Engineering topics
Avramova, M.
Publications and source records attributed to Avramova, M..
CTF Validation and Verification: Version 4.4
Coolant-Boiling in Rod Arrays- Two Fluids (COBRA-TF) is a thermal/hydraulic (T/H) simulation code designed for light water reactor (LWR) analysis. It uses a two-fluid, three-field (i.e., fluid film, fluid drops, and vapor) modeling approach. Both subchannel and 3D Cartesian forms of nine conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and has been used and modified by several institutions over the last several decades. COBRA-TF is also used at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Modeling Group (RDFMG) and has been improved, updated, and subsequently became the CTF. One part of the improvement process includes validating the methods in CTF. This document seeks to provide a certain level of certainty and confidence in the predictive capabilities of the code for the scenarios it was designed to model—rod bundle geometries with operating conditions that are representative of prototypical pressurized water reactor (PWR)s and boiling water reactor (BWR)s in both normal and accident conditions. This is done by modeling a variety of experiments that simulate these scenarios and then presenting a qualitative and quantitative analysis of the results that demonstrates the accuracy to which CTF is capable of capturing specific quantities of interest.
Phase 1 Specifications and preliminary sensitivity analyses of the OECD-NRC liquid metal fast reactor core thermal-hydraulics benchmark
The developments in wire-wrapped fuel bundle thermal-hydraulics research have become increasingly diverse and this makes comparisons across studies difficult. This paper describes an ongoing benchmark that will address this issue by directly comparing computational results with experimental data from two unique wire-wrapped thermal-hydraulic facilities. Preliminary subchannel sensitivity / uncertainty analyses show largely expected behavior for the presented cases, where rod diameter and friction factor show the greatest sensitivities to geometrical perturbations. Guidelines for computational fluid dynamics evaluations have been prepared and highlight the need for consolidated modeling strategies. (authors)
Development of a high-fidelity multi-physics coupling between MCNP6.2 and CTF4.0 for VVER applications
Ensuring system safety in the design, licensing, and operation phases is a priority in the nuclear industry. Performing extensive, full-scale reactor safety experiments is often prohibitive due to the large associated costs. Computational simulations offer an alternative safety analysis method, typically with significant cost reductions. Recent high-level developments in technology and increased availability of computational resources have allowed the development of high-fidelity, high-resolution multi-physics coupled codes. Such developments may be used to generate reference models for deterministic core calculations. Under this framework, the high-fidelity continuous energy Monte Carlo-based neutron transport code MCNP6.2 was coupled externally with the state-of-the-art thermal-hydraulics subchannel code, CTF4.0 for VVER (Water-Water Energetic Reactor) applications. A VVER-1000 fuel assembly model was used to demonstrate the capability of the coupled code. The converged coupled solution is compared to initial results, consisting of the first MCNP evaluation and first CTF evaluation after initialization. The VVER-1000 type assembly results are compared to other evaluations of the same assembly model. The findings indicate good agreement with expectations and reference cases, where available. The initial results of the coupled MCNP6.2/CTF4.0 calculations at the assembly level for steady-state calculations are presented in this study, which may support future work toward high-fidelity coupled full-core modeling capabilities. The multi-physics model may be further improved, enhanced, and expanded for both cycle depletion and transient applications. Such a multi-physics system will also be applicable to the VVER-1200 and other triangular lattice designs and support their deployment and operation safely and economically. (authors)
Status of the OECD/NEA Watts Bar unit 1 benchmark and calculations of local reactor core power data of the Zero Power physics tests
