Engineering topics

Awasthi, Utsav

Publications and source records attributed to Awasthi, Utsav.

3 records

DOE OSTI2022

Multi‐objective optimization for cost‐efficient and resilient machining under tool wear

Abstract With the onset and rapid growth of smart manufacturing, there is a constant increase in the demand for automation technologies to enhance productivity while providing uninterrupted, cost‐efficient, and resilient machining. Traditional manufacturing systems, however, suffer from several losses due to machine faults and degradation. Specifically, tool wear directly impacts the precision and quality of the milled parts, which causes an increase in the scrap production. Hence, more attempts are required to meet the desired quota of successful parts, which in turn results in wasted material, longer delays, further tool degradation, and higher energy, machining, and labor costs. As such, this paper develops a multi‐objective optimization framework to generate the optimal control set points (e.g., feed rate and width of cut) that minimize the total cost of machining operations resulting from multiple contradictory cost functions (e.g., material, energy, tardiness, machining, labor, and tool) in the presence of tool wear. Notably, we estimate the total expected cost in dollars, which provides automatic and intuitive weighting in this multi‐objective formulation. The optimization framework is tested on a high‐fidelity face milling model that has been validated on real data from industry. Results show significant dollar savings of up to as compared to the default control scheme.

Wilson, James P.↗

DOE OSTI2022

Physics-based modeling and information-theoretic sensor and settings selection for tool wear detection in precision machining

Precision machining of metals is an energy intensive process with applications and impacts across the manufacturing industry. The energy efficiency, product yield, and maintenance of the precision machine require a digital twin that can assist with prognostics and health management. In this report a physics-based model is developed and validated against face milling data, and then used for the timely and precise inference of machining faults that cannot be measured directly. Computer numerical control (CNC) measurements of power and force are used through this physics-based machining model to predict deviations of the outputs of power consumption and cutting forces during normal operation. A model-based fault detection and isolation methodology is applied to determine the optimal (traditional and available) sensor suite and the test settings (admissible input values) that improve the inference of tool wear in face milling. The optimal sensor suite and input test settings are obtained by solving a mixed integer non-linear program that optimizes information-theoretic metrics relevant to the detection and isolation of tool wear from steady-state or transient machining measurements. Dynamic time warping and k—NN classification are then used to validate the robustness of the optimal design for fault detection test design, including the optimal sensor suite.

42 ENGINEERING↗

DOE OSTI2022

Hybrid data-driven and model-informed online tool wear detection in milling machines

Precision machining tool wear is responsible for low product throughput and quality. Monitoring the tool wear online is vital to prevent degradation in machining quality. However, direct real-time tool wear measurement is not practical. This paper presents residual-based anomaly detection models, combining a hybrid model comprised of a physics-based model and a data-driven model (a decision tree or a neural network) to predict signals of interest (e.g., power or forces) under nominal conditions, followed by Page’s cumulative sum test for detecting tool wear on-line using the computer numerical control machine measurements. The most informative features are ranked using dynamic programming and its approximation variants from real-time measurements and machine settings, such as the width of cut, depth of cut, feed rate and spindle speed, that serve as inputs to the predictive models. The baseline nominal model is incrementally updated with experimental data via a gradient boosted adaptation model to generate the residuals that account for discrepancies between the actual machine data under normal conditions and the baseline nominal model predictions. The hybrid model is validated against 20 Mazak milling machine experimental tests and one Haas run-to-failure experiment. The proposed anomaly detector is applied to synthetic data from simulations of the physics-based model at different operating conditions, measurement noise levels, and tool wear levels, and the methods were able to achieve an overall 92% accuracy in data with 1% noise. The anomaly detection methods based on hybrid model reduced the false alarms of either the data-driven or physical-based models alone, and are found to be capable of good online detection of tool wear.

42 ENGINEERING↗