS 2 materials are characterized with confocal Raman/photoluminescence, absorption, x-ray photoelectron spectroscopy as well as scanning Kelvin probe microscopy, scanning electrochemical microscopy, and four-point probe sheet resistance measurements to quantify the differences in the monolayer optoelectronic properties. We will demonstrate chemical methodologies to control the modified monolayer MoS 2 that likely extend to other 2D transition metal dichalcogenides, which will greatly expand the uses for these nanomaterials.
Improving the carbon dioxide and nitrogen reduction reactions (CO 2 RR and NRR) can reduce anthropogenic greenhouse gas emissions while selectively producing chemicals needed for the fuel, plastic, and chemical industries. Efficient CO 2 RR can be used to replace fossil fuels as well as repurpose captured CO 2 , while new NRR pathways can be used to supplement or replace the energy intensive Haber–Bosch process for NH 3 generation with no CO 2 emissions. Therefore, this review article focuses on (photo)electrocatalytic and photocatalytic conversion of CO 2 and N 2 molecules into useful products, such as carbon monoxide, methanol, formic acid, and ammonia, using 2D transition metal dichalcogenides (TMDCs) and metal carbides/nitrides (MXenes). Additionally, these highly tunable 2D catalysts will be evaluated for their ability to selectively and efficiently undergo CO 2 RR and NRR by controlling defects, phases, edge sites, interfaces, and functional groups. We first address the CO 2 RR and NRR challenges, with a particular focus on theoretical mechanisms and minimum energy pathways. We follow this discussion with a detailed review of state-of-the-art 2D TMDC and MXene experimental catalysts for CO 2 RR and NRR (photo)electrocatalytic and photocatalytic reactions, and then address areas of opportunity for these catalytic reactions.
Direct electrochemical production of dissolved ozone could potentially provide economic wastewater treatment and sanitation or a valuable chemical oxidant. Although Ni-Sb-SnO 2 electrocatalysts have the highest known faradaic efficiencies for electrochemical ozone production, the activity and selectivity are not yet sufficient for commercial implementation. This report finds that co-doping Ni and Gd increases the ozone selectivity by a factor of three over Ni alone. These findings are the first demonstration of an active dopant other than Ni in SnO 2 . Electrochemical and physical characterization show that trends in ozone activity are caused by chemical catalysis, not morphology effects, and that conduction band alignment is not a catalytic descriptor for the system. Selective radical quenching experiments and quantum chemistry calculations of thermodynamic energies suggest that the kinetic barriers to form solution-phase intermediates are important for understanding the role of dopants in electrochemical ozone production.
Mo 2 C and Ti 3 C 2 MXenes were investigated as earth-abundant electrocatalyts for the CO 2 reduction reaction (CO 2 RR). Mo 2 C and Ti 3 C 2 exhibited faradaic efficiencies of 90% (250 mV overpotential) and 65% (650 mV overpotential), respectively, for the reduction of CO 2 to CO in acetonitrile using an ionic liquid electrolyte. The use of ionic liquid 1-ethyl-2-methylimidazolium tetrafluoroborate as an electrolyte in organic solvent suppressed the competing hydrogen evolution reaction. Density functional theory (DFT) calculations suggested that the catalytic active sites are oxygen vacancy sites on both MXene surfaces. Also, a spontaneous dissociation of adsorbed COOH species to a water molecule and adsorbed CO on Mo 2 C promote the CO 2 RR.
Not provided.