The paper aims to provide an update on the status of the Organization for Economic Cooperation and Development (OECD) / the Nuclear Energy Agency (NEA) Tennessee Valley Authority (TVA) Watts Bar 1 (WB1) Multi-Physics Multi-Cycle depletion benchmark and the results associated with Exercise 1. The benchmark relies on the set of benchmark progression problems developed by the Department of Energy (DOE) Consortium for the Advanced Simulation of Light Water Reactors (CASL) for the Virtual Environment for Reactor (VERA), which are based on real plant design and operational data. The OECD/NEA TVA WB1 benchmark is designed for validation of both traditional and novel high-fidelity multi-physics codes to analyze Pressurized Water Reactors (PWR) depletion cycles. The activities are conducted under the Expert Group on Reactor Systems Multi-Physics (EGMUP) at NEA/OECD. In this work, we analyze Exercise 1 of the benchmark: stand-alone Three-Dimensional (3D) neutronics at Start-up Zero Power Physics Test (ZPPT) at Hot Zero Power Conditions (HZP) and the resulting power maps. The code used to model the exercise is the continuous energy Monte Carlo code Serpent 2.1.31 along with the nuclear data library ENDF/B-VII.1. Serpent results are compared with the high-fidelity deterministic code MPACT, which is part of VERA. The paper presents three selected results from power calculations required output. The results compared are the normalized axially integrated radial core power maps, the normalized axial averaged core power shapes, and the normalized core hottest and coldest assemblies radial power maps. The Root Mean Square Deviation (RMSD) between Serpent and MPACT is 0.51 % for the axially integrated radial core power map, 1.41 % for the axial averaged core power shape, 2.42 % for the hottest assembly axial power shape, 0.88 % for the coldest assembly axial integrated hottest assembly radial pin power map, and 0.17 % for the axially integrated coldest assembly radial pin power map. (authors)
OECD/NEA MPCMIV Benchmark - Preliminary fuel performance results
The on-going OECD/NEA Multi-physics Pellet Cladding Mechanical Interaction Validation (MPCMIV) benchmark aims to provide guidance on multi-physics validation through the modelling of two cold ramps. In this paper, the first results for the base irradiation of the father rod and fuel rodlet (refabricated from the father rod), and the first cold ramp are presented. The base irradiation consists of 3 years of irradiation in the Forsmark-2 reactor. The cold ramp encompasses a steady-state pre-ramp period of less than one hour at a low constant linear heat rate (LHR) followed by a ramp test (< 1 min) with a much higher maximal LHR. The base irradiation is modelled using the fuel performance codes FRAPCON and FAST, while the cold ramp modeling is using the fuel performance code FRAPTRAN. Several missing parameters for FRAPCON/FAST base irradiation models have been selected using multiple references such as the OECD/NEA light water reactor Uncertainty Analysis in Modelling (UAM) benchmark specifications and the FRAPCON Integral Assessment report. The obtained results for the base irradiation such as the cladding outer diameter show reasonable agreement with the experimental measurements. The results for the cold ramp show larger differences with the experimental measurements (e.g., cladding axial elongation). However, such differences have been observed as well in other studies involving pellet cladding mechanical interaction analyses and are attributed to the fuel performance modelling assumptions and to the tuned modelling parameters that were not covered by the specifications. Uncertainty and sensitivity analysis might allow a better quantification of these missing parameters. (authors)
Quantification of the importance of the modeling fidelity in the Best Estimate Plus Uncertainty analysis
In this work, the multi-physics coupling of CTF-PARCS for both steady-state and transient simulations is evaluated focusing on the quantification of the importance of the modeling fidelity when applied to the Best Estimate Plus Uncertainty safety analysis. For the steady-state, a Picard iteration approach is adopted in the coupled code while for the transient an explicit approach has been developed as a first step. The CTF-PARCS coupling is applied to the REA at HFP BOC scenario proposed in the exercise I-2c of LWR-UAM benchmark Phase III. Two different modeling choices are investigated for the nominal calculations. The first consists of including the 3D burnup information in CTF, and the second of modeling the spacers grids in both PARCS and CTF. It is observed that due to the degradation of the fuel thermal conductivity, the 3D burnup inclusion in CTF leads to significant higher centerline temperatures than the base case, with a difference up to 300 K. The spacer grids modeling shows the expected power and temperature decrease in the axial positions of the spacer grids. For the uncertainty quantification study, the multi-physics modeling including the burnup information in CTF is used. The results show that the inserted reactivity has a relative standard deviation of 13.6% mainly attributed to the nuclear data. The maximum linear power has a relative standard deviation of 16.2% due to the nuclear data as well, while the maximum centerline temperature has a relative standard deviation of 3.5% primarily caused by the fuel thermal conductivity. (authors)
Machine Learning-based Prediction of Departure from Nucleate Boiling Power for the PSBT Benchmark
Machine Learning (ML) has seen an exponential growth in its applications due to its advanced data driven prediction capabilities. The study presents a data-driven approach as a preliminary attempt to predict the power at which departure from nucleate boiling (DNB) occurs in pressurized water reactors (PWRs) by constructing an advanced ML algorithm that takes outlet pressure, inlet temperature and inlet mass flux as the input features. DNB is a critical heat flux (CHF) phenomenon seen in PWRs. The experimental data from the PWR subchannel and bundle tests (PSBT) benchmark is first used to train an artificial neural network (ANN) to predict the DNB power, which produces a root mean square error (RMSE) of 6.89 kW/m when tested on a blind subset of the PSBT data. Since the PSBT dataset is relatively small to train an accurate ANN, a data augmentation methodology based on generative adversarial networks (GANs) is used to expand the training dataset. By assuming that the real data follows a certain distribution, GANs try to learn that underlying distribution to generate similar synthetic data to augment the database and to improve the predictive capabilities of the ANN. The data generated from GANs are validated using 1-nearest neighbor and kernel maximum mean discrepancy. To further ensure data from GAN is similar to PSBT, the data is tested and filtered out using the sub-channel thermal-hydraulic code CTF. The results indicate that with the addition of 120 data points from GAN the RMSE reduces to 4.84 kW/m showing promising results for future developments.
CTF Theory Manual (V.4.2)
Coolant-Boiling in Rod Arrays—Two Fluids (COBRA-TF) is a thermal/hydraulic (T/H) simulation code designed for light water reactor (LWR) vessel analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of 9 conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and had been used and modified by several institutions over the last few decades. COBRA-TF also found use at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Modeling Group (RDFMG) and has been improved, updated, and subsequently re-branded as CTF. As part of the improvement process, it was necessary to generate sufficient documentation for the open-source code which had lacked such material upon being adopted by RDFMG. This document serves mainly as a theory manual for CTF, detailing the many two-phase heat transfer, drag, and important accident scenario models contained in the code as well as the numerical solution process utilized. Coding of the models is also discussed, all with consideration for updates that have been made when transitioning from COBRA-TF to CTF. Further documentation outside of this manual is also available at RDFMG which focus on code input deck generation and source code global variable and module listings
CTF User's Manual (V.4.2)
This document describes how a user should go about using the CTF pre-processor tool to create an input deck for modeling rod-bundle geometry in CTF. The tool was designed to generate input decks in a quick and less error-prone manner for CTF. The pre-processor is a completely independent utility, written in Fortran, that takes a reduced amount of input from the user. The information that the user must supply is basic information on bundle geometry, such as rod pitch, clad thickness, and axial location of spacer grids - the pre-processor takes this basic information and determines channel placement and connection information to be written to the input deck, which is the most time-consuming and error-prone segment of creating a deck. Creation of the model is also more intuitive, as the user can specify assembly and water-tube placement using visual maps instead of having to place them by determining channel/channel and rod/channel connections. As an example of the benefit of the pre-processor, a quarter-core model that contains 500,000 scalar-mesh cells was read into CTF from an input deck containing 200,000 lines of data. This 200,000 line input deck was produced automatically from a set of pre-processor decks that contained only 300 lines of data.
CTF Validation and Verification (V.4.2)
Coolant-Boiling in Rod Arrays- Two Fluids (COBRA-TF) is a thermal/hydraulic (T/H) simulation code designed for Light Water Reactor (LWR) analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of nine conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and has been used and modified by several institutions over the last several decades. COBRA-TF is also used at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Modeling Group (RDFMG) and has been improved, updated, and subsequently became the PSU RDFMG version of COBRA-TF (CTF). One part of the improvement process includes validating the methods in CTF. This document seeks to provide a certain level of certainty and confidence in the predictive capabilities of the code for the scenarios it was designed to model-rod bundle geometries with operating conditions that are representative of prototypical Pressurized Water Reactor (PWR)s and Boiling Water Reactor (BWR)s in both normal and accident conditions. This is done by modeling a variety of experiments that simulate these scenarios and then presenting a qualitative and quantitative analysis of the results that demonstrates the accuracy to which CTF is capable of capturing specific quantities of interest.
CTF 4.0 Validation and Verification
Coolant-Boiling in Rod Arrays- Two Fluids (COBRA-TF) is a Thermal/Hydraulic (T/H) simulation code designed for Light Water Reactor (LWR) analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of nine conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and has been used and modified by several institutions over the last several decades. COBRA-TF is also used at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Modeling Group (RDFMG) and has been improved, updated, and subsequently became the PSU RDFMG version of COBRA-TF (CTF). One part of the improvement process includes validating the methods in CTF. This document seeks to provide a certain level of certainty and confidence in the predictive capabilities of the code for the scenarios it was designed to model—rod bundle geometries with operating conditions that are representative of prototypical Pressurized Water Reactor (PWR)s and Boiling Water Reactor (BWR)s in both normal and accident conditions. This is done by modeling a variety of experiments that simulate these scenarios and then presenting a qualitative and quantitative analysis of the results that demonstrates the accuracy to which CTF is capable of capturing specific quantities of interest.
OECD-NEA Expert Group on Multi-Physics Experimental Data, Benchmarks and Validation
Explore the source record for details and available documents.
OECD/NEA EGMPEBV Activities in Multi-Physics Verification and Validation
The Expert Group on Multi-Physics Experimental Data, Benchmarks and Validation (EGMPEBV) was established in 2014 by the Nuclear Energy Agency (NEA) at the Organization for Economic Co-operation and Development (OECD) to establish processes for certification of experimental data and development of benchmark models for validation of Multi-Physics (MP) Modeling and Simulation (M and S) computational systems. The aim of the group is to provide member countries with guidelines and recommendations for validating and improving their novel multi-physics simulations, and with an access to key experimental data. To be used to their full potential, these novel tools will require a more complex suite of validation experiments due to the multiple energy, spatial and temporal scales, as well as the number of physical phenomena being simulated. They will also require accurate measurements of all terms, including coupling terms representing the feedback effects, in situations where the appropriate experimental techniques and facilities might not exist today. However, the ability to conduct validation experiments has for certain applications progressed at a slower pace than for computational methods, or in some cases it has significantly regressed (through shutdown of facilities, or through retirement of experts). In addition, as modelling capabilities are reaching deeper levels in single physics phenomena and in coupled behaviors, appropriate experimental techniques may not yet exist. Validation of multiple physics models requires a wide variety of experimental data, which emphasizes the importance of maximizing the use of historically accumulated data to avoid the significant cost of performing similar experiments today. Moreover, the pedigree and quality of this data as it pertains to modern day simulation methods may be insufficient for rigorous validation of high fidelity modeling and simulation tools. Thus, these data can often exhibit limitations including a lack of measurement accuracy or a lack of knowledge of the measurement uncertainty in the experimental techniques; an absence of measurements for some critical parameters; an obscuring of relationships between individual physics phenomena owing to the output data resolution; or simply an inability to allow for a detailed reinterpretation of the experiments based on the documented information. The organization of the EGMPEBV relies on three Task Forces, focused on 1) Experimental Data Qualification and Benchmark Evaluation; 2) Methods and Standards, and 3) Specific Applications. Task Force 1 is focused on providing better and more accurate experimental datasets, which support validation of high-fidelity multi-physics modelling and simulation (M and S) tools. At the same time it has to consider the incompleteness of past experimental data sets (in terms of data, documentation, or uncertainties) and with the limited number of available multi-physics experimental facilities. Task Force 2 is designed to develop validation methods and guidelines, and uncertainty qualification for the new family of multi-physics, multi-scale codes in the context of emerging demands such as longer fuel cycles and power uprate. Task Force 3 is focused on applications of validation experiments and has the objective to organize multi-physics M and S benchmarks involving validation experiments.
A new model for active nucleation site density in boiling systems
A new model for active nucleation site density in boiling systems has been developed. The model is based on parametric analysis of existing experimental data and is a function of wall superheat, pressure, and contact angle. The model is applicable for a wide pressure range - from 0.101 MPa to 19.8 MPa. Preliminary studies of temperature dependency of the contact angle have also been performed. The new model is intended to improve the predictions of the interfacial area concentration in two-fluid models and the wall temperature in subcooled boiling simulations. Validation activities have shown that the active nucleation site density predicted by the new model is in a good agreement with various published experimental data, and have demonstrated the achieved improvements as compared to existing models. (authors)
Multi-physics and multi-scale benchmarking and uncertainty quantification within OECD/NEA framework
Not Available
Investigation of the effects of soluble boron tracking on coupled CTF / NEM, LWR simulations
The primary objective of this study is to evaluate the effects of introducing a boron tracking capability to the COBRA-TF / NEM code coupling. The Pennsylvania State University (PSU) versions of COBRA-TF - CTF, and Nodal Expansion Method (NEM) codes are utilized. Previous implementations of the CTF / NEM coupled code had no capability to model soluble boron feedback effects due to boron transport. This study builds upon the validation and qualification efforts of the boron tracking model implementation in CTF by modeling the boron feedback calculated by the CTF boron tracking model in NEM. The core model chosen for this study is the Purdue MOX/UO{sub 2} core model used in the 2007 OECD/NRC code benchmark study. Following the implementation of an explicit online coupling scheme and accompanying k-search routine, the newly coupled CTF / NEM code version with boron tracking is compared to prior results of the non-boron tracking CTF / NEM code version at steady-state hot full power and hot zero power conditions. It was found that the boron tracking model exhibited little influence on the hot zero power result as expected due to a smaller heat flux, which does not significantly change the moderator density and boron concentration as the moderator travels up the axial core length. Meanwhile the boron tracking model had a much greater impact on the hot full power results, predicting the critical inlet boron concentration to be 9.9 ppm below the non-boron tracking result due to greater and more rapid changes in boron concentration corresponding to the reduction in moderator density from being more rapidly heated. (authors)
Coupling procedure for TRANSURANUS and KTF codes
The nuclear industry aims to ensure safe and economic operation of each single fuel rod introduced in the reactor core. This goal is even more challenging nowadays due to the current strategy of going for higher burn-up (fuel cycles of 18 or 24 months) and longer residence time. In order to achieve that goal, fuel modeling is the key to predict the fuel rod behavior and lifetime under thermal and pressure loads, corrosion and irradiation. In this context, fuel performance codes, such as TRANSURANUS, are used to improve the fuel rod design. The modeling capabilities of the above mentioned tools can be significantly improved if they are coupled with a thermal-hydraulic code in order to have a better description of the flow conditions within the rod bundle. For LWR applications, a good representation of the two phase flow within the fuel assembly is necessary in order to have a best estimate calculation of the heat transfer inside the bundle. In this paper we present the coupling methodology of TRANSURANUS with KTF (Karlsruhe Two phase Flow subchannel code) as well as selected results of the coupling proof of principle. (authors